Product Description
1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.
Product Paramenters
| DRIVEN GEAR |
NUMBER OF TEETH |
8 |
|
MODULE |
7.8205 | |
|
LENTH |
244 | |
|
OUTER DIAMETER |
ø94.44 |
|
|
DIRECTION OF SPIRAL |
L |
|
|
ACCURACY OF SPLINE |
M24*1.5-6g | |
|
NUMBER OF SPLINE |
10 |
|
DRIVEN GEAR |
NUMBER OF TEETH |
39 |
|
OUTER DIAMETER |
ø305 |
|
|
DIAMETER OF INNER HOLE |
ø165 |
|
|
ACCURACY OF SCREW |
12-ø12.5 | |
|
CENTER DISTANCE OF SCREW HOLE |
ø190 |
|
|
DIRECTION OF SPIRAL |
R |
Company Profiles
Our company,HangZhou CZPT Gear co.,Ltd , specialized in Hypoid and spiral bevel gear used in Automotive industry, was foundeded in 1996, with registered capital 136,8 square meter, with building area of 72,000 square meters. More than 500 employees work in our company.
We own more than 560 high-precise machining equipments, 10 Klingelnberg Oerlikon gear production lines, 36 Gleason gear production lines, 5 forging production lines 2 german Aichilin and 5 CZPT CZPT advanced automatic continuous heat treatment production lines. With the introducing the advanced Oerlikon C50 and P65 measuring center, we enhence our technology level and improve our product quality a lot. We offer better quality and good after-sale service with low price, which insure the good reputation. With the concept of “for the people, by technology, creativity, for the society, transfering friendship, honest”, we are trying to provice the world-top level product.
Our aim is: CZPT Gear,world class, Drive the world.
According to the different strength and performance, we choose the steel with strong compression;Using Germany professional software and our professional engineers to design products with more reasonable size and better performance;We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;Quality assurance in every step to ensure product quality is controllable.
Our company had full quality management system and had been certified by ISO9001:2000, QS-9000:1998, ISO/TS16949 , which insure the entrance of international market.
Certification & honors
Packaging & Shipping
Packaging Detail:standard package(carton ,wooden pallet).
Shipping:Support Sea freight. Accept FOB,EXW,FAS,DES.
Cooperative customers
HangZhou CZPT Gear Co., Ltd. adheres to the concept of “people-oriented, prosper with science and technology; create high-quality products, contribute to the society; turn friendship, and contribute sincerely”, and will strive to create world automotive axle spiral bevel gear products.
1.Do you provide samples?
Yes,we can offer free sample but not pay the cost of freight.
2.What about OEM?
Yes,we can do OEM according to your requirements.
3.How about after-sales service?
We have excellent after-sales service if you have any quanlity problem,you can contact us anytime.
4.What about package?
Stardard package or customized package as requirements.
5.How to ensure the quanlity of the products?
We can provide raw meterial report,metallographic examination and the accuracy testing etc.
6.How long is your delivery time?
Genarally it is 4-7 days.If customized it will be take 20 days according to your quantity. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Herringbone Gear |
| Material: | Cast Steel |
| Samples: |
US$ 35/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be used in automotive applications?
Yes, sprocket gears can be used in automotive applications, particularly in vehicles that utilize chain and sprocket systems for power transmission. Sprocket gears are commonly found in motorcycles, bicycles, and some specialized automotive vehicles.
In motorcycles, sprocket gears are a crucial component of the chain drive system that transfers power from the engine to the rear wheel. The front and rear sprockets, connected by a roller chain, work together to create a gear ratio that affects the vehicle’s speed and torque characteristics.
Bicycles also use sprocket gears as part of their chain drive system. The front chainring and rear sprocket (cassette) combination allows cyclists to shift gears and adapt to different terrains or riding conditions.
While sprocket gears are not as prevalent in traditional passenger cars as they are in motorcycles and bicycles, there are specialized automotive applications where they can be found. For example, some off-road vehicles, agricultural equipment, and certain transmission systems in high-performance sports cars may use sprocket gears.
One of the advantages of using sprocket gears in automotive applications is their efficiency in power transmission. They can handle high torque loads and are well-suited for applications that require a simple and robust mechanical design. Additionally, sprocket gear systems are generally low-maintenance, making them suitable for rugged environments and off-road use.
However, sprocket gear systems also have some limitations. They may produce more noise compared to other transmission methods, such as gears with teeth. Additionally, the exposed chain and sprocket system requires regular lubrication and maintenance to ensure proper functioning and longevity.
In summary, while sprocket gears are not as commonly used in traditional passenger cars, they play a significant role in various automotive applications, particularly in motorcycles, bicycles, off-road vehicles, and specialized high-performance vehicles.
What are the best practices for cleaning and maintaining sprocket gears?
Proper cleaning and maintenance are essential for ensuring the longevity and efficient performance of sprocket gears. Here are the best practices for cleaning and maintaining sprocket gears:
1. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear’s lifespan.
2. Cleaning: Clean the sprocket gears regularly to remove dirt, debris, and contaminants that can accelerate wear. Use a soft brush or cloth to clean the sprocket teeth and the surrounding areas.
3. Avoid Harsh Chemicals: When cleaning sprocket gears, avoid using harsh chemicals or solvents that can damage the surface finish or compromise the material’s integrity. Stick to recommended cleaning agents by the manufacturer.
4. Lubrication: Proper lubrication is crucial to reducing friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer’s recommendations for lubrication intervals.
5. Correct Tension: Maintain the correct chain tension to prevent excessive wear on both the sprocket and the chain. Ensure the chain is not too loose or too tight, as both conditions can cause premature wear.
6. Alignment: Check and maintain proper alignment between the sprocket gear and the chain. Misalignment can cause uneven wear and premature failure.
7. Material Selection: Choose sprocket gears made from high-quality and durable materials that are suitable for the specific operating conditions of the application.
8. Overload Prevention: Operate sprocket gears within their recommended load-carrying capacity to prevent premature wear and failure.
9. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material’s properties and lead to accelerated wear.
10. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
By following these best practices for cleaning and maintaining sprocket gears, you can maximize their lifespan, reduce downtime, and optimize the performance of mechanical systems that utilize them.
How do I calculate the gear ratio for a sprocket gear system?
Calculating the gear ratio for a sprocket gear system is essential for understanding how the rotational speed and torque are transmitted between the driving and driven sprockets. The gear ratio (GR) is a measure of the speed and torque multiplication or reduction between the two sprockets.
The gear ratio is determined by the ratio of the number of teeth on the driving sprocket (ND) to the number of teeth on the driven sprocket (NDR). The formula to calculate the gear ratio is as follows:
Gear Ratio (GR) = ND / NDR
Where:
- ND is the number of teeth on the driving sprocket.
- NDR is the number of teeth on the driven sprocket.
For example, if the driving sprocket has 20 teeth, and the driven sprocket has 40 teeth, the gear ratio would be:
GR = 20 / 40 = 0.5
In this example, the gear ratio is 0.5, which means the driven sprocket rotates at half the speed of the driving sprocket, but with twice the torque. This is a speed reduction gear ratio.
Conversely, if the driven sprocket had 20 teeth and the driving sprocket had 40 teeth, the gear ratio would be:
GR = 40 / 20 = 2
In this case, the gear ratio is 2, indicating a speed increase gear ratio. The driven sprocket would rotate twice as fast as the driving sprocket, but with half the torque.
Calculating the gear ratio is crucial for selecting the appropriate sprockets for a desired application. Gear ratios affect the output speed, torque, and overall performance of the mechanical system, so choosing the right gear ratio is essential for achieving the desired results.
editor by Dream 2024-05-15
China OEM Factory Wholesale Industrial Trucks with Sprocket and Transmission Gear
Product Description
1) According to the different strength and performance, we choose the steel with strong compression;
2) Using Germany professional software and our professional engineers to design products with more reasonable size and better performance; 3) We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;
4) Quality assurance in every step to ensure product quality is controllable.
Product Paramenters
| DRIVEN GEAR |
NUMBER OF TEETH |
8 |
|
MODULE |
7.8205 | |
|
LENTH |
244 | |
|
OUTER DIAMETER |
ø94.44 |
|
|
DIRECTION OF SPIRAL |
L |
|
|
ACCURACY OF SPLINE |
M24*1.5-6g | |
|
NUMBER OF SPLINE |
10 |
|
DRIVEN GEAR |
NUMBER OF TEETH |
39 |
|
OUTER DIAMETER |
ø305 |
|
|
DIAMETER OF INNER HOLE |
ø165 |
|
|
ACCURACY OF SCREW |
12-ø12.5 | |
|
CENTER DISTANCE OF SCREW HOLE |
ø190 |
|
|
DIRECTION OF SPIRAL |
R |
Company Profiles
Our company,HangZhou CZPT Gear co.,Ltd , specialized in Hypoid and spiral bevel gear used in Automotive industry, was foundeded in 1996, with registered capital 136,8 square meter, with building area of 72,000 square meters. More than 500 employees work in our company.
We own more than 560 high-precise machining equipments, 10 Klingelnberg Oerlikon gear production lines, 36 Gleason gear production lines, 5 forging production lines 2 german Aichilin and 5 CZPT CZPT advanced automatic continuous heat treatment production lines. With the introducing the advanced Oerlikon C50 and P65 measuring center, we enhence our technology level and improve our product quality a lot. We offer better quality and good after-sale service with low price, which insure the good reputation. With the concept of “for the people, by technology, creativity, for the society, transfering friendship, honest”, we are trying to provice the world-top level product.
Our aim is: CZPT Gear,world class, Drive the world.
According to the different strength and performance, we choose the steel with strong compression;Using Germany professional software and our professional engineers to design products with more reasonable size and better performance;We can customize our products according to the needs of our customers,Therefore, the optimal performance of the gear can be exerted under different working conditions;Quality assurance in every step to ensure product quality is controllable.
Our company had full quality management system and had been certified by ISO9001:2000, QS-9000:1998, ISO/TS16949 , which insure the entrance of international market.
Certification & honors
Packaging & Shipping
Packaging Detail:standard package(carton ,wooden pallet).
Shipping:Support Sea freight. Accept FOB,EXW,FAS,DES.
Cooperative customers
HangZhou CZPT Gear Co., Ltd. adheres to the concept of “people-oriented, prosper with science and technology; create high-quality products, contribute to the society; turn friendship, and contribute sincerely”, and will strive to create world automotive axle spiral bevel gear products.
1.Do you provide samples?
Yes,we can offer free sample but not pay the cost of freight.
2.What about OEM?
Yes,we can do OEM according to your requirements.
3.How about after-sales service?
We have excellent after-sales service if you have any quanlity problem,you can contact us anytime.
4.What about package?
Stardard package or customized package as requirements.
5.How to ensure the quanlity of the products?
We can provide raw meterial report,metallographic examination and the accuracy testing etc.
6.How long is your delivery time?
Genarally it is 4-7 days.If customized it will be take 20 days according to your quantity. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Herringbone Gear |
| Material: | Cast Steel |
| Samples: |
US$ 35/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be used for heavy-duty applications in industrial machinery?
Yes, sprocket gears are commonly used in heavy-duty applications in various industrial machinery. Their robust design, high load-carrying capacity, and reliable power transmission make them well-suited for demanding industrial environments. Some of the key reasons sprocket gears are preferred for heavy-duty applications include:
1. Strength and Durability: Sprocket gears are typically made from strong and durable materials, such as hardened steel or cast iron. This allows them to withstand heavy loads and high torques without deformation or failure.
2. High Load Capacity: The tooth profile of sprocket gears, especially those with involute teeth, distributes the load evenly across the gear teeth, enabling them to handle substantial forces and transmit power efficiently.
3. Versatility: Sprocket gears can be designed in various configurations, such as single, double, or triple-strand setups, to accommodate different load requirements. They can also be used in combination with multiple sprockets and chains to create complex power transmission systems.
4. Effective Power Transmission: Sprocket gears provide reliable power transmission with minimal slippage or backlash. This is crucial in heavy-duty machinery, where precision and consistency are essential for optimal performance.
5. Easy Maintenance: Sprocket gears are relatively easy to maintain, as they can be individually replaced if worn or damaged. This reduces downtime and maintenance costs in industrial settings.
6. Adaptability: Sprocket gears can be used with various types of chains, such as roller chains, silent chains, or specialty chains, allowing for adaptation to different industrial applications.
7. Cost-Effective Solution: Considering their durability and long lifespan, sprocket gears offer a cost-effective solution for heavy-duty applications in industrial machinery.
Common examples of heavy-duty industrial machinery that use sprocket gears include conveyor systems, agricultural equipment, mining machinery, construction machinery, and manufacturing equipment.
It is important to select the appropriate sprocket gear size, material, and tooth configuration based on the specific requirements of the machinery and the operating conditions to ensure reliable and efficient performance in heavy-duty industrial applications.
Can sprocket gears be used in underwater applications?
Yes, sprocket gears can be used in underwater applications with certain considerations. While sprocket gears are commonly used in various mechanical systems on land, their application underwater introduces additional challenges due to the aquatic environment’s unique conditions. Here are some key factors to consider when using sprocket gears in underwater applications:
1. Corrosion Resistance: Exposure to water can lead to corrosion of the sprocket gear and other components. Therefore, it’s crucial to use materials that offer excellent corrosion resistance. Stainless steel, brass, bronze, or other non-corrosive alloys are commonly used choices.
2. Waterproof Sealing: Ensure that the mechanical assembly is effectively sealed to prevent water ingress. Proper seals, gaskets, and O-rings should be used to keep water away from the critical components, reducing the risk of damage and maintaining the gear’s performance.
3. Lubrication: Underwater applications require special consideration for lubrication. Standard lubricants may wash away or degrade underwater, leading to increased friction and wear. Specialized waterproof or marine-grade lubricants are necessary to maintain smooth operation and prevent corrosion.
4. Material Selection: Choose materials not only for corrosion resistance but also for their ability to withstand the hydrostatic pressure at the specific underwater depth where the sprocket gear will be used.
5. Environmental Factors: Consider other environmental factors, such as temperature variations, salinity, and presence of debris or marine life, which may affect the sprocket gear’s performance and longevity.
6. Load and Speed: Understand the specific load and speed requirements of the underwater application to ensure the sprocket gear can handle the conditions effectively.
7. Regular Inspection: Implement a proactive maintenance program with regular inspections to identify any signs of wear, corrosion, or damage. Promptly address any issues to prevent equipment failure.
By carefully considering these factors and selecting appropriate materials and designs, sprocket gears can be successfully used in underwater applications. Whether in marine equipment, underwater robotics, or other submersible systems, proper engineering and maintenance are essential for reliable and efficient operation.
How do you select the right size and pitch of a sprocket gear for a specific application?
Choosing the correct size and pitch of a sprocket gear is crucial to ensure optimal performance and efficiency in a specific application. Here’s a step-by-step guide to help you make the right selection:
- Identify the Application Requirements: Understand the specific requirements of your application, including the desired speed, torque, power transmission, and operating conditions.
- Calculate the Gear Ratio: Determine the gear ratio required for your application. The gear ratio is the ratio of the number of teeth between the driving and driven sprockets and determines the speed and torque relationship between them.
- Consider the Pitch: The pitch of a sprocket refers to the distance between the centers of adjacent teeth. It is essential to choose sprockets with the same pitch as the chain or belt you plan to use in your transmission system.
- Choose the Number of Teeth: Once you have the gear ratio and pitch, calculate the number of teeth for both the driving and driven sprockets. The number of teeth affects the speed and torque characteristics of the transmission system.
- Verify Shaft Compatibility: Ensure that the sprocket gear’s bore size matches the diameter of your application’s input and output shafts.
- Consider Material and Strength: Select sprocket gears made from materials suitable for your application’s operating conditions. For heavy-duty applications, choose sprockets with high strength and wear resistance.
- Check Center Distance: Verify the center distance between the driving and driven sprockets to ensure proper chain or belt tension and alignment.
- Review Manufacturer Recommendations: Manufacturers often provide guidelines and specifications for their sprocket gears. Review their recommendations and consult with experts if necessary.
- Perform Regular Maintenance: Once the sprocket gear is installed, conduct regular maintenance, including lubrication and inspection, to ensure longevity and optimal performance.
Choosing the right size and pitch of a sprocket gear requires careful consideration of various factors to meet the specific needs of your application. By following these steps and consulting with experts when needed, you can select the most suitable sprocket gear for your mechanical system.
editor by Dream 2024-05-03
China manufacturer Industrial Sprocket Transmission Precision Parts Automotive Gears for Transmission Planetary/Transmission/Starter Gear/Spur Gear
Product Description
Company Profile
HangZhou Xihu (West Lake) Dis. Mechanical Transmission Parts Co., Ltd. is a professional manufacturer of mechanical transmission parts, founded in 1987. Our company is committed to standard roller sprocket, single row and multi-row sprocket, non-standard sprocket, gear, rack, bevel gear, sprocket, shaft, gear shaft and other products. We have passed ISO 9001 .Xihu (West Lake) Dis. company has a number of experienced engineers, involved in plHangZhou, testing, heat treatment, inspection, the use of strict and accurate testing methods. Our sprockets are widely used in agricultural machinery, stereoscopic garage, mining equipment, woodworking machinery, petroleum machinery and other industries. Implementation standards such as ANSI.BS, DIN.KANA, etc., can also be customized according to the drawing processing
Our products have won wide praise and trust from customers for their excellent quality. HangZhou Xihu (West Lake) Dis. mechanical transmission Parts Co., Ltd. adhere to the quality of survival, innovation and development, customer first business philosophy, dedicated to domestic and foreign customers service. We warmly welcome you to negotiate business with us.
Product Description
| Standard or Nonstandard | Standard | Application | Maqchinery | |
| Hardness | Hardened Tooth Surface | Material | C45 | |
| Specification | Various Sprockets | Pitch(PCD) | 1-10M | |
| Toothed Portion Shape | Spur Gear | Teeth | 10-60Z | |
| HS Code | 84839000 | Production Capacity | 100000 Pcs/Year |
Detailed Photos
Certifications
FAQ
1. Are you manufacturer or trade company ?
We are a manufacturing factory founded in 1987 ,with trade team for international service.
2. What terms of payment you usually use ?
T/T . 30% deposit ,and 70% before finish production .Price :FOB ZheJiang .
3. Can you make products according to customer”s design ?
Yes , we can make according to customer”s drawing and samples .OED and ODM are acceptable.
4.How long is your delivery time ?
Genarally it is 5-15 days afte rthe deposit .It will take more days customized.
5. What do I need for offering a quote ?
Please offer us 2D or 3d drawing (with material ,dimension,surface treatment and other technical datas etc.), quantity ,or samples .
Then we will quote the best price .
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | Order Sample free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I extend the lifespan of sprocket gears?
Extending the lifespan of sprocket gears is crucial to ensure the long-term efficiency and reliability of mechanical systems where they are employed. Proper maintenance and care can significantly contribute to prolonging the lifespan of sprocket gears:
1. Lubrication: Regular and proper lubrication is essential to reduce friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer’s recommendations for lubrication intervals.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive wear on both the sprocket and the chain. Too much tension can cause premature wear, while too little tension can result in chain slippage and increased wear on the sprocket teeth.
3. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear’s lifespan.
4. Cleaning: Keep the sprocket gears clean and free from debris and contaminants that can accelerate wear. Regularly clean the sprocket and chain using appropriate cleaning agents and methods.
5. Proper Alignment: Ensure proper alignment between the sprocket gear and the chain to distribute the load evenly across the teeth. Misalignment can cause uneven wear and premature failure.
6. Material Selection: Choose high-quality sprocket gears made from durable and wear-resistant materials that are suitable for the application’s specific operating conditions.
7. Avoid Overloading: Operating sprocket gears within their recommended load-carrying capacity helps prevent premature wear and failure.
8. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material’s properties and lead to accelerated wear.
9. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
10. Proper Storage: Store spare sprocket gears in a clean, dry, and controlled environment to prevent corrosion or damage before installation.
By following these practices and paying attention to the sprocket gear’s condition, you can extend its lifespan and optimize the performance of mechanical systems that rely on them.
What are the different types of sprocket gears and their applications?
Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:
- 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
- 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
- 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
- 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
- 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
- 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
- 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.
The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.
editor by CX 2024-04-12
China Good quality Industrial Sprocket Transmission Precision Parts Automotive Gears for Transmission Planetary/Transmission/Starter Gear/Spur Gear
Product Description
Customer High Precision Manufacturer Steel /Pinion/Straight/Helical Spur
Planetary/Transmission/Starter/ CNC machining/Drive Gear
Our advantage:
*Specialization in CNC formulations of high precision and quality
*Independent quality control department
*Control plan and process flow sheet for each batch
*Quality control in all whole production
*Meeting demands even for very small quantities or single units
*Short delivery times
*Online orders and production progress monitoring
*Excellent price-quality ratio
*Absolute confidentiality
*Various materials (stainless steel, iron, brass, aluminum, titanium, special steels, industrial plastics)
*Manufacturing of complex components of 1 – 1000mm.
Production machine:
| Specification | Material | Hardness |
| Z13 | Steel | HRC35-40 |
| Z16 | Steel | HRC35-40 |
| Z18 | Steel | HRC35-40 |
| Z20 | Steel | HRC35-40 |
| Z26 | Steel | HRC35-40 |
| Z28 | Steel | HRC35-40 |
| Custom dimensions according to drawings | Steel | HRC35-40 |
Production machine:
Inspection equipment :
Gear tester
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | Internal Gear |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Steel |
| Customization: |
Available
| Customized Request |
|---|
How do I calculate the required torque for a sprocket gear setup?
Calculating the required torque for a sprocket gear setup involves considering several factors that influence the torque demand in the system. Here’s a step-by-step guide on how to calculate the required torque:
Step 1: Determine the Load: Identify the load or resistance that the sprocket gear setup needs to overcome. This could be the weight of the object being lifted, the force required to move a conveyor belt, or any other application-specific load.
Step 2: Calculate the Torque to Overcome Friction: The sprocket gear system experiences friction losses that must be accounted for in the torque calculation. Frictional torque can be estimated based on the type of bearings used, lubrication, and other factors.
Step 3: Account for Efficiency: No mechanical system is 100% efficient, and some power will be lost due to factors like friction and heat. Take the system’s efficiency into account when calculating the required torque.
Step 4: Determine Speed and Angular Velocity: The speed at which the sprocket gear system operates and the angular velocity of the driven sprocket are essential for torque calculation.
Step 5: Use the Torque Calculation Formula: The torque (T) required to drive the sprocket gear system can be calculated using the formula:
T = (Load × Distance) ÷ (2π × Speed)
Where:
Load = Load or resistance on the system (in Newtons, N)
Distance = Radius or effective radius of the driven sprocket (in meters, m)
Speed = Angular speed of the driven sprocket (in radians per second, rad/s)
Step 6: Apply Safety Factor: In real-world applications, it’s essential to apply a safety factor to the calculated torque to account for unexpected overloads or variations in the system’s performance.
Step 7: Select the Motor or Power Source: Once you have the calculated required torque, choose a motor or power source that can deliver the necessary torque while considering factors like the motor’s torque-speed curve and duty cycle.
Keep in mind that sprocket gear systems might have multiple stages with different gear ratios, so the torque calculation might vary for each stage. Additionally, consult with a mechanical engineer or specialist for critical applications or complex setups to ensure accurate torque calculations.
What are the load-carrying capacities of different sprocket gear configurations?
Load-carrying capacity is a critical factor to consider when selecting a sprocket gear configuration for a specific application. The load-carrying capacity of a sprocket gear depends on various factors, including the material and design of the sprocket, the size and number of teeth, and the type of chain used in conjunction with the sprocket.
Here are some factors that influence the load-carrying capacities of different sprocket gear configurations:
1. Material: The choice of material significantly impacts the load-carrying capacity of the sprocket gear. High-strength materials, such as hardened steel or alloy materials, are often used for heavy-duty applications, as they can withstand higher loads without deformation or failure.
2. Number of Teeth: Sprocket gears with more teeth typically distribute the load over a larger surface area, which can improve their load-carrying capacity. However, an increase in the number of teeth may also lead to higher friction losses in the system.
3. Tooth Profile: The shape of the sprocket gear teeth, such as standard or modified tooth profiles, can affect the load distribution and efficiency of the gear system.
4. Chain Type: The type of chain used with the sprocket gear is crucial in determining the overall load-carrying capacity of the system. Different chain designs, such as roller chains or silent chains, have varying load-carrying capabilities.
It is essential to consult the manufacturer’s specifications and engineering data when determining the load-carrying capacity of a particular sprocket gear configuration. Additionally, factors like the speed of operation, environmental conditions, and duty cycle should also be considered to ensure the sprocket gear is appropriately sized for the application.
In heavy-duty and high-load applications, engineers often conduct detailed calculations and simulations to ensure the sprocket gear system can handle the required loads safely and reliably. Proper maintenance and periodic inspections are essential to preserve the load-carrying capacity and extend the life of the sprocket gear system.
What are the different types of sprocket gears and their applications?
Sprocket gears come in various types, each designed for specific applications based on their unique characteristics. Here are some of the different types of sprocket gears and their applications:
- 1. Plain Sprocket: Plain sprockets are the most basic type, consisting of a wheel with evenly spaced teeth. They are commonly used in simple power transmission systems and light-duty applications where precise timing is not critical.
- 2. Idler Sprocket: Idler sprockets are used to guide and tension the chain in a sprocket system. They do not connect directly to a power source but play a crucial role in maintaining proper chain tension and alignment.
- 3. Roller Chain Sprocket: Roller chain sprockets are designed to work with roller chains, which have rollers that engage with the sprocket teeth. They are widely used in applications like bicycles, motorcycles, industrial machinery, and conveyor systems.
- 4. Silent Chain Sprocket: Silent chain sprockets, also known as inverted-tooth chain sprockets, are used with silent chains. These sprockets have specially shaped teeth that engage smoothly with the chain, resulting in quieter operation.
- 5. Engineering Class Sprocket: Engineering class sprockets are heavy-duty sprockets used in industrial applications like construction equipment, mining machinery, and agricultural machinery. They are designed to withstand high loads and harsh operating conditions.
- 6. Taper-Lock Sprocket: Taper-lock sprockets have a tapered bore and are mounted on shafts using a locking bushing. They provide a secure and easy-to-install connection and are commonly used in power transmission systems.
- 7. Rack and Pinion: While not a traditional sprocket gear, rack and pinion systems use a linear rack with teeth that mesh with a pinion gear. This combination is used in applications where rotational motion needs to be translated into linear motion, such as in steering systems and CNC machines.
The choice of sprocket gear depends on factors such as the type of chain or belt used, the desired gear ratio, the amount of load the system will handle, and the specific requirements of the application. Each type of sprocket gear offers unique advantages and is tailored to meet the needs of different industries and machinery.
editor by CX 2024-03-13
China wholesaler Chain Wheel Transmission Belt Industrial Automatic Gear Box Conveyor Parts Roller Chains Sprocket Wheel Gear
Product Description
SPROCKET 1/2” X 5/16” 08B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 13.0mm | ||||
| Radius Width C | 1.3mm | ||||
| Tooth Width b1 | 7.0mm | ||||
| Tooth Width B1 | 7.2mm | ||||
| Tooth Width B2 | 21.0mm | ||||
| Tooth Width B3 | 34.9mm | ||||
| 08B SERIES ROLLER CHAINS | |||||
| Pitch | 12.7 mm | ||||
| Internal Width | 7.75 mm | ||||
| Roller Diameter | 8.51 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 37.2 | 33.18 | 8 | 10 | 10 |
| 9 | 41.0 | 37.13 | 8 | 10 | 10 |
| 10 | 45.2 | 41.10 | 8 | 10 | 10 |
| 11 | 48.7 | 45.07 | 10 | 10 | 12 |
| 12 | 53.0 | 49.07 | 10 | 10 | 12 |
| 13 | 57.4 | 53.06 | 10 | 10 | 12 |
| 14 | 61.8 | 57.07 | 10 | 10 | 12 |
| 15 | 65.5 | 61.09 | 10 | 10 | 12 |
| 16 | 69.5 | 65.10 | 10 | 12 | 16 |
| 17 | 73.6 | 69.11 | 10 | 12 | 16 |
| 18 | 77.8 | 73.14 | 10 | 12 | 16 |
| 19 | 81.7 | 77.16 | 10 | 12 | 16 |
| 20 | 85.8 | 81.19 | 10 | 12 | 16 |
| 21 | 89.7 | 85.22 | 12 | 16 | 16 |
| 22 | 93.8 | 89.24 | 12 | 16 | 16 |
| 23 | 98.2 | 93.27 | 12 | 16 | 16 |
| 24 | 101.8 | 97.29 | 12 | 16 | 16 |
| 25 | 105.8 | 101.33 | 12 | 16 | 16 |
| 26 | 110.0 | 105.36 | 16 | 16 | 16 |
| 27 | 114.0 | 109.40 | 16 | 16 | 16 |
| 28 | 118.0 | 113.42 | 16 | 16 | 16 |
| 29 | 122.0 | 117.46 | 16 | 16 | 16 |
| 30 | 126.1 | 121.50 | 16 | 16 | 16 |
| 31 | 130.2 | 125.54 | 16 | 16 | 20 |
| 32 | 134.3 | 129.56 | 16 | 16 | 20 |
| 33 | 138.4 | 133.60 | 16 | 16 | 20 |
| 34 | 142.6 | 137.64 | 16 | 16 | 20 |
| 35 | 146.7 | 141.68 | 16 | 16 | 20 |
| 36 | 151.0 | 145.72 | 16 | 20 | 20 |
| 37 | 154.6 | 149.76 | 16 | 20 | 20 |
| 38 | 158.6 | 153.80 | 16 | 20 | 20 |
| 39 | 162.7 | 157.83 | 16 | 20 | 20 |
| 40 | 166.8 | 161.87 | 16 | 20 | 20 |
| 41 | 171.4 | 165.91 | 20 | 20 | 25 |
| 42 | 175.4 | 169.94 | 20 | 20 | 25 |
| 43 | 179.7 | 173.98 | 20 | 20 | 25 |
| 44 | 183.8 | 178.02 | 20 | 20 | 25 |
| 45 | 188.0 | 182.07 | 20 | 20 | 25 |
| 46 | 192.1 | 186.10 | 20 | 20 | 25 |
| 47 | 196.2 | 190.14 | 20 | 20 | 25 |
| 48 | 200.3 | 194.18 | 20 | 20 | 25 |
| 49 | 204.3 | 198.22 | 20 | 20 | 25 |
| 50 | 208.3 | 202.26 | 20 | 20 | 25 |
| 51 | 212.1 | 206.30 | 20 | 25 | 25 |
| 52 | 216.1 | 210.34 | 20 | 25 | 25 |
| 53 | 220.2 | 214.37 | 20 | 25 | 25 |
| 54 | 224.1 | 218.43 | 20 | 25 | 25 |
| 55 | 228.1 | 222.46 | 20 | 25 | 25 |
| 56 | 232.2 | 226.50 | 20 | 25 | 25 |
| 57 | 236.4 | 230.54 | 20 | 25 | 25 |
| 58 | 240.5 | 234.58 | 20 | 25 | 25 |
| 59 | 244.5 | 238.62 | 20 | 25 | 25 |
| 60 | 248.6 | 242.66 | 20 | 25 | 25 |
| 62 | 256.9 | 250.74 | 25 | 25 | 25 |
| 64 | 265.1 | 258.82 | 25 | 25 | 25 |
| 65 | 269.0 | 262.86 | 25 | 25 | 25 |
| 66 | 273.0 | 266.91 | 25 | 25 | 25 |
| 68 | 281.0 | 274.99 | 25 | 25 | 25 |
| 70 | 289.0 | 283.07 | 25 | 25 | 25 |
| 72 | 297.2 | 291.15 | 25 | 25 | 25 |
| 75 | 309.2 | 303.28 | 25 | 25 | 25 |
| 76 | 313.2 | 307.32 | 25 | 25 | 25 |
| 78 | 321.4 | 315.40 | 25 | 25 | 25 |
| 80 | 329.4 | 323.49 | 25 | 25 | 25 |
| 85 | 349.0 | 343.69 | 25 | 25 | 25 |
| 90 | 369.9 | 363.90 | 25 | 25 | 25 |
| 95 | 390.1 | 384.11 | 25 | 25 | 25 |
| 100 | 410.3 | 404.32 | 25 | 25 | 25 |
| 110 | 450.7 | 444.74 | 25 | 25 | 25 |
| 114 | 466.9 | 460.91 | 25 | 25 | 25 |
| 120 | 491.2 | 485.16 | 25 | 25 | 25 |
| 125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
|
Type: |
Simplex, Duplex, Triplex |
|
Sprocket Model: |
3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″ |
|
Teeth Number: |
9-100 |
|
Standard: |
ANSI , JIS, DIN, ISO |
|
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
|
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
|
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
|
Certification: |
ISO9001 SGS |
|
Quality Inspection: |
Self-check and Final-check |
|
Sample: |
ODM&OEM, Trial Order Available and Welcome |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface, Hardened Tooth Surface |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
What are the best practices for cleaning and maintaining sprocket gears?
Proper cleaning and maintenance are essential for ensuring the longevity and efficient performance of sprocket gears. Here are the best practices for cleaning and maintaining sprocket gears:
1. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear’s lifespan.
2. Cleaning: Clean the sprocket gears regularly to remove dirt, debris, and contaminants that can accelerate wear. Use a soft brush or cloth to clean the sprocket teeth and the surrounding areas.
3. Avoid Harsh Chemicals: When cleaning sprocket gears, avoid using harsh chemicals or solvents that can damage the surface finish or compromise the material’s integrity. Stick to recommended cleaning agents by the manufacturer.
4. Lubrication: Proper lubrication is crucial to reducing friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer’s recommendations for lubrication intervals.
5. Correct Tension: Maintain the correct chain tension to prevent excessive wear on both the sprocket and the chain. Ensure the chain is not too loose or too tight, as both conditions can cause premature wear.
6. Alignment: Check and maintain proper alignment between the sprocket gear and the chain. Misalignment can cause uneven wear and premature failure.
7. Material Selection: Choose sprocket gears made from high-quality and durable materials that are suitable for the specific operating conditions of the application.
8. Overload Prevention: Operate sprocket gears within their recommended load-carrying capacity to prevent premature wear and failure.
9. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material’s properties and lead to accelerated wear.
10. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
By following these best practices for cleaning and maintaining sprocket gears, you can maximize their lifespan, reduce downtime, and optimize the performance of mechanical systems that utilize them.
What are the common problems faced with sprocket gears and how to troubleshoot them?
Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:
- 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
- Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
- 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
- Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
- 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
- Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
- 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
- Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
- 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
- Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application’s load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.
It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.
editor by CX 2024-01-15
China Good quality High Quality Agricultural Machinery Spur Gear Transmission Parts Sprocket Wheel Industrial Gears
Product Description
ZHangZhoug CZPT Machinery Co., Ltd
(DIN/ANSI/JIS Standard or made to drawing)
Product Description:
Detailed Photos:
Company Profile:
ZHangZhoug CZPT Machinery Co., Ltd. Is the vice chairman of chain Transmission Branch of China Machinery General parts Industry Association and a member of China chain Transmission Standardization Technical Committee.
Founded in 1954, mainly engaged in sprocket, gear, timing belt pulley, coupling production and sales, It is a large sprocket manufacturing enterprise in China, and it is also 1 of the largest standard sprocket manufacturers in the world at present. The product structure of the company has been developed from the single pattern of standard sprocket to non-standard transmission parts. Products are mainly sold in North America, South America, Europe, Africa and Japan, South Korea, the Middle East, Russia and Southeast Asia and other countries and regions, sales network all over the world.
The company has passed ISO 9002 quality assurance system certification for the first time in 1999, ISO9001: 2000 quality management system certification in 2003, ISO/TS16949 quality management system certification for the first time in 2009, ISO14001: 2004 environmental management system certification for the first time in 2571, ISO14001: 2015 environmental management system certification for 2017, and ISO9001: 2015 and IATF16949: 2016 quality management system certification for 2018. It lays a CZPT foundation for perfecting the internal management of the enterprise and opening up the external market.
The company adheres to the business philosophy of “Quality is life, technology is physique, delivery is moral, quantity is credit, service is kindred, cost is lifetime”, implementing “innovation-driven, twinning integration” upgrading strategy, promoting chain transmission products to excellence, and making every effort to create “harmonious cenfit, good quality cenfit, hundred years of cenfit”
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | C45 |
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be used for heavy-duty applications in industrial machinery?
Yes, sprocket gears are commonly used in heavy-duty applications in various industrial machinery. Their robust design, high load-carrying capacity, and reliable power transmission make them well-suited for demanding industrial environments. Some of the key reasons sprocket gears are preferred for heavy-duty applications include:
1. Strength and Durability: Sprocket gears are typically made from strong and durable materials, such as hardened steel or cast iron. This allows them to withstand heavy loads and high torques without deformation or failure.
2. High Load Capacity: The tooth profile of sprocket gears, especially those with involute teeth, distributes the load evenly across the gear teeth, enabling them to handle substantial forces and transmit power efficiently.
3. Versatility: Sprocket gears can be designed in various configurations, such as single, double, or triple-strand setups, to accommodate different load requirements. They can also be used in combination with multiple sprockets and chains to create complex power transmission systems.
4. Effective Power Transmission: Sprocket gears provide reliable power transmission with minimal slippage or backlash. This is crucial in heavy-duty machinery, where precision and consistency are essential for optimal performance.
5. Easy Maintenance: Sprocket gears are relatively easy to maintain, as they can be individually replaced if worn or damaged. This reduces downtime and maintenance costs in industrial settings.
6. Adaptability: Sprocket gears can be used with various types of chains, such as roller chains, silent chains, or specialty chains, allowing for adaptation to different industrial applications.
7. Cost-Effective Solution: Considering their durability and long lifespan, sprocket gears offer a cost-effective solution for heavy-duty applications in industrial machinery.
Common examples of heavy-duty industrial machinery that use sprocket gears include conveyor systems, agricultural equipment, mining machinery, construction machinery, and manufacturing equipment.
It is important to select the appropriate sprocket gear size, material, and tooth configuration based on the specific requirements of the machinery and the operating conditions to ensure reliable and efficient performance in heavy-duty industrial applications.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain’s components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer’s guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
What is a sprocket gear, and how does it function in a mechanical system?
A sprocket gear is a toothed wheel with evenly spaced teeth that mesh with a chain, track, or another perforated material. It is an essential component in mechanical systems where rotary motion needs to be transmitted from one shaft to another. Sprocket gears are commonly used in various applications, including bicycles, motorcycles, conveyor systems, and industrial machinery.
Here’s how a sprocket gear functions in a mechanical system:
- Power Transmission: The primary function of a sprocket gear is to transfer rotational motion and power from one shaft to another. When a rotational force (torque) is applied to the input shaft, the teeth of the sprocket engage with the links of the chain. As the input shaft rotates, the chain moves along with it, causing the output shaft connected to the other sprocket to rotate as well.
- Gear Ratio: The number of teeth on the sprocket gears determines the gear ratio, which defines the speed and torque relationship between the input and output shafts. A larger sprocket with more teeth results in higher torque and lower speed, while a smaller sprocket with fewer teeth provides higher speed and lower torque.
- Speed and Torque Conversion: Sprocket gears enable the conversion of speed and torque between shafts. By selecting different sprocket sizes, mechanical systems can achieve the desired balance of speed and torque for their specific applications. This is especially useful in scenarios where the input and output shafts need to rotate at different speeds or generate different levels of force.
- Directional Change: In some applications, sprocket gears can also change the direction of rotation. By using multiple sprockets and a chain, mechanical systems can transfer power around corners or between non-parallel shafts.
- Chain Engagement: The teeth on the sprocket gear are designed to mesh precisely with the links of the chain, ensuring a positive engagement. This allows for a reliable transfer of motion and power, preventing slippage and ensuring efficient operation.
- Noise and Vibration Damping: Sprocket gears with well-machined teeth and proper lubrication can reduce noise and vibration in mechanical systems, leading to smoother and quieter operation.
Overall, sprocket gears play a critical role in power transmission systems, providing a simple and effective means of transferring motion and energy between rotating shafts. Their versatility and efficiency make them indispensable components in various mechanical applications.
editor by CX 2024-01-10
China wholesaler Industrial Sprocket Transmission Precision Parts Automotive Gears for Transmission Planetary/Transmission/Starter Gear/Spur Gear
Product Description
Company Profile
HangZhou Xihu (West Lake) Dis. Mechanical Transmission Parts Co., Ltd. is a professional manufacturer of mechanical transmission parts, founded in 1987. Our company is committed to standard roller sprocket, single row and multi-row sprocket, non-standard sprocket, gear, rack, bevel gear, sprocket, shaft, gear shaft and other products. We have passed ISO 9001 .Xihu (West Lake) Dis. company has a number of experienced engineers, involved in plHangZhou, testing, heat treatment, inspection, the use of strict and accurate testing methods. Our sprockets are widely used in agricultural machinery, stereoscopic garage, mining equipment, woodworking machinery, petroleum machinery and other industries. Implementation standards such as ANSI.BS, DIN.KANA, etc., can also be customized according to the drawing processing
Our products have won wide praise and trust from customers for their excellent quality. HangZhou Xihu (West Lake) Dis. mechanical transmission Parts Co., Ltd. adhere to the quality of survival, innovation and development, customer first business philosophy, dedicated to domestic and foreign customers service. We warmly welcome you to negotiate business with us.
Product Description
| Standard or Nonstandard | Standard | Application | Maqchinery | |
| Hardness | Hardened Tooth Surface | Material | C45 | |
| Specification | Various Sprockets | Pitch(PCD) | 1-10M | |
| Toothed Portion Shape | Spur Gear | Teeth | 10-60Z | |
| HS Code | 84839000 | Production Capacity | 100000 Pcs/Year |
Detailed Photos
Certifications
FAQ
1. Are you manufacturer or trade company ?
We are a manufacturing factory founded in 1987 ,with trade team for international service.
2. What terms of payment you usually use ?
T/T . 30% deposit ,and 70% before finish production .Price :FOB ZheJiang .
3. Can you make products according to customer”s design ?
Yes , we can make according to customer”s drawing and samples .OED and ODM are acceptable.
4.How long is your delivery time ?
Genarally it is 5-15 days afte rthe deposit .It will take more days customized.
5. What do I need for offering a quote ?
Please offer us 2D or 3d drawing (with material ,dimension,surface treatment and other technical datas etc.), quantity ,or samples .
Then we will quote the best price .
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Gear Position: | External Gear |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | Order Sample free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the noise and vibration levels associated with sprocket gear systems?
The noise and vibration levels associated with sprocket gear systems can vary depending on several factors. Here are some key points to consider regarding noise and vibration:
1. Gear Design: The design of the sprocket gears, including the number of teeth, pitch, and tooth profile, can influence noise and vibration levels. Gears with irregular tooth profiles or incorrect meshing can generate higher levels of noise and vibration.
2. Gear Material: The material used for manufacturing the sprocket gears can impact noise and vibration. High-quality gears made from materials with good damping properties can help reduce vibrations and noise during operation.
3. Lubrication: Proper lubrication is essential for reducing friction and wear between gear teeth. Inadequate or improper lubrication can lead to increased noise and vibration levels due to metal-to-metal contact.
4. Alignment: Misalignment between the sprocket gears can cause uneven loading and increased noise. Proper alignment ensures smooth and efficient power transmission, minimizing noise and vibration.
5. Load Distribution: Uniform load distribution among the gear teeth is crucial for smooth operation. Uneven loads can lead to noise and vibration issues.
6. Gear Condition: Wear and damage to the gear teeth over time can result in increased noise and vibration. Regular inspection and maintenance are necessary to address any wear-related issues promptly.
7. Operating Speed: Higher operating speeds can increase noise and vibration levels, especially if the gears are not properly balanced and aligned.
8. Housing and Mounting: The design and construction of the gear housing and mounting can affect noise transmission. A well-designed housing can help dampen noise and prevent vibrations from spreading to other parts of the machinery.
9. Operating Environment: The operating environment, such as temperature and humidity, can influence gear performance and noise levels.
Sprocket gear systems can be engineered and maintained to minimize noise and vibration levels. Using high-quality materials, proper lubrication, correct alignment, and regular maintenance can significantly reduce noise and vibration, ensuring smooth and efficient operation of the machinery.
What are the load-carrying capacities of different sprocket gear configurations?
Load-carrying capacity is a critical factor to consider when selecting a sprocket gear configuration for a specific application. The load-carrying capacity of a sprocket gear depends on various factors, including the material and design of the sprocket, the size and number of teeth, and the type of chain used in conjunction with the sprocket.
Here are some factors that influence the load-carrying capacities of different sprocket gear configurations:
1. Material: The choice of material significantly impacts the load-carrying capacity of the sprocket gear. High-strength materials, such as hardened steel or alloy materials, are often used for heavy-duty applications, as they can withstand higher loads without deformation or failure.
2. Number of Teeth: Sprocket gears with more teeth typically distribute the load over a larger surface area, which can improve their load-carrying capacity. However, an increase in the number of teeth may also lead to higher friction losses in the system.
3. Tooth Profile: The shape of the sprocket gear teeth, such as standard or modified tooth profiles, can affect the load distribution and efficiency of the gear system.
4. Chain Type: The type of chain used with the sprocket gear is crucial in determining the overall load-carrying capacity of the system. Different chain designs, such as roller chains or silent chains, have varying load-carrying capabilities.
It is essential to consult the manufacturer’s specifications and engineering data when determining the load-carrying capacity of a particular sprocket gear configuration. Additionally, factors like the speed of operation, environmental conditions, and duty cycle should also be considered to ensure the sprocket gear is appropriately sized for the application.
In heavy-duty and high-load applications, engineers often conduct detailed calculations and simulations to ensure the sprocket gear system can handle the required loads safely and reliably. Proper maintenance and periodic inspections are essential to preserve the load-carrying capacity and extend the life of the sprocket gear system.
Can you explain the working principle of a sprocket gear transmission?
A sprocket gear transmission is a type of power transmission system that uses sprockets and a chain or a belt to transfer rotational motion and power between two or more shafts. The working principle of a sprocket gear transmission involves the following key steps:
- Input Shaft: The power input is provided to one of the sprockets, which is mounted on an input shaft. This can be a motor, engine, or any other rotational power source.
- Teeth Engagement: The sprockets have evenly spaced teeth that engage with the links of the chain or the teeth of the belt. As the input shaft rotates, it drives the chain or belt by engaging with these teeth.
- Chain or Belt Movement: As the input shaft rotates, it causes the chain or belt to move along the sprockets. The chain or belt wraps around the circumference of the sprockets, and the teeth of the sprockets mesh with the links of the chain or the teeth of the belt.
- Output Shaft: On the other end of the chain or belt, there is another sprocket mounted on the output shaft. As the chain or belt moves and wraps around the output sprocket, it causes the output shaft to rotate.
- Power Transfer: The rotational motion and power from the input shaft are transferred to the output shaft through the chain or belt and the sprockets. The gear ratio between the input and output sprockets determines the speed and torque relationship between the two shafts.
Sprocket gear transmissions are widely used in various applications due to their efficiency, reliability, and ability to transmit power over long distances. They are commonly found in bicycles, motorcycles, industrial machinery, conveyor systems, and many other mechanical systems.
editor by CX 2023-12-27
China Good quality High Quality Agricultural Machinery Spur Gear Transmission Parts Sprocket Wheel Industrial Gears
Product Description
ZHangZhoug CZPT Machinery Co., Ltd
(DIN/ANSI/JIS Standard or made to drawing)
Product Description:
Detailed Photos:
Company Profile:
ZHangZhoug CZPT Machinery Co., Ltd. Is the vice chairman of chain Transmission Branch of China Machinery General parts Industry Association and a member of China chain Transmission Standardization Technical Committee.
Founded in 1954, mainly engaged in sprocket, gear, timing belt pulley, coupling production and sales, It is a large sprocket manufacturing enterprise in China, and it is also 1 of the largest standard sprocket manufacturers in the world at present. The product structure of the company has been developed from the single pattern of standard sprocket to non-standard transmission parts. Products are mainly sold in North America, South America, Europe, Africa and Japan, South Korea, the Middle East, Russia and Southeast Asia and other countries and regions, sales network all over the world.
The company has passed ISO 9002 quality assurance system certification for the first time in 1999, ISO9001: 2000 quality management system certification in 2003, ISO/TS16949 quality management system certification for the first time in 2009, ISO14001: 2004 environmental management system certification for the first time in 2571, ISO14001: 2015 environmental management system certification for 2017, and ISO9001: 2015 and IATF16949: 2016 quality management system certification for 2018. It lays a CZPT foundation for perfecting the internal management of the enterprise and opening up the external market.
The company adheres to the business philosophy of “Quality is life, technology is physique, delivery is moral, quantity is credit, service is kindred, cost is lifetime”, implementing “innovation-driven, twinning integration” upgrading strategy, promoting chain transmission products to excellence, and making every effort to create “harmonious cenfit, good quality cenfit, hundred years of cenfit”
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | C45 |
| Customization: |
Available
| Customized Request |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
Can sprocket gears be used in precision motion control systems?
Yes, sprocket gears can be used in precision motion control systems, but there are some considerations to keep in mind. Precision motion control systems require high accuracy, repeatability, and low backlash to achieve precise positioning and movement. Sprocket gears can meet these requirements under certain conditions:
1. Quality Manufacturing: To ensure precision, sprocket gears used in motion control systems must be of high quality and precision-manufactured. They should have accurate tooth profiles and minimal manufacturing defects.
2. Tight Tolerances: Precision motion control systems require sprocket gears with tight tolerances to minimize variations in tooth engagement. This ensures consistent motion and positioning.
3. Low Backlash: Backlash is the amount of clearance between engaged teeth, and it can cause positioning errors in motion control systems. High-quality sprocket gears with proper installation and alignment can help reduce backlash.
4. Proper Lubrication: Lubrication is critical for reducing friction and wear in precision motion control systems. Using the right lubricant in the right amount is essential for smooth and accurate operation.
5. Alignment and Maintenance: Proper alignment during installation and regular maintenance are crucial for preserving the precision of the sprocket gear system. Misalignment or wear can compromise the system’s accuracy.
It’s important to select sprocket gears that match the specific requirements of the motion control application. While sprocket gears can work well in precision motion control systems, some applications may benefit from other types of gearing systems, such as gear racks or timing belts, depending on the complexity and demands of the motion control task.
Before integrating sprocket gears into a precision motion control system, it’s advisable to consult with engineers or experts familiar with both the application’s requirements and the capabilities of sprocket gear systems. This will ensure that the selected gearing solution is optimized for precision and reliability in the motion control application.
How do you select the right size and pitch of a sprocket gear for a specific application?
Choosing the correct size and pitch of a sprocket gear is crucial to ensure optimal performance and efficiency in a specific application. Here’s a step-by-step guide to help you make the right selection:
- Identify the Application Requirements: Understand the specific requirements of your application, including the desired speed, torque, power transmission, and operating conditions.
- Calculate the Gear Ratio: Determine the gear ratio required for your application. The gear ratio is the ratio of the number of teeth between the driving and driven sprockets and determines the speed and torque relationship between them.
- Consider the Pitch: The pitch of a sprocket refers to the distance between the centers of adjacent teeth. It is essential to choose sprockets with the same pitch as the chain or belt you plan to use in your transmission system.
- Choose the Number of Teeth: Once you have the gear ratio and pitch, calculate the number of teeth for both the driving and driven sprockets. The number of teeth affects the speed and torque characteristics of the transmission system.
- Verify Shaft Compatibility: Ensure that the sprocket gear’s bore size matches the diameter of your application’s input and output shafts.
- Consider Material and Strength: Select sprocket gears made from materials suitable for your application’s operating conditions. For heavy-duty applications, choose sprockets with high strength and wear resistance.
- Check Center Distance: Verify the center distance between the driving and driven sprockets to ensure proper chain or belt tension and alignment.
- Review Manufacturer Recommendations: Manufacturers often provide guidelines and specifications for their sprocket gears. Review their recommendations and consult with experts if necessary.
- Perform Regular Maintenance: Once the sprocket gear is installed, conduct regular maintenance, including lubrication and inspection, to ensure longevity and optimal performance.
Choosing the right size and pitch of a sprocket gear requires careful consideration of various factors to meet the specific needs of your application. By following these steps and consulting with experts when needed, you can select the most suitable sprocket gear for your mechanical system.
editor by CX 2023-11-14
China OEM High Quality Agricultural Machinery Spur Gear Transmission Parts Sprocket Wheel Industrial Gears
Product Description
We are a professional company in bulk material handling, transportation, storage, processing, accessory equipment design, integration and manufacturing. We can provide a complete set of solutions. Thank you for reading the information and welcome to purchase! Welcome to agent distribution!
Brief introduction of the company’s manufacturing capacity
The company’s headquarters, technology and sales are located in Lingang New Area of China (ZheJiang ) pilot free trade zone,The company’s manufacture base is located in Xihu (West Lake) Dis. county, ZHangZhoug Province, which is known as “the most beautiful county in China”. It is 65 kilometers away from HangZhou city and 60 kilometers away from Qiandao Lake. The transportation to Xihu (West Lake) Dis. county from other places is very convenient. No matter by railway, highway or waterway. The manufacture base has a total plant area of around 30000 square CZPT and workshop is equipped with more than 300 sets of various advance manufacture equipment, including 20 sets of CNC precision vertical lathe MODEL: SMVTM12000×50/150, CNC vertical lathe MODEL:DVT8000×30/32, CNC horizontal lathe, MODEL: CK61315×125/32, CNC horizontal lathe MODEL:CK61200×80/32, CNC Grounding boring and milling machine MODEL:TJK6920,etc.Most of the parts are machined by using CNC machine equipment. Theis is a hot treatment CZPT with size 10.5m×8m×8m. The manufacture base also equipped with lifting capacity of 25t, 50t, 100t, 200t overhead crane to handle heavy workpiece and assembly work.
Products and services available
Material handling equipment
Storage equipment
Conveying equipment
Feeding equipment
Component of conveying system
Belt conveyor parts
Large and medium sized finishing parts
If you need above products, please contact us!
ZheJiang Sunshine Industrial Technology Co. , Ltd.
| After-sales Service: | 12 Month |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Customized |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the differences between chain sprockets and sprocket gears?
Chain Sprockets and Sprocket Gears are both integral components of mechanical power transmission systems, but they have some key differences in terms of their design, application, and mode of operation.
Chain Sprockets:
Chain sprockets are toothed wheels with evenly spaced teeth or cogs that mesh with the links of a roller chain. They are primarily used in chain and sprocket systems to transfer rotational motion and torque between two parallel shafts. The teeth of chain sprockets are designed to fit precisely with the chain, ensuring smooth and efficient power transmission.
Key features of chain sprockets:
- Designed for use with roller chains.
- Transfer motion between parallel shafts.
- Teeth mesh with the links of the chain.
- Used in various applications, including bicycles, motorcycles, conveyors, and industrial machinery.
Sprocket Gears:
Sprocket gears, on the other hand, are toothed wheels with teeth that mesh with the links of a toothed belt or chain. They are part of belt drive systems and chain drive systems, transferring motion and power between non-parallel shafts. Sprocket gears are commonly used in applications where a longer distance separates the driving and driven shafts.
Key features of sprocket gears:
- Designed for use with toothed belts or chains.
- Transfer motion between non-parallel shafts.
- Teeth mesh with the links of the belt or chain.
- Used in applications like internal combustion engines, washing machines, and industrial machinery.
Main Differences:
- Design: Chain sprockets have teeth that mesh with the links of a roller chain, while sprocket gears have teeth that mesh with the links of a toothed belt or chain.
- Application: Chain sprockets are used in chain drive systems for parallel shafts, while sprocket gears are used in belt drive and chain drive systems for non-parallel shafts.
- Shaft Orientation: Chain sprockets work with parallel shafts, while sprocket gears accommodate non-parallel shafts.
- Power Transmission: Both are used for power transmission but in different configurations and applications.
Ultimately, the choice between chain sprockets and sprocket gears depends on the specific mechanical system’s requirements, shaft orientation, and the type of power transmission needed.
How do I calculate the pitch circle diameter for a sprocket gear system?
Calculating the pitch circle diameter is essential when designing or working with a sprocket gear system. The pitch circle diameter (PCD) represents the circle on which the centers of the sprocket teeth lie. To calculate the pitch circle diameter, you’ll need to know the number of teeth on the sprocket and the pitch diameter.
Step 1: Determine the Number of Teeth (N): Count the total number of teeth on the sprocket. This value is denoted as ‘N’.
Step 2: Find the Pitch Diameter (PD): The pitch diameter is the diameter of the pitch circle on which the teeth are located. If you already have the pitch diameter provided, proceed to the next step. Otherwise, you can calculate the pitch diameter using the formula:
PD = N / (DP * π)
Where:
PD = Pitch Diameter
N = Number of Teeth
DP = Diametral Pitch (teeth per inch)
π (Pi) = 3.14159 (approximately)
Step 3: Calculate the Pitch Circle Diameter (PCD): The pitch circle diameter can be calculated using the following formula:
PCD = PD * cos(180° / N)
Where:
PCD = Pitch Circle Diameter
PD = Pitch Diameter (calculated in Step 2)
N = Number of Teeth
The resulting value of the pitch circle diameter will help you in various aspects of sprocket gear system design and analysis, such as determining the center distance between two sprockets or matching the sprocket with a compatible chain.
Remember that accurate measurements and precise calculations are crucial for successful sprocket gear system performance. If you are unsure about the calculations or dealing with complex sprocket configurations, consulting with a qualified engineer or using specialized software can be beneficial.
What are the common problems faced with sprocket gears and how to troubleshoot them?
Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:
- 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
- Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
- 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
- Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
- 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
- Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
- 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
- Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
- 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
- Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application’s load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.
It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.
editor by CX 2023-11-01
China supplier Industrial Chain Sprocket Gear with Hub
Product Description
Product Description
|
DIN Standard Industrial Sprocket |
|
|
Bore |
Finished bore, Precossing bore, Taper bore |
|
Color |
Nature steel or black |
|
Standard |
ANSI, DIN, ISO |
|
Type |
Simplex, Duplex, Triplex |
|
Surface treatment |
Black oxide, Zinc plated |
|
Heat treatment |
High Frenquency Quenching |
Detailed Photos
1.Chain used
HRSY sprocketes are manufactured with a tooth profile and dimensional precision to bring out the maximum performance of the chain you will use.
2. Number of teeth
HRSY sprockets are available with small and large numbers of teeth to match your usage conditions.
|
Single pitch sprocket |
Double pitch sprocket |
||||
|
*Chain matched:35(06C) /06BTeeth:from 9-120 *Chain matched:40(08A) /08BTeeth:from 9-120 *Chain matched:50(10A) /10BTeeth:from 9-120 *Chain matched:60(12A) /12BTeeth:from 9-120 *Chain matched:80(16A) /16B Teeth:from 9-120 *Chain matched:100(20A)/20B Teeth:from 9-120 *Chain matched:120(24A) /24B Teeth:from 9-120 *Chain matched:140(28A) /28B Teeth:from 9-120 *Chain matched:160(32A) /32B Teeth:from 9-120 *Chain matched:200(40A) /40B Teeth:from 9-120 |
*P=25.4mm Teeth:from 7-100
*P=31.8mm Teeth:from 7-100
*P=38.1mm Teeth:from 7-100
*P=50.8mm Teeth:from 7-100
*P=63.5mm Teeth:from 7-100 |
||||
3. Consturction
A type B type C type SD type
4. Material
Carbon Steel, Stainless Steel,Aluminum, Nylon, POM, Copper, Brass,42CrMo,40Cr,A3 and so on.
5. Bore
Pilot bore, finished bore, taper bore, bearing hole and special bore
6. Treatment
Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on.
Surface Treatment: Zinc Plating, Chrome plated, Black oxide Treatment, Spray Paint, Mirror Finish, Sand-blasting and so on.
Packaging & Shipping
Company Profile
ZheJiang Haorongshengye Electrical Equipment Co., Ltd.
1. Was founded in 2008
2. Our Principle:
“Credibility Supremacy, and Customer First”
3. Our Promise:
“High quality products, and Excellent Service”
4. Our Value:
“Being Honesty, Doing the Best, and Long-lasting Development”
5. Our Aim:
“Develop to be a leader in the power transmission parts industry in the world”
|
6.Our services: |
1).Competitive price |
|||
|
2).High quality products |
||||
|
3).OEM service or can customized according to your drawings |
||||
|
4).Reply your inquiry in 24 hours |
||||
|
5).Professional technical team 24 hours online service |
||||
|
6).Provide sample service |
||||
Main products
Machines
Exbihition
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Machinery |
| Hardness: | Hardened Tooth Surface |
| Material: | Stainless Steel |
| Teeth Number: | 8-100t |
| Pitch: | 6.35-100mm |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can sprocket gears be used for vertical power transmission?
Yes, sprocket gears can be used for vertical power transmission in certain applications. Vertical power transmission involves transferring rotational power between two shafts that are oriented vertically, with one shaft positioned above the other. In such cases, sprocket gears, also known as chain sprockets when used with chains, can offer an efficient and reliable solution for transmitting power.
The main advantage of using sprocket gears for vertical power transmission is their ability to maintain a positive engagement with the chain, ensuring a consistent and smooth transfer of power. This positive engagement is particularly beneficial in vertical applications where gravity can potentially cause other types of gears, such as spur gears or bevel gears, to disengage or produce excessive wear.
Sprocket gears are commonly employed in vertical power transmission systems in various industries, including manufacturing, material handling, and construction. Examples of vertical power transmission applications using sprocket gears include:
1. Vertical Conveyor Systems: Sprocket gears, in combination with conveyor chains, are often used to transport materials vertically between different levels of a facility.
2. Elevators: Sprocket gears and chains are utilized in elevator systems to lift and lower the elevator car in buildings or industrial settings.
3. Vertical Lifts: Sprocket gears play a crucial role in vertical lift systems that move heavy loads between floors or levels.
4. Agricultural Equipment: Sprocket gears are used in vertical power transmission systems of agricultural machinery, such as grain elevators.
When implementing sprocket gears for vertical power transmission, it is essential to consider the load, speed, torque requirements, and system dynamics to ensure safe and efficient operation. Additionally, proper lubrication and regular maintenance are crucial for maximizing the lifespan and performance of the sprocket gear system.
Overall, sprocket gears offer a reliable and versatile solution for vertical power transmission, making them a popular choice in numerous industrial and commercial applications.
Can sprocket gears be used in robotics and automation?
Yes, sprocket gears are commonly used in robotics and automation applications due to their versatility, efficiency, and ability to transmit power between parallel shafts. They offer several advantages that make them suitable for various robotic and automation systems:
1. Power Transmission: Sprocket gears are excellent for power transmission in robotics and automation. They allow precise control over the motion and speed of robotic components, making them ideal for tasks that require accurate positioning and timing.
2. High Efficiency: The meshing of teeth between the sprocket gear and the chain results in minimal friction, providing high mechanical efficiency. This is crucial for energy-efficient operation, especially in battery-powered robots or automation systems.
3. Compact Design: Sprocket gear systems are compact and can be integrated into the limited space of robotic joints and other mechanisms. They offer a lightweight solution without compromising strength and durability.
4. Low Noise: When properly lubricated and maintained, sprocket gears produce minimal noise during operation, contributing to quieter robotic and automation systems.
5. High Load-Carrying Capacity: Sprocket gears can handle significant loads, making them suitable for various robotic applications, including heavy lifting, material handling, and industrial automation.
6. Precise Positioning: Sprocket gears enable accurate positioning, which is essential in tasks that require repetitive and precise movements, such as pick-and-place operations and assembly tasks.
7. Easy Customization: Sprocket gears are available in various sizes, types, and materials, allowing for easy customization to meet specific robotic and automation requirements.
8. Reliability: With proper maintenance, sprocket gear systems can provide long-lasting and reliable performance, reducing downtime and maintenance costs in robotic and automation applications.
Overall, sprocket gears play a vital role in the design and operation of robotic systems, enabling precise motion control, high efficiency, and reliable power transmission. Their versatility makes them a popular choice in a wide range of robotic and automation applications across industries.
How do I calculate the gear ratio for a sprocket gear system?
Calculating the gear ratio for a sprocket gear system is essential for understanding how the rotational speed and torque are transmitted between the driving and driven sprockets. The gear ratio (GR) is a measure of the speed and torque multiplication or reduction between the two sprockets.
The gear ratio is determined by the ratio of the number of teeth on the driving sprocket (ND) to the number of teeth on the driven sprocket (NDR). The formula to calculate the gear ratio is as follows:
Gear Ratio (GR) = ND / NDR
Where:
- ND is the number of teeth on the driving sprocket.
- NDR is the number of teeth on the driven sprocket.
For example, if the driving sprocket has 20 teeth, and the driven sprocket has 40 teeth, the gear ratio would be:
GR = 20 / 40 = 0.5
In this example, the gear ratio is 0.5, which means the driven sprocket rotates at half the speed of the driving sprocket, but with twice the torque. This is a speed reduction gear ratio.
Conversely, if the driven sprocket had 20 teeth and the driving sprocket had 40 teeth, the gear ratio would be:
GR = 40 / 20 = 2
In this case, the gear ratio is 2, indicating a speed increase gear ratio. The driven sprocket would rotate twice as fast as the driving sprocket, but with half the torque.
Calculating the gear ratio is crucial for selecting the appropriate sprockets for a desired application. Gear ratios affect the output speed, torque, and overall performance of the mechanical system, so choosing the right gear ratio is essential for achieving the desired results.
editor by CX 2023-10-27