Tag Archives: china chains

China wholesaler Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface, Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

sprocket gear

What safety precautions should be taken when working with sprocket gear assemblies?

Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:

1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.

2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.

3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.

4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.

5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.

6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.

7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.

8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.

9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.

10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.

11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.

12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.

By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.

sprocket gear

What are the best practices for cleaning and maintaining sprocket gears?

Proper cleaning and maintenance are essential for ensuring the longevity and efficient performance of sprocket gears. Here are the best practices for cleaning and maintaining sprocket gears:

1. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear’s lifespan.

2. Cleaning: Clean the sprocket gears regularly to remove dirt, debris, and contaminants that can accelerate wear. Use a soft brush or cloth to clean the sprocket teeth and the surrounding areas.

3. Avoid Harsh Chemicals: When cleaning sprocket gears, avoid using harsh chemicals or solvents that can damage the surface finish or compromise the material’s integrity. Stick to recommended cleaning agents by the manufacturer.

4. Lubrication: Proper lubrication is crucial to reducing friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer’s recommendations for lubrication intervals.

5. Correct Tension: Maintain the correct chain tension to prevent excessive wear on both the sprocket and the chain. Ensure the chain is not too loose or too tight, as both conditions can cause premature wear.

6. Alignment: Check and maintain proper alignment between the sprocket gear and the chain. Misalignment can cause uneven wear and premature failure.

7. Material Selection: Choose sprocket gears made from high-quality and durable materials that are suitable for the specific operating conditions of the application.

8. Overload Prevention: Operate sprocket gears within their recommended load-carrying capacity to prevent premature wear and failure.

9. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material’s properties and lead to accelerated wear.

10. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.

By following these best practices for cleaning and maintaining sprocket gears, you can maximize their lifespan, reduce downtime, and optimize the performance of mechanical systems that utilize them.

sprocket gear

What are the common problems faced with sprocket gears and how to troubleshoot them?

Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:

  • 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
  • Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
  • 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
  • Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
  • 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
  • Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
  • 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
  • Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
  • 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
  • Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application’s load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.

It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.

China wholesaler Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear China wholesaler Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear
editor by CX 2024-01-15

China Standard Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Mining Machinery, Sugar Machinery
Hardness: Hardened Tooth Surface, Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

sprocket gear

Can sprocket gears be used for vertical power transmission?

Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.

The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.

Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:

1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.

2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.

3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.

4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.

When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.

Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.

sprocket gear

Can sprocket gears be used in precision motion control systems?

Yes, sprocket gears can be used in precision motion control systems, but there are some considerations to keep in mind. Precision motion control systems require high accuracy, repeatability, and low backlash to achieve precise positioning and movement. Sprocket gears can meet these requirements under certain conditions:

1. Quality Manufacturing: To ensure precision, sprocket gears used in motion control systems must be of high quality and precision-manufactured. They should have accurate tooth profiles and minimal manufacturing defects.

2. Tight Tolerances: Precision motion control systems require sprocket gears with tight tolerances to minimize variations in tooth engagement. This ensures consistent motion and positioning.

3. Low Backlash: Backlash is the amount of clearance between engaged teeth, and it can cause positioning errors in motion control systems. High-quality sprocket gears with proper installation and alignment can help reduce backlash.

4. Proper Lubrication: Lubrication is critical for reducing friction and wear in precision motion control systems. Using the right lubricant in the right amount is essential for smooth and accurate operation.

5. Alignment and Maintenance: Proper alignment during installation and regular maintenance are crucial for preserving the precision of the sprocket gear system. Misalignment or wear can compromise the system’s accuracy.

It’s important to select sprocket gears that match the specific requirements of the motion control application. While sprocket gears can work well in precision motion control systems, some applications may benefit from other types of gearing systems, such as gear racks or timing belts, depending on the complexity and demands of the motion control task.

Before integrating sprocket gears into a precision motion control system, it’s advisable to consult with engineers or experts familiar with both the application’s requirements and the capabilities of sprocket gear systems. This will ensure that the selected gearing solution is optimized for precision and reliability in the motion control application.

sprocket gear

How do you select the right size and pitch of a sprocket gear for a specific application?

Choosing the correct size and pitch of a sprocket gear is crucial to ensure optimal performance and efficiency in a specific application. Here’s a step-by-step guide to help you make the right selection:

  1. Identify the Application Requirements: Understand the specific requirements of your application, including the desired speed, torque, power transmission, and operating conditions.
  2. Calculate the Gear Ratio: Determine the gear ratio required for your application. The gear ratio is the ratio of the number of teeth between the driving and driven sprockets and determines the speed and torque relationship between them.
  3. Consider the Pitch: The pitch of a sprocket refers to the distance between the centers of adjacent teeth. It is essential to choose sprockets with the same pitch as the chain or belt you plan to use in your transmission system.
  4. Choose the Number of Teeth: Once you have the gear ratio and pitch, calculate the number of teeth for both the driving and driven sprockets. The number of teeth affects the speed and torque characteristics of the transmission system.
  5. Verify Shaft Compatibility: Ensure that the sprocket gear’s bore size matches the diameter of your application’s input and output shafts.
  6. Consider Material and Strength: Select sprocket gears made from materials suitable for your application’s operating conditions. For heavy-duty applications, choose sprockets with high strength and wear resistance.
  7. Check Center Distance: Verify the center distance between the driving and driven sprockets to ensure proper chain or belt tension and alignment.
  8. Review Manufacturer Recommendations: Manufacturers often provide guidelines and specifications for their sprocket gears. Review their recommendations and consult with experts if necessary.
  9. Perform Regular Maintenance: Once the sprocket gear is installed, conduct regular maintenance, including lubrication and inspection, to ensure longevity and optimal performance.

Choosing the right size and pitch of a sprocket gear requires careful consideration of various factors to meet the specific needs of your application. By following these steps and consulting with experts when needed, you can select the most suitable sprocket gear for your mechanical system.

China Standard Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear China Standard Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear
editor by CX 2023-12-28

China Good quality Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Mining Machinery, Sugar Machinery
Hardness: Hardened Tooth Surface, Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

sprocket gear

Can sprocket gears be used for vertical power transmission?

Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.

The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.

Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:

1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.

2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.

3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.

4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.

When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.

Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.

sprocket gear

What are the load-carrying capacities of different sprocket gear configurations?

Load-carrying capacity is a critical factor to consider when selecting a sprocket gear configuration for a specific application. The load-carrying capacity of a sprocket gear depends on various factors, including the material and design of the sprocket, the size and number of teeth, and the type of chain used in conjunction with the sprocket.

Here are some factors that influence the load-carrying capacities of different sprocket gear configurations:

1. Material: The choice of material significantly impacts the load-carrying capacity of the sprocket gear. High-strength materials, such as hardened steel or alloy materials, are often used for heavy-duty applications, as they can withstand higher loads without deformation or failure.

2. Number of Teeth: Sprocket gears with more teeth typically distribute the load over a larger surface area, which can improve their load-carrying capacity. However, an increase in the number of teeth may also lead to higher friction losses in the system.

3. Tooth Profile: The shape of the sprocket gear teeth, such as standard or modified tooth profiles, can affect the load distribution and efficiency of the gear system.

4. Chain Type: The type of chain used with the sprocket gear is crucial in determining the overall load-carrying capacity of the system. Different chain designs, such as roller chains or silent chains, have varying load-carrying capabilities.

It is essential to consult the manufacturer’s specifications and engineering data when determining the load-carrying capacity of a particular sprocket gear configuration. Additionally, factors like the speed of operation, environmental conditions, and duty cycle should also be considered to ensure the sprocket gear is appropriately sized for the application.

In heavy-duty and high-load applications, engineers often conduct detailed calculations and simulations to ensure the sprocket gear system can handle the required loads safely and reliably. Proper maintenance and periodic inspections are essential to preserve the load-carrying capacity and extend the life of the sprocket gear system.

sprocket gear

How do you select the right size and pitch of a sprocket gear for a specific application?

Choosing the correct size and pitch of a sprocket gear is crucial to ensure optimal performance and efficiency in a specific application. Here’s a step-by-step guide to help you make the right selection:

  1. Identify the Application Requirements: Understand the specific requirements of your application, including the desired speed, torque, power transmission, and operating conditions.
  2. Calculate the Gear Ratio: Determine the gear ratio required for your application. The gear ratio is the ratio of the number of teeth between the driving and driven sprockets and determines the speed and torque relationship between them.
  3. Consider the Pitch: The pitch of a sprocket refers to the distance between the centers of adjacent teeth. It is essential to choose sprockets with the same pitch as the chain or belt you plan to use in your transmission system.
  4. Choose the Number of Teeth: Once you have the gear ratio and pitch, calculate the number of teeth for both the driving and driven sprockets. The number of teeth affects the speed and torque characteristics of the transmission system.
  5. Verify Shaft Compatibility: Ensure that the sprocket gear’s bore size matches the diameter of your application’s input and output shafts.
  6. Consider Material and Strength: Select sprocket gears made from materials suitable for your application’s operating conditions. For heavy-duty applications, choose sprockets with high strength and wear resistance.
  7. Check Center Distance: Verify the center distance between the driving and driven sprockets to ensure proper chain or belt tension and alignment.
  8. Review Manufacturer Recommendations: Manufacturers often provide guidelines and specifications for their sprocket gears. Review their recommendations and consult with experts if necessary.
  9. Perform Regular Maintenance: Once the sprocket gear is installed, conduct regular maintenance, including lubrication and inspection, to ensure longevity and optimal performance.

Choosing the right size and pitch of a sprocket gear requires careful consideration of various factors to meet the specific needs of your application. By following these steps and consulting with experts when needed, you can select the most suitable sprocket gear for your mechanical system.

China Good quality Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear China Good quality Transmission Belt Gearbox Parts Conveyor Mining Machinery DIN8187 Driving Chains Specification Standard Chain Sprockets Single Wheel Spur Gear
editor by CX 2023-12-07

China supplier Industrial Roller Chain and Sprockets Chains Wheel Single Rolling Gear

Product Description

 

Product Description

Product Description

Item Chain sprocket, Chain wheels, gears
Design Can be at the customer’ request, tailor-made, at customer’s design,OEM
Application Petrochemical industry, Mining, metallurgy, machine tools, hydra-power
Material Casting or Forged Material
45#,SAE1045,SAE4140,SAE4150,SAE4160,20CrMnTi,42CrMo, 18CrNiMo7,42CrMo,40CrNiMoA,20CrNiMoA,stainless steel 410,stainless steel 304
Treatment Forging, machining, gear hobbing
Surface treatment Quenching, oxidizing black, galvanizing, sandblasting, oil immersion, grinding
Heat treatment Tempering, high frequency quenching, carburizing quenching
Standard ANSI, DIN, ISO
Size From diameter 250mm to 1250mm
Minimum order 1 pc

Product Real Shot 

Manufacturing Process

  1. Raw material, issue material testing report100% Ultrasonic Test ASTMA388
  2. Sawing into parts  
  3. CNC lather blank.
  4. Hobbing
  5. High Frequency and Hardness test
  6. Key way, set the screw
  7. Clean and Dimensional Checking
  8. Package and Delivery.

Data Needed for Quotation
– Your own drawing
– Your requirement on material and necessary dimensional data
– Ask for recommend

 

Company Profile

  ZheJiang CZPT Machinery Co., Ltd., established in the year of 2012, is a professional supplier of material handling equipment, OEM machinery parts, various forging parts and casting parts.

  Ebon’s products scope: cranes, hoists, magnets, grabs, hooks, wheels, drums, axles, lifting beams,bearing box, bearings, couplings,flanges etc. They are applied in wide range of field: Machinery, Mining, Hydro power Transportation, Construction…..

  CZPT has 5 reliable manufacturing factories to make sure stable supply and fast delivery for your business.  

  Our products are also exported to USA, Britain, Japan, South Korea, Russia, Indonesia, Thailand, India, Vietnam, Canada, Argentina, Paraguay etc more than 50 countries.

  CZPT team is loyal and committed to your success, and firmly believes that our products and services will increase the value and effectiveness of your business with following characters:
  -Professional sales team, market promotion team and logistics team with more then 10 years experience .
  -Loyal and Responsible Characters
  -Efficient Work, Fast Response
  -Responsible Quality Control Team
  -Video the manufacturing process, the testing, and packing before delivery  
1.Q: How about your delivery time?
   A: Generally, it will take 7-30 days after receiving your advance payment. The specific delivery time depends on the items, transportation ways and the quantity of your order.

2.Q: Can you produce according to the samples?
   A: Yes, we can produce by your samples or technical drawings.

3.Q: Do you test all your goods before delivery?
   A: Yes, we have 100% Ultrasonic test, Magnetic test or Liquid Penetration test before delivery

4.Q: How do you make our business long-term and good relationship?
   A: (1) We keep good quality and competitive price to ensure our customers benefit ;
        (2) We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

5.Q: I can’t see the goods or touch the goods, how can I deal with the risk involved? 
   A: Our quality management system conforms to the requirement of ISO 9001:2015 verified by DNV. We are absolutely worth your trust. We can accept trial order to enhance mutual trust.

 

Standard Or Nonstandard: Standard
Application: Motor, Machinery, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Forging Parts
Toothed Portion Shape: Spur Gear
Material: Casting or Forged Material
Customization:
Available

|

Customized Request

sprocket gear

What are the noise and vibration levels associated with sprocket gear systems?

The noise and vibration levels associated with sprocket gear systems can vary depending on several factors. Here are some key points to consider regarding noise and vibration:

1. Gear Design: The design of the sprocket gears, including the number of teeth, pitch, and tooth profile, can influence noise and vibration levels. Gears with irregular tooth profiles or incorrect meshing can generate higher levels of noise and vibration.

2. Gear Material: The material used for manufacturing the sprocket gears can impact noise and vibration. High-quality gears made from materials with good damping properties can help reduce vibrations and noise during operation.

3. Lubrication: Proper lubrication is essential for reducing friction and wear between gear teeth. Inadequate or improper lubrication can lead to increased noise and vibration levels due to metal-to-metal contact.

4. Alignment: Misalignment between the sprocket gears can cause uneven loading and increased noise. Proper alignment ensures smooth and efficient power transmission, minimizing noise and vibration.

5. Load Distribution: Uniform load distribution among the gear teeth is crucial for smooth operation. Uneven loads can lead to noise and vibration issues.

6. Gear Condition: Wear and damage to the gear teeth over time can result in increased noise and vibration. Regular inspection and maintenance are necessary to address any wear-related issues promptly.

7. Operating Speed: Higher operating speeds can increase noise and vibration levels, especially if the gears are not properly balanced and aligned.

8. Housing and Mounting: The design and construction of the gear housing and mounting can affect noise transmission. A well-designed housing can help dampen noise and prevent vibrations from spreading to other parts of the machinery.

9. Operating Environment: The operating environment, such as temperature and humidity, can influence gear performance and noise levels.

Sprocket gear systems can be engineered and maintained to minimize noise and vibration levels. Using high-quality materials, proper lubrication, correct alignment, and regular maintenance can significantly reduce noise and vibration, ensuring smooth and efficient operation of the machinery.

sprocket gear

What are the temperature limits for the operation of sprocket gears?

Sprocket gears, like other mechanical components, have temperature limits for safe and efficient operation. The temperature limits depend on the materials used in the manufacturing of the sprocket gears and the specific application. Here are some general guidelines regarding temperature limits:

1. Standard Steel Sprocket Gears: Standard steel sprocket gears typically have a temperature range of -20°C to 150°C (-4°F to 302°F). At temperatures beyond this range, the performance and durability of the sprocket gear may be compromised.

2. Heat-Treated and Alloy Steel Sprocket Gears: Heat-treated and alloy steel sprocket gears offer improved temperature resistance and can operate within a range of -40°C to 200°C (-40°F to 392°F). These sprockets are suitable for applications with higher temperature demands.

3. Stainless Steel Sprocket Gears: Stainless steel sprocket gears are known for their corrosion resistance and can handle a broader temperature range of -80°C to 400°C (-112°F to 752°F). They are often used in extreme environments.

4. Plastic or Nylon Sprocket Gears: Plastic sprocket gears, such as those made from nylon, have lower temperature limits and are generally suitable for temperatures ranging from -40°C to 100°C (-40°F to 212°F).

5. High-Temperature Alloy Sprocket Gears: For specialized applications in high-temperature environments, sprocket gears made from high-temperature alloys can operate at temperatures exceeding 500°C (932°F).

6. Critical Temperature Considerations: When using sprocket gears near the upper temperature limits, it’s crucial to consider the potential for thermal expansion, which can affect the fit and engagement with other components in the system.

7. Extreme Conditions: In extreme cases, such as in industrial furnaces or cryogenic applications, special materials and coatings may be necessary to ensure the sprocket gears’ integrity and performance.

It is essential to select sprocket gears that can handle the expected operating temperature range of your specific application. Operating within the recommended temperature limits will ensure the sprocket gears’ efficiency, minimize wear, and prevent premature failure.

sprocket gear

What lubrication practices are recommended for sprocket gears?

Proper lubrication is crucial for the efficient and reliable operation of sprocket gears. The lubricant used should reduce friction, minimize wear, dissipate heat, and protect against corrosion. Here are some recommended lubrication practices for sprocket gears:

1. Lubricant Selection: Choose a high-quality lubricant specifically designed for sprocket gears. Look for lubricants with high film strength and anti-wear additives to protect the gear teeth from excessive wear and extend the sprocket’s lifespan.

2. Lubrication Frequency: Regularly lubricate the sprocket gears as per the manufacturer’s guidelines or equipment maintenance schedule. The frequency of lubrication depends on factors such as operating conditions, load, and environmental factors.

3. Cleanliness: Before applying new lubricant, ensure that the sprocket gears are clean and free from debris, dirt, and old lubricant. Clean the gears using a suitable solvent or cleaning agent to maximize the effectiveness of the new lubricant.

4. Proper Application: Apply the lubricant evenly and adequately to all the teeth of the sprocket gear. Ensure that the lubricant reaches the contact points between the teeth to form a protective film and reduce metal-to-metal contact.

5. Avoid Over-Lubrication: Applying excessive lubricant can lead to overheating and attract more dirt and debris, potentially causing damage to the gears. Follow the recommended lubrication quantities to avoid over-lubrication.

6. Re-Lubrication: In high-temperature or heavy-duty applications, the lubricant may degrade faster. Regularly monitor the sprocket gears for signs of insufficient lubrication, and re-lubricate as necessary.

7. Temperature Considerations: In environments with extreme temperatures, choose a lubricant with a suitable temperature range to ensure its effectiveness under those conditions.

8. Maintenance Records: Keep detailed records of the lubrication schedule, type of lubricant used, and any observations of unusual wear or performance issues. This information will help identify trends and potential problems early.

9. Inspections: Regularly inspect the sprocket gears for signs of wear, pitting, or abnormal damage. Early detection of issues allows for timely maintenance and prevents severe damage to the sprocket system.

10. Training: Ensure that personnel responsible for lubrication practices are adequately trained to apply the lubricant correctly and safely.

Following these lubrication practices will help maximize the efficiency, performance, and lifespan of sprocket gears in various mechanical systems.

China supplier Industrial Roller Chain and Sprockets Chains Wheel Single Rolling Gear China supplier Industrial Roller Chain and Sprockets Chains Wheel Single Rolling Gear
editor by CX 2023-10-03

China Professional Chain Wheel Gearbox Belt Transmission Conveyor Parts Short Pitch Precision Roller Chains Sprocket Steel Gear

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

Standard Or Nonstandard: Standard, Nonstandard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: 1045, Stainless Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket gear

What safety precautions should be taken when working with sprocket gear assemblies?

Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:

1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.

2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.

3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.

4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.

5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.

6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.

7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.

8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.

9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.

10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.

11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.

12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.

By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.

sprocket gear

How do I prevent chain elongation in a sprocket gear system?

Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:

1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain’s components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.

2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer’s guidelines for proper tensioning.

3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.

4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.

5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.

6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.

7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.

8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.

By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.

sprocket gear

Can sprocket gears be used in high-temperature environments?

Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.

High-temperature environments can pose several challenges to sprocket gears, including:

  • Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
  • Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
  • Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.

To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.

Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.

Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.

In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.

China Professional Chain Wheel Gearbox Belt Transmission Conveyor Parts Short Pitch Precision Roller Chains Sprocket Steel Gear China Professional Chain Wheel Gearbox Belt Transmission Conveyor Parts Short Pitch Precision Roller Chains Sprocket Steel Gear
editor by CX 2023-08-15

China 100% Quality Guarantee Stainless Steel Pin White Plastic Case Conveyor Chains For Heavy Cartons Transportation with Good quality

Error:获取session失败，

sprocket

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China 100% Quality Guarantee Stainless Steel Pin White Plastic Case Conveyor Chains For Heavy Cartons Transportation with Good quality China 100% Quality Guarantee Stainless Steel Pin White Plastic Case Conveyor Chains For Heavy Cartons Transportation with Good quality
editor by Cx 2023-04-26

China Sprocket for plastic modular belt YS300,conveyor chains sprocket sprocket bike part

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

Select sprocket

If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.sprocket

Roller sprocket

A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.
sprocketRoller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.

Flat hole sprocket

Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.sprocket

Steel split sprocket

Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.

China Sprocket for plastic modular belt YS300,conveyor chains sprocket sprocket bike partChina Sprocket for plastic modular belt YS300,conveyor chains sprocket sprocket bike part
editor by czh 2023-02-16

China Pilot Bore DIN8187 Conveyor Chains 304 Stainless Steel Chain Wheel and Sprocket sprocket bike shop

Product Description

SPROCKET  1/2” X 5/16”  08B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 thirteen.0mm
Radius Width C 1.3mm
Tooth Width b1 seven.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B Collection ROLLER CHAINS  
Pitch 12.7 mm
Internal Width seven.seventy five mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
eight 37.2  33.18  eight ten 10
9 forty one.0  37.13  eight ten 10
ten forty five.2  forty one.10  8 10 ten
11 48.7  forty five.07  ten 10 twelve
12 fifty three.0  forty nine.07  ten 10 12
13 fifty seven.4  fifty three.06  10 10 12
fourteen 61.8  fifty seven.07  ten ten twelve
fifteen sixty five.5  sixty one.09  ten ten 12
16 sixty nine.5  sixty five.10  ten twelve sixteen
17 seventy three.6  69.11  10 twelve sixteen
eighteen 77.8  seventy three.14  ten 12 sixteen
19 81.7  seventy seven.16  ten 12 sixteen
20 85.8  eighty one.19  ten twelve 16
21 89.7  eighty five.22  twelve 16 sixteen
22 ninety three.8  89.24  twelve 16 16
23 98.2  93.27  12 16 16
24 one zero one.8  97.29  twelve sixteen 16
25 105.8  one zero one.33  12 16 sixteen
26 110.0  one hundred and five.36  16 sixteen 16
27 114.0  109.40  16 16 16
28 118.0  113.42  sixteen 16 sixteen
29 122.0  117.46  sixteen 16 sixteen
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 twenty
32 134.3  129.56  16 16 20
33 138.4  133.60  sixteen sixteen 20
34 142.6  137.64  sixteen sixteen 20
35 146.7  141.68  16 16 twenty
36 151.0  a hundred forty five.72  sixteen twenty twenty
37 154.6  149.76  sixteen 20 twenty
38 158.6  153.80  16 20 twenty
39 162.7  157.83  sixteen twenty 20
40 166.8  161.87  16 20 twenty
41 171.4  one hundred sixty five.91  twenty twenty twenty five
42 one hundred seventy five.4  169.94  20 twenty twenty five
forty three 179.7  173.98  twenty 20 twenty five
44 183.8  178.02  twenty 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  twenty twenty 25
47 196.2  a hundred ninety.14  20 20 25
48 two hundred.3  194.18  20 twenty 25
49 204.3  198.22  20 twenty twenty five
50 208.3  202.26  twenty 20 25
51 212.1  206.30  20 twenty five twenty five
52 216.1  210.34  20 twenty five twenty five
53 220.2  214.37  20 twenty five 25
54 224.1  218.43  twenty twenty five 25
55 228.1  222.46  twenty twenty five twenty five
56 232.2  226.50  twenty 25 twenty five
fifty seven 236.4  230.54  20 twenty five twenty five
fifty eight 240.5  234.58  twenty twenty five twenty five
fifty nine 244.5  238.62  20 25 25
sixty 248.6  242.66  20 twenty five twenty five
62 256.9  250.74  twenty five 25 twenty five
64 265.1  258.82  twenty five 25 25
sixty five 269.0  262.86  25 twenty five 25
66 273.0  266.91  twenty five twenty five twenty five
68 281.0  274.99  twenty five twenty five 25
70 289.0  283.07  twenty five 25 twenty five
72 297.2  291.15  25 twenty five twenty five
75 309.2  303.28  25 25 twenty five
76 313.2  307.32  twenty five twenty five twenty five
78 321.4  315.40  twenty five 25 twenty five
80 329.4  323.49  twenty five twenty five twenty five
85 349.0  343.69  25 twenty five 25
90 369.9  363.90  twenty five twenty five twenty five
95 390.1  384.11  25 twenty five twenty five
one hundred 410.3  404.32  twenty five twenty five 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 twenty five 25
one hundred twenty 491.2  485.16  twenty five 25 twenty five
125 511.3  505.37  25 twenty five 25

Simple Data.

Type:

Simplex, Duplex, Triplex

Sprocket Design:

three/8″,1/2″,5/8″,3/4″,1″,1.twenty five”,1.50″,1.seventy five”,2.00″,2.twenty five”,2.00″,2.25″,2.fifty”, 3″

Tooth Quantity:

nine-a hundred

Regular:

ANSI , JIS, DIN, ISO

Substance:

1571, 1045, SS304 , SS316  As Per User Request.

Performance Treatment method:

Carburizing, High Frequency Remedy, Hardening and Tempering, Nitriding

Surface Therapy:

Black of Oxidation, Zincing, Nickelage.
Attribute Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so forth
Style criterion ISO DIN ANSI & Consumer Drawings
Application Industrial transmission tools
Deal Wooden Circumstance / Container and pallet, or created-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Last-check out

Sample:

ODM&OEM, Demo Buy Obtainable and Welcome
Advantage Good quality 1st, Support very first, Competitive cost, Quick delivery
Delivery Time 10 days for samples. 15 days for official order.

 

Installation AND Utilizing

The chain spocket, as a drive or deflection for chains, has pockets to keep the chain backlinks with a D-profile cross segment with flat side surfaces  parallel to the centre aircraft of the chain hyperlinks, and outer surfaces at correct angles to the chain link centre aircraft. The chain back links are pressed firmly in opposition to the outer surfaces and every single of the aspect surfaces by the angled laying surfaces at the base of the pockets, and also the assistance surfaces of the wheel human body with each other with the end sides of the webs shaped by the foremost and trailing walls of the pocket.

Discover

When fitting new chainwheels it is extremely important that a new chain is fitted at the very same time, and vice versa. Employing an old chain with new sprockets, or a new chain with aged sprockets will result in quick wear.

It is important if you are putting in the chainwheels by yourself to have the factory provider guide specific to your design. Our chainwheels are made to be a immediate alternative for your OEM chainwheels and as these kinds of, the installation should be executed according to your models provider handbook.

During use a chain will extend (i.e. the pins will put on triggering extension of the chain). Making use of a chain which has been stretched a lot more than the previously mentioned highest allowance leads to the chain to experience up the enamel of the sprocket. This leads to harm to the tips of the chainwheels tooth, as the pressure transmitted by the chain is transmitted totally by means of the prime of the tooth, instead than the total tooth. This outcomes in serious wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Expectations corporations (this kind of as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the pursuing Desk exhibits knowledge from ANSI common B29.1-2011 (Precision Electricity Transmission Roller Chains, Attachments, and Sprockets) created by the American Society of Mechanical Engineers (ASME). See the references[8][9][ten] for additional data.

ASME/ANSI B29.1-2011 Roller Chain Normal SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Normal Sizes
Size Pitch Maximum Roller Diameter Least Supreme Tensile Strength Measuring Load
twenty five .250 in (6.35 mm) .one hundred thirty in (3.thirty mm) 780 lb (350 kg) eighteen lb (8.2 kg)
35 .375 in (9.53 mm) .two hundred in (5.08 mm) one,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .five hundred in (12.70 mm) .306 in (7.77 mm) 1,five hundred lb (680 kg) eighteen lb (8.2 kg)
forty .500 in (12.70 mm) .312 in (7.ninety two mm) three,one hundred twenty five lb (1,417 kg) 31 lb (14 kg)
fifty .625 in (15.88 mm) .four hundred in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
sixty .750 in (19.05 mm) .469 in (11.ninety one mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 one.000 in (25.40 mm) .625 in (15.88 mm) 12,five hundred lb (5,700 kg) one hundred twenty five lb (fifty seven kg)
a hundred 1.250 in (31.75 mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.five hundred in (38.10 mm) .875 in (22.23 mm) 28,a hundred twenty five lb (twelve,757 kg) 281 lb (127 kg)
140 1.750 in (44.forty five mm) one.000 in (twenty five.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
a hundred and sixty two.000 in (50.80 mm) one.one hundred twenty five in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 two.250 in (57.fifteen mm) one.460 in (37.08 mm) 63,280 lb (28,seven-hundred kg) 633 lb (287 kg)
two hundred 2.five hundred in (sixty three.50 mm) one.562 in (39.sixty seven mm) seventy eight,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.twenty mm) 1.875 in (47.63 mm) 112,five hundred lb (51,000 kg) 1,000 lb (450 kg

For mnemonic reasons, beneath is another presentation of important dimensions from the exact same regular, expressed in fractions of an inch (which was part of the thinking driving the decision of chosen numbers in the ANSI normal):

Pitch (inches) Pitch expressed
in eighths		 ANSI regular
chain variety		 Width (inches)
1⁄four 2⁄eight 25 one⁄eight
three⁄8 three⁄8 35 three⁄sixteen
1⁄two 4⁄8 4one one⁄four
one⁄2 4⁄eight four 5⁄16
five⁄8 5⁄eight 5 3⁄eight
three⁄4 6⁄eight 6 1⁄two
1 eight⁄eight eight 5⁄eight

Notes:
1. The pitch is the length amongst roller centers. The width is the distance among the hyperlink plates (i.e. slightly much more than the roller width to let for clearance).
two. The right-hand digit of the common denotes 0 = regular chain, 1 = light-weight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the quantity of eighths of an inch that make up the pitch.
four. An “H” pursuing the standard quantity denotes heavyweight chain. A hyphenated quantity adhering to the regular number denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes number 60 heavyweight triple-strand chain.
 A normal bicycle chain (for derailleur gears) uses slender 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load ability. The more sprockets at the rear wheel (traditionally 3-6, today 7-12 sprockets), the narrower the chain. Chains are bought in accordance to the number of speeds they are made to perform with, for case in point, “10 velocity chain”. Hub gear or solitary velocity bicycles use 1/2″ x 1/8″ chains, the place 1/8″ refers to the highest thickness of a sprocket that can be utilised with the chain.

Generally chains with parallel shaped hyperlinks have an even number of back links, with each slender hyperlink adopted by a broad a single. Chains constructed up with a uniform variety of link, slender at 1 and broad at the other stop, can be manufactured with an odd quantity of hyperlinks, which can be an edge to adapt to a special chainwheel-length on the other aspect these kinds of a chain tends to be not so robust.

Roller chains created making use of ISO regular are often referred to as as isochains.

 

WHY Select US 
 

1. Reliable High quality Assurance Program
2. Slicing-Edge Computer-Controlled CNC Devices
three. Bespoke Options from Hugely Knowledgeable Specialists
4. Customization and OEM Offered for Particular Software
five. Substantial Stock of Spare Areas and Equipment
6. Effectively-Created Throughout the world Marketing and advertising Community
seven. Productive Right after-Sale Provider Program

 

The 219 sets of innovative automated generation gear give assures for high item high quality. The 167 engineers and technicians with senior professional titles can layout and produce goods to fulfill the specific demands of consumers, and OEM customizations are also obtainable with us. Our seem worldwide service community can offer consumers with well timed following-revenue technical services.

We are not just a company and provider, but also an business expert. We operate pro-actively with you to supply specialist tips and merchandise tips in buy to end up with a most cost successful merchandise offered for your specific application. The clientele we provide around the world assortment from finish customers to distributors and OEMs. Our OEM replacements can be substituted where ever necessary and appropriate for the two mend and new assemblies.

 

US $0.3-1
/ Piece
| 		1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8
US $0.3-1
/ Piece
| 		1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

What you need to know about sprockets

If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
sprocket

Various types of sprockets

There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
sprocket

teeth

There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.

Hole

Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
sprocket

asphalt

Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.

China Pilot Bore DIN8187 Conveyor Chains 304 Stainless Steel Chain Wheel and Sprocket sprocket bike shopChina Pilot Bore DIN8187 Conveyor Chains 304 Stainless Steel Chain Wheel and Sprocket sprocket bike shop
editor by czh 2023-01-08

China Manufacture Chains Double Row Sprockets in Steel and Stainless Steel dirt bike sprocket

Solution Description

Manufacture chains double row sprockets in metal and stainless steel

Double row chain wheel of chain drive technique
When picking double row sprockets for chain drive techniques, numerous attributes need to be deemed. ANSI regular-measurement keyways, setscrews, and materials are just a handful of factors to think about. In addition, the toughness of sprockets shall be regarded as.
Durability
Double row sprockets are utilized for bicycles to lessen friction and wear triggered by chains. They can be created of stainless metal, iron or resin. They can also be personalized according to the pitch and quantity of enamel. They have long-expression longevity and robustness.
In common, the conveyor chain must operate in an setting that may possibly hurt chain put on. These environments need sturdy parts. Selecting the correct factors can increase chain daily life and lessen device downtime. In addition, they can increase productivity. These positive aspects make the assortment of tough double row sprockets quite crucial.
To ensure lengthy-time period durability, it is essential to read the sprocket rating very carefully. Normally, double sprockets are appropriate for large-speed operation, but in some cases, the lifestyle of double sprockets will be shortened. For illustration, if the chain is utilized to pull w80 objects, it may possibly not have adequate teeth to avert it from turning.
application
The invention offers a method for reducing sound by implementing a double sprocket. This method consists of changing the pin duration on adjacent strains. This way, the pin will get in touch with distinct teeth in the sprocket in different ways from the identical pin. In addition, the tooth profiles of the 2 chains can be modified to reduce sounds.
A Roller chain sprocket is the most frequent kind of sprocket. These chains are formed by pins or rollers that develop a hole among the sprocket tooth. This kind of sprocket is typically utilised in transmissions.
Software of Double row Chain Wheel
Double row sprockets are used in various apps that need continual wheel rotation. Sprockets are generally secured to the shaft with ANSI common-dimension keyways and setscrews. These sprockets are machined from bars or stamped from powder steel. Tooth hardness is an crucial issue in figuring out the existence of a sprocket. Hard tooth previous 3 instances as prolonged as soft ones. Some companies demand additional for hardened tooth.
Double row sprockets are typically employed in design sites and industrial applications the place higher-speed chain functionality is needed. This type of sprocket can be used in a variety of programs and is offered in numerous measurements. The dimensions of the steel sprockets range from 40 to 160.

Sprockets good quality testing:

We also provide different chains.

Business Information

 

 

 

Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Stainless Steel
Power Source: Electricity
Weight: 6kg
After-sales Service: Installation Guide 3-Year Warranty
Type: Agricultural
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Stainless Steel
Power Source: Electricity
Weight: 6kg
After-sales Service: Installation Guide 3-Year Warranty

How to choose a sprocket in CZPT

Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
sprocket

Pitch sprocket

When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.

three sprockets

Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
sprocket

Cone lock sprocket

Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.

Quick release sprocket

There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
sprocket

Irregular sprocket

Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
China Manufacture Chains Double Row Sprockets in Steel and Stainless Steel dirt bike sprocketChina Manufacture Chains Double Row Sprockets in Steel and Stainless Steel dirt bike sprocket
editor by czh 2023-01-06

China Automatic Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains Custom CNC Machining Steel Sprocket bike chain sprocket

Item Description

SPROCKET  5/8” X 3/8”  10B Sequence SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 sixteen.0mm
Radius Width C one.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B Sequence ROLLER CHAINS  
Pitch fifteen.875 mm
Internal Width nine.sixty five mm
Roller Diameter ten.16 mm

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 forty seven. forty one.48 10 ten 12
9 52.six forty six.forty two ten ten twelve
ten 57.5 51.37 ten ten twelve
11 63. 56.34 10 10 12
twelve 68. 61.34 10 10 12
thirteen 73. sixty six.32 ten ten twelve
fourteen seventy eight. 71.34 ten ten twelve
fifteen eighty three. 76.36 ten ten twelve
sixteen 88. 81.37 twelve 12 16
seventeen ninety three. 86.39 twelve twelve 16
18 98.3 ninety one.42 12 12 sixteen
19 103.3 96.45 12 12 16
20 108.4 101.49 twelve twelve 16
21 113.4 106.52 12 16 16
22 118. 111.fifty five twelve sixteen sixteen
23 123.5 116.58 12 16 16
24 128.three 121.sixty two 12 sixteen sixteen
25 134. 126.66 12 16 sixteen
26 139. 131.70 16 sixteen 20
27 one hundred forty four. 136.75 16 16 20
28 148.7 141.seventy eight sixteen sixteen twenty
29 153.eight 146.83 16 16 twenty
30 158.8 151.87 sixteen 16 twenty
31 163.9 156.ninety two sixteen twenty twenty
32 168.9 161.ninety five 16 20 20
33 174.5 167.00 16 20 twenty
34 179. 172.05 sixteen 20 20
35 184.one 177.ten 16 twenty 20
36 189.one 182.15 twenty 20 twenty five
37 194.two 187.20 twenty 20 twenty five
38 199.2 192.24 20 20 25
39 204.2 197.29 twenty 20 25
40 209.3 202.34 twenty 20 25
41 214.8 207.38 twenty twenty 25
forty two two,199 212.43 twenty twenty 25
forty three 224.nine 217.forty eight 20 20 twenty five
44 230. 222.53 twenty twenty twenty five
45 235. 227.58 20 twenty 25
46 240.one 232.63 20 25 25
forty seven 245.1 237.sixty eight twenty 25 twenty five
48 250.two 242.73 20 twenty five 25
49 255.2 247.78 20 twenty five 25
fifty 260.3 252.82 20 twenty five 25
51 265.3 257.87 twenty 25 twenty five
52 270.4 262.ninety two 20 25 25
53 275.4 267.ninety seven 20 25 twenty five
54 280.5 273.03 20 twenty five twenty five
55 285.5 278.08 20 25 twenty five
56 290.6 283.13 twenty five twenty five twenty five
57 296. 288.eighteen twenty five twenty five twenty five
fifty eight three hundred.7 293.23 twenty five twenty five 25
fifty nine 305.seven 298.28 twenty five twenty five twenty five
60 310.8 303.33 twenty five twenty five twenty five
sixty two 321.four 313.43 25 twenty five thirty
64 331.five 323.fifty three 25 twenty five thirty
65 336.5 328.58 twenty five 25 thirty
sixty six 341.6 333.sixty four 25 25 thirty
sixty eight 351.seven 343.74 25 25 thirty
70 361.eight 353.eighty four 25 25 30
seventy two 371.9 363.94 twenty five 25 thirty
seventy five 387.1 379.10 twenty five twenty five thirty
76 392.1 384.fifteen twenty five 25 30
78 402.two 394.twenty five 25 25 thirty
eighty 412.three 404.36 25 25 thirty
85 437.six 429.sixty two 25 30 30
90 462.eight 454.88 25 thirty thirty
95 488.five 480.fourteen twenty five thirty 30
one hundred 513.4 505.forty twenty five thirty thirty
110 563.nine 555.ninety two 25 30 thirty
114 584.one 576.13 twenty five 30 30
120 614.4 606.45 25 thirty 30
one hundred twenty five 639.seven 631.fifty one twenty five 30 30

Fundamental Info.
 

Product name  DIN ISO Regular Sprocket for Roller Chain
Materials Available  one. Stainless Steel: SS304, SS316, and so on
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, and so forth
three. OEM according to your request
Floor Therapy Heat therapy, Quenching treatment, Substantial frequency normalizing treatment method, Sprucing, Electrophoresis paint processing, Anodic oxidation therapy, and many others
Attribute Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so on
Design criterion ISO DIN ANSI & Client Drawings
Dimensions Consumer Drawings & ISO standard 
Software Industrial transmission products
Bundle Picket Scenario / Container and pallet, or created-to-buy
Certification ISO9001: 2008 
Gain Good quality 1st, Provider 1st, Competitive price tag, Rapidly shipping
Shipping and delivery Time 20 days for samples. 45 days for official order.

Installation AND Employing

The chain spoket, as a generate or deflection for chains, has pockets to hold the chain links with a D-profile cross segment with flat facet surfaces  parallel to the centre aircraft of the chain backlinks, and outer surfaces at correct angles to the chain link centre plane. The chain links are pressed firmly in opposition to the outer surfaces and every single of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the help surfaces of the wheel human body with each other with the end sides of the webs fashioned by the foremost and trailing partitions of the pocket.

Recognize

When fitting new chainwheels it is really critical that a new chain is equipped at the same time, and vice versa. Employing an previous chain with new sprockets, or a new chain with outdated sprockets will trigger quick put on.

It is essential if you are setting up the chainwheels oneself to have the factory service manual specific to your model. Our chainwheels are created to be a direct replacement for your OEM chainwheels and as this kind of, the set up should be carried out in accordance to your designs service guide.

In the course of use a chain will stretch (i.e. the pins will use triggering extension of the chain). Making use of a chain which has been stretched more than the earlier mentioned optimum allowance brings about the chain to experience up the teeth of the sprocket. This leads to hurt to the guidelines of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely by way of the best of the tooth, instead than the whole tooth. This results in significant wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Requirements corporations (this kind of as ANSI and ISO) keep expectations for layout, dimensions, and interchangeability of transmission chains. For illustration, the subsequent Table displays info from ANSI common B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Culture of Mechanical Engineers (ASME). See the references[8][9][10] for additional data.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Dimensions
Size Pitch Highest Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 .250 in (6.35 mm) .a hundred thirty in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 .375 in (9.fifty three mm) .two hundred in (5.08 mm) one,760 lb (800 kg) eighteen lb (8.2 kg)
forty one .five hundred in (twelve.70 mm) .306 in (7.seventy seven mm) one,500 lb (680 kg) eighteen lb (8.2 kg)
forty .five hundred in (twelve.70 mm) .312 in (7.ninety two mm) three,a hundred twenty five lb (1,417 kg) 31 lb (fourteen kg)
fifty .625 in (fifteen.88 mm) .400 in (10.sixteen mm) four,880 lb (2,210 kg) forty nine lb (22 kg)
60 .750 in (19.05 mm) .469 in (eleven.ninety one mm) seven,030 lb (3,a hundred ninety kg) 70 lb (32 kg)
eighty 1.000 in (25.40 mm) .625 in (15.88 mm) twelve,500 lb (5,seven-hundred kg) 125 lb (57 kg)
a hundred one.250 in (31.seventy five mm) .750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.ten mm) .875 in (22.23 mm) 28,a hundred twenty five lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (forty four.forty five mm) 1.000 in (25.forty mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
one hundred sixty two.000 in (fifty.80 mm) 1.one hundred twenty five in (28.fifty eight mm) fifty,000 lb (23,000 kg) 500 lb (230 kg)
a hundred and eighty two.250 in (57.15 mm) 1.460 in (37.08 mm) sixty three,280 lb (28,seven hundred kg) 633 lb (287 kg)
200 two.500 in (sixty three.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (seventy six.twenty mm) one.875 in (forty seven.63 mm) 112,500 lb (51,000 kg) one,000 lb (450 kg

For mnemonic reasons, below is another presentation of important proportions from the exact same common, expressed in fractions of an inch (which was component of the pondering guiding the decision of chosen numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths		 ANSI normal
chain quantity		 Width (inches)
one⁄4 2⁄8 25 1⁄8
three⁄8 3⁄8 three5 three⁄16
1⁄2 4⁄eight four1 1⁄four
1⁄two four⁄eight four 5⁄16
5⁄eight five⁄eight five 3⁄8
three⁄four 6⁄8 6 1⁄2
one eight⁄eight 8 5⁄8

Notes:
one. The pitch is the length between roller centers. The width is the distance in between the hyperlink plates (i.e. a bit much more than the roller width to let for clearance).
two. The appropriate-hand digit of the common denotes 0 = regular chain, 1 = light-weight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the number of eighths of an inch that make up the pitch.
four. An “H” subsequent the regular amount denotes heavyweight chain. A hyphenated quantity following the standard number denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes number sixty heavyweight triple-strand chain.
 A standard bicycle chain (for derailleur gears) utilizes slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load potential. The far more sprockets at the rear wheel (historically 3-6, presently 7-12 sprockets), the narrower the chain. Chains are offered according to the quantity of speeds they are created to work with, for instance, “10 pace chain”. Hub gear or solitary speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the optimum thickness of a sprocket that can be utilised with the chain.

Usually chains with parallel shaped back links have an even quantity of hyperlinks, with each slim hyperlink followed by a broad a single. Chains created up with a uniform kind of hyperlink, narrow at 1 and wide at the other finish, can be created with an odd number of backlinks, which can be an gain to adapt to a special chainwheel-distance on the other aspect this kind of a chain tends to be not so powerful.

Roller chains manufactured using ISO standard are at times named as isochains.

 

WHY Choose US 

1. Trustworthy Top quality Assurance Program
two. Chopping-Edge Computer-Controlled CNC Devices
3. Bespoke Options from Highly Seasoned Specialists
four. Customization and OEM Accessible for Certain Application
five. In depth Inventory of Spare Parts and Accessories
6. Effectively-Created Throughout the world Marketing and advertising Community
seven. Successful Following-Sale Support System

 

The 219 sets of superior automatic production gear supply guarantees for high item high quality. The 167 engineers and specialists with senior specialist titles can style and build items to meet the precise demands of customers, and OEM customizations are also offered with us. Our audio worldwide service network can give buyers with well timed after-income specialized companies.

We are not just a producer and supplier, but also an business advisor. We perform pro-actively with you to offer professional tips and solution recommendations in buy to finish up with a most value successful solution obtainable for your certain application. The consumers we provide around the world variety from stop consumers to distributors and OEMs. Our OEM replacements can be substituted wherever needed and appropriate for both repair and new assemblies.

 

 

US $1.1
/ Piece
| 		1,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: Q235, Brass, Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 47.0 41.48 10 10 12
9 52.6 46.42 10 10 12
10 57.5 51.37 10 10 12
11 63.0 56.34 10 10 12
12 68.0 61.34 10 10 12
13 73.0 66.32 10 10 12
14 78.0 71.34 10 10 12
15 83.0 76.36 10 10 12
16 88.0 81.37 12 12 16
17 93.0 86.39 12 12 16
18 98.3 91.42 12 12 16
19 103.3 96.45 12 12 16
20 108.4 101.49 12 12 16
21 113.4 106.52 12 16 16
22 118.0 111.55 12 16 16
23 123.5 116.58 12 16 16
24 128.3 121.62 12 16 16
25 134.0 126.66 12 16 16
26 139.0 131.70 16 16 20
27 144.0 136.75 16 16 20
28 148.7 141.78 16 16 20
29 153.8 146.83 16 16 20
30 158.8 151.87 16 16 20
31 163.9 156.92 16 20 20
32 168.9 161.95 16 20 20
33 174.5 167.00 16 20 20
34 179.0 172.05 16 20 20
35 184.1 177.10 16 20 20
36 189.1 182.15 20 20 25
37 194.2 187.20 20 20 25
38 199.2 192.24 20 20 25
39 204.2 197.29 20 20 25
40 209.3 202.34 20 20 25
41 214.8 207.38 20 20 25
42 2,199 212.43 20 20 25
43 224.9 217.48 20 20 25
44 230.0 222.53 20 20 25
45 235.0 227.58 20 20 25
46 240.1 232.63 20 25 25
47 245.1 237.68 20 25 25
48 250.2 242.73 20 25 25
49 255.2 247.78 20 25 25
50 260.3 252.82 20 25 25
51 265.3 257.87 20 25 25
52 270.4 262.92 20 25 25
53 275.4 267.97 20 25 25
54 280.5 273.03 20 25 25
55 285.5 278.08 20 25 25
56 290.6 283.13 25 25 25
57 296.0 288.18 25 25 25
58 300.7 293.23 25 25 25
59 305.7 298.28 25 25 25
60 310.8 303.33 25 25 25
62 321.4 313.43 25 25 30
64 331.5 323.53 25 25 30
65 336.5 328.58 25 25 30
66 341.6 333.64 25 25 30
68 351.7 343.74 25 25 30
70 361.8 353.84 25 25 30
72 371.9 363.94 25 25 30
75 387.1 379.10 25 25 30
76 392.1 384.15 25 25 30
78 402.2 394.25 25 25 30
80 412.3 404.36 25 25 30
85 437.6 429.62 25 30 30
90 462.8 454.88 25 30 30
95 488.5 480.14 25 30 30
100 513.4 505.40 25 30 30
110 563.9 555.92 25 30 30
114 584.1 576.13 25 30 30
120 614.4 606.45 25 30 30
125 639.7 631.51 25 30 30

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8
US $1.1
/ Piece
| 		1,000 Pieces

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Rolling Gear, Cut Gear
Toothed Portion Shape: Spur Gear
Material: Q235, Brass, Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 47.0 41.48 10 10 12
9 52.6 46.42 10 10 12
10 57.5 51.37 10 10 12
11 63.0 56.34 10 10 12
12 68.0 61.34 10 10 12
13 73.0 66.32 10 10 12
14 78.0 71.34 10 10 12
15 83.0 76.36 10 10 12
16 88.0 81.37 12 12 16
17 93.0 86.39 12 12 16
18 98.3 91.42 12 12 16
19 103.3 96.45 12 12 16
20 108.4 101.49 12 12 16
21 113.4 106.52 12 16 16
22 118.0 111.55 12 16 16
23 123.5 116.58 12 16 16
24 128.3 121.62 12 16 16
25 134.0 126.66 12 16 16
26 139.0 131.70 16 16 20
27 144.0 136.75 16 16 20
28 148.7 141.78 16 16 20
29 153.8 146.83 16 16 20
30 158.8 151.87 16 16 20
31 163.9 156.92 16 20 20
32 168.9 161.95 16 20 20
33 174.5 167.00 16 20 20
34 179.0 172.05 16 20 20
35 184.1 177.10 16 20 20
36 189.1 182.15 20 20 25
37 194.2 187.20 20 20 25
38 199.2 192.24 20 20 25
39 204.2 197.29 20 20 25
40 209.3 202.34 20 20 25
41 214.8 207.38 20 20 25
42 2,199 212.43 20 20 25
43 224.9 217.48 20 20 25
44 230.0 222.53 20 20 25
45 235.0 227.58 20 20 25
46 240.1 232.63 20 25 25
47 245.1 237.68 20 25 25
48 250.2 242.73 20 25 25
49 255.2 247.78 20 25 25
50 260.3 252.82 20 25 25
51 265.3 257.87 20 25 25
52 270.4 262.92 20 25 25
53 275.4 267.97 20 25 25
54 280.5 273.03 20 25 25
55 285.5 278.08 20 25 25
56 290.6 283.13 25 25 25
57 296.0 288.18 25 25 25
58 300.7 293.23 25 25 25
59 305.7 298.28 25 25 25
60 310.8 303.33 25 25 25
62 321.4 313.43 25 25 30
64 331.5 323.53 25 25 30
65 336.5 328.58 25 25 30
66 341.6 333.64 25 25 30
68 351.7 343.74 25 25 30
70 361.8 353.84 25 25 30
72 371.9 363.94 25 25 30
75 387.1 379.10 25 25 30
76 392.1 384.15 25 25 30
78 402.2 394.25 25 25 30
80 412.3 404.36 25 25 30
85 437.6 429.62 25 30 30
90 462.8 454.88 25 30 30
95 488.5 480.14 25 30 30
100 513.4 505.40 25 30 30
110 563.9 555.92 25 30 30
114 584.1 576.13 25 30 30
120 614.4 606.45 25 30 30
125 639.7 631.51 25 30 30

###

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths		 ANSI standard
chain number		 Width (inches)
1⁄4 2⁄8 25 1⁄8
3⁄8 3⁄8 35 3⁄16
1⁄2 4⁄8 41 1⁄4
1⁄2 4⁄8 40 5⁄16
5⁄8 5⁄8 50 3⁄8
3⁄4 6⁄8 60 1⁄2
1 8⁄8 80 5⁄8

What you need to know about sprockets

If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
sprocket

Various types of sprockets

There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
sprocket

teeth

There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.

Hole

Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
sprocket

asphalt

Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.

China Automatic Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains Custom CNC Machining Steel Sprocket bike chain sprocketChina Automatic Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains Custom CNC Machining Steel Sprocket bike chain sprocket
editor by czh 2023-01-05