Product Description
SPROCKET 1/2” X 5/16” 08B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 13.0mm | ||||
| Radius Width C | 1.3mm | ||||
| Tooth Width b1 | 7.0mm | ||||
| Tooth Width B1 | 7.2mm | ||||
| Tooth Width B2 | 21.0mm | ||||
| Tooth Width B3 | 34.9mm | ||||
| 08B SERIES ROLLER CHAINS | |||||
| Pitch | 12.7 mm | ||||
| Internal Width | 7.75 mm | ||||
| Roller Diameter | 8.51 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 37.2 | 33.18 | 8 | 10 | 10 |
| 9 | 41.0 | 37.13 | 8 | 10 | 10 |
| 10 | 45.2 | 41.10 | 8 | 10 | 10 |
| 11 | 48.7 | 45.07 | 10 | 10 | 12 |
| 12 | 53.0 | 49.07 | 10 | 10 | 12 |
| 13 | 57.4 | 53.06 | 10 | 10 | 12 |
| 14 | 61.8 | 57.07 | 10 | 10 | 12 |
| 15 | 65.5 | 61.09 | 10 | 10 | 12 |
| 16 | 69.5 | 65.10 | 10 | 12 | 16 |
| 17 | 73.6 | 69.11 | 10 | 12 | 16 |
| 18 | 77.8 | 73.14 | 10 | 12 | 16 |
| 19 | 81.7 | 77.16 | 10 | 12 | 16 |
| 20 | 85.8 | 81.19 | 10 | 12 | 16 |
| 21 | 89.7 | 85.22 | 12 | 16 | 16 |
| 22 | 93.8 | 89.24 | 12 | 16 | 16 |
| 23 | 98.2 | 93.27 | 12 | 16 | 16 |
| 24 | 101.8 | 97.29 | 12 | 16 | 16 |
| 25 | 105.8 | 101.33 | 12 | 16 | 16 |
| 26 | 110.0 | 105.36 | 16 | 16 | 16 |
| 27 | 114.0 | 109.40 | 16 | 16 | 16 |
| 28 | 118.0 | 113.42 | 16 | 16 | 16 |
| 29 | 122.0 | 117.46 | 16 | 16 | 16 |
| 30 | 126.1 | 121.50 | 16 | 16 | 16 |
| 31 | 130.2 | 125.54 | 16 | 16 | 20 |
| 32 | 134.3 | 129.56 | 16 | 16 | 20 |
| 33 | 138.4 | 133.60 | 16 | 16 | 20 |
| 34 | 142.6 | 137.64 | 16 | 16 | 20 |
| 35 | 146.7 | 141.68 | 16 | 16 | 20 |
| 36 | 151.0 | 145.72 | 16 | 20 | 20 |
| 37 | 154.6 | 149.76 | 16 | 20 | 20 |
| 38 | 158.6 | 153.80 | 16 | 20 | 20 |
| 39 | 162.7 | 157.83 | 16 | 20 | 20 |
| 40 | 166.8 | 161.87 | 16 | 20 | 20 |
| 41 | 171.4 | 165.91 | 20 | 20 | 25 |
| 42 | 175.4 | 169.94 | 20 | 20 | 25 |
| 43 | 179.7 | 173.98 | 20 | 20 | 25 |
| 44 | 183.8 | 178.02 | 20 | 20 | 25 |
| 45 | 188.0 | 182.07 | 20 | 20 | 25 |
| 46 | 192.1 | 186.10 | 20 | 20 | 25 |
| 47 | 196.2 | 190.14 | 20 | 20 | 25 |
| 48 | 200.3 | 194.18 | 20 | 20 | 25 |
| 49 | 204.3 | 198.22 | 20 | 20 | 25 |
| 50 | 208.3 | 202.26 | 20 | 20 | 25 |
| 51 | 212.1 | 206.30 | 20 | 25 | 25 |
| 52 | 216.1 | 210.34 | 20 | 25 | 25 |
| 53 | 220.2 | 214.37 | 20 | 25 | 25 |
| 54 | 224.1 | 218.43 | 20 | 25 | 25 |
| 55 | 228.1 | 222.46 | 20 | 25 | 25 |
| 56 | 232.2 | 226.50 | 20 | 25 | 25 |
| 57 | 236.4 | 230.54 | 20 | 25 | 25 |
| 58 | 240.5 | 234.58 | 20 | 25 | 25 |
| 59 | 244.5 | 238.62 | 20 | 25 | 25 |
| 60 | 248.6 | 242.66 | 20 | 25 | 25 |
| 62 | 256.9 | 250.74 | 25 | 25 | 25 |
| 64 | 265.1 | 258.82 | 25 | 25 | 25 |
| 65 | 269.0 | 262.86 | 25 | 25 | 25 |
| 66 | 273.0 | 266.91 | 25 | 25 | 25 |
| 68 | 281.0 | 274.99 | 25 | 25 | 25 |
| 70 | 289.0 | 283.07 | 25 | 25 | 25 |
| 72 | 297.2 | 291.15 | 25 | 25 | 25 |
| 75 | 309.2 | 303.28 | 25 | 25 | 25 |
| 76 | 313.2 | 307.32 | 25 | 25 | 25 |
| 78 | 321.4 | 315.40 | 25 | 25 | 25 |
| 80 | 329.4 | 323.49 | 25 | 25 | 25 |
| 85 | 349.0 | 343.69 | 25 | 25 | 25 |
| 90 | 369.9 | 363.90 | 25 | 25 | 25 |
| 95 | 390.1 | 384.11 | 25 | 25 | 25 |
| 100 | 410.3 | 404.32 | 25 | 25 | 25 |
| 110 | 450.7 | 444.74 | 25 | 25 | 25 |
| 114 | 466.9 | 460.91 | 25 | 25 | 25 |
| 120 | 491.2 | 485.16 | 25 | 25 | 25 |
| 125 | 511.3 | 505.37 | 25 | 25 | 25 |
BASIC INFO.
|
Type: |
Simplex, Duplex, Triplex |
|
Sprocket Model: |
3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″ |
|
Teeth Number: |
9-100 |
|
Standard: |
ANSI , JIS, DIN, ISO |
|
Material: |
1571, 1045, SS304 , SS316; As Per User Request. |
|
Performance Treatment: |
Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding |
|
Surface Treatment: |
Black of Oxidation, Zincing, Nickelage. |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
|
Certification: |
ISO9001 SGS |
|
Quality Inspection: |
Self-check and Final-check |
|
Sample: |
ODM&OEM, Trial Order Available and Welcome |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 10 days for samples. 15 days for official order. |
INSTALLATION AND USING
The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface, Hardened Tooth Surface |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
What are the best practices for cleaning and maintaining sprocket gears?
Proper cleaning and maintenance are essential for ensuring the longevity and efficient performance of sprocket gears. Here are the best practices for cleaning and maintaining sprocket gears:
1. Regular Inspection: Conduct routine visual inspections to check for signs of wear, damage, or misalignment. Detecting and addressing issues early can prevent further damage and extend the sprocket gear’s lifespan.
2. Cleaning: Clean the sprocket gears regularly to remove dirt, debris, and contaminants that can accelerate wear. Use a soft brush or cloth to clean the sprocket teeth and the surrounding areas.
3. Avoid Harsh Chemicals: When cleaning sprocket gears, avoid using harsh chemicals or solvents that can damage the surface finish or compromise the material’s integrity. Stick to recommended cleaning agents by the manufacturer.
4. Lubrication: Proper lubrication is crucial to reducing friction and wear between the sprocket teeth and the chain. Use high-quality lubricants suitable for the specific application and follow the manufacturer’s recommendations for lubrication intervals.
5. Correct Tension: Maintain the correct chain tension to prevent excessive wear on both the sprocket and the chain. Ensure the chain is not too loose or too tight, as both conditions can cause premature wear.
6. Alignment: Check and maintain proper alignment between the sprocket gear and the chain. Misalignment can cause uneven wear and premature failure.
7. Material Selection: Choose sprocket gears made from high-quality and durable materials that are suitable for the specific operating conditions of the application.
8. Overload Prevention: Operate sprocket gears within their recommended load-carrying capacity to prevent premature wear and failure.
9. Temperature Considerations: Be mindful of the operating temperature range of the sprocket gear material. Extreme temperatures can affect the material’s properties and lead to accelerated wear.
10. Regular Maintenance: Establish a regular maintenance schedule to inspect, clean, and lubricate the sprocket gears. Replace any worn or damaged components promptly.
By following these best practices for cleaning and maintaining sprocket gears, you can maximize their lifespan, reduce downtime, and optimize the performance of mechanical systems that utilize them.
What are the common problems faced with sprocket gears and how to troubleshoot them?
Sprocket gears, like any mechanical components, can encounter various issues during their operation. Some common problems and their troubleshooting approaches are as follows:
- 1. Excessive Wear: Over time, sprocket gears may wear down due to friction and load. This can lead to poor performance and affect the overall efficiency of the system.
- Troubleshooting: Regularly inspect the sprocket gears for signs of wear. If wear is detected, consider replacing the worn-out gears with new ones. Lubrication can also help reduce wear and prolong the lifespan of the gears.
- 2. Misalignment: Improper alignment between the sprocket gear and the chain or other components can cause uneven wear and noise.
- Troubleshooting: Check the alignment of the sprocket gear with the chain or other mating components. Adjust and realign the gears if necessary to ensure proper alignment.
- 3. Chain Skipping: Chain skipping occurs when the chain fails to engage properly with the sprocket teeth, causing jerky motion and potential damage to the chain.
- Troubleshooting: Check for any misalignment or excessive wear that may be causing the chain to skip. Replace any worn-out components and ensure proper tension in the chain to prevent skipping.
- 4. Noise and Vibration: Excessive noise and vibration during operation can indicate issues with the sprocket gear system.
- Troubleshooting: Inspect the gears for wear, misalignment, or damage that could be causing the noise and vibration. Proper lubrication and alignment can often help reduce noise and vibration levels.
- 5. Fatigue Failure: Sprocket gears can fail due to material fatigue, especially if subjected to high loads and stress.
- Troubleshooting: Select sprocket gears made from high-quality materials and appropriate strength to handle the application’s load. Regularly inspect for signs of fatigue, such as cracks or deformations, and replace any compromised gears.
It is essential to perform regular maintenance, including lubrication, alignment checks, and visual inspections, to prevent and address these common issues. Early detection and timely troubleshooting can significantly extend the lifespan and performance of sprocket gears in a mechanical system.
editor by CX 2024-01-15
China Professional Chain Wheel Gearbox Belt Transmission Conveyor Parts Short Pitch Precision Roller Chains Sprocket Steel Gear
Product Description
SPROCKET 5/8” X 3/8” 10B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 16.0mm | ||||
| Radius Width C | 1.6mm | ||||
| Tooth Width b1 | 9.0mm | ||||
| Tooth Width B1 | 9.1mm | ||||
| Tooth Width B2 | 25.5mm | ||||
| Tooth Width B3 | 42.1mm | ||||
| 10B SERIES ROLLER CHAINS | |||||
| Pitch | 15.875 mm | ||||
| Internal Width | 9.65 mm | ||||
| Roller Diameter | 10.16 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX | ||||||
| dm | D1 | A | dm | D2 | A | dm | D3 | A | |||
| 8 | 47.0 | 41.48 | 25 | 10 | 25 | 25 | 12 | 40 | 25 | 12 | 55 |
| 9 | 52.6 | 46.42 | 30 | 10 | 25 | 30 | 12 | 40 | 30 | 12 | 55 |
| 10 | 57.5 | 51.37 | 35 | 10 | 25 | 35 | 12 | 40 | 35 | 12 | 55 |
| 11 | 63.0 | 56.34 | 37 | 12 | 30 | 39 | 14 | 40 | 39 | 16 | 55 |
| 12 | 68.0 | 61.34 | 42 | 12 | 30 | 44 | 14 | 40 | 44 | 16 | 55 |
| 13 | 73.0 | 66.32 | 47 | 12 | 30 | 49 | 14 | 40 | 49 | 16 | 55 |
| 14 | 78.0 | 71.34 | 52 | 12 | 30 | 54 | 14 | 40 | 54 | 16 | 55 |
| 15 | 83.0 | 76.36 | 57 | 12 | 30 | 59 | 14 | 40 | 59 | 16 | 55 |
| 16 | 88.0 | 81.37 | 60 | 12 | 30 | 64 | 16 | 45 | 64 | 16 | 60 |
| 17 | 93.0 | 86.39 | 60 | 12 | 30 | 69 | 16 | 45 | 69 | 16 | 60 |
| 18 | 98.3 | 91.42 | 70 | 14 | 30 | 74 | 16 | 45 | 74 | 16 | 60 |
| 19 | 103.3 | 96.45 | 70 | 14 | 30 | 79 | 16 | 45 | 79 | 16 | 60 |
| 20 | 108.4 | 101.49 | 75 | 14 | 30 | 84 | 16 | 45 | 84 | 16 | 60 |
| 21 | 113.4 | 106.52 | 75 | 16 | 30 | 85 | 16 | 45 | 85 | 20 | 60 |
| 22 | 118.0 | 111.55 | 80 | 16 | 30 | 90 | 16 | 45 | 90 | 20 | 60 |
| 23 | 123.5 | 116.58 | 80 | 16 | 30 | 95 | 16 | 45 | 95 | 20 | 60 |
| 24 | 128.3 | 121.62 | 80 | 16 | 30 | 100 | 16 | 45 | 100 | 20 | 60 |
| 25 | 134.0 | 126.66 | 80 | 16 | 30 | 105 | 16 | 45 | 105 | 20 | 60 |
| 26 | 139.0 | 131.70 | 85 | 20 | 35 | 110 | 20 | 45 | 110 | 20 | 60 |
| 27 | 144.0 | 136.75 | 85 | 20 | 35 | 110 | 20 | 45 | 110 | 20 | 60 |
| 28 | 148.7 | 141.78 | 90 | 20 | 35 | 115 | 20 | 45 | 115 | 20 | 60 |
| 29 | 153.8 | 146.83 | 90 | 20 | 35 | 115 | 20 | 45 | 115 | 20 | 60 |
| 30 | 158.8 | 151.87 | 90 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 31 | 163.9 | 156.92 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 32 | 168.9 | 161.95 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 33 | 174.5 | 167.00 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 34 | 179.0 | 172.05 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 35 | 184.1 | 177.10 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 36 | 189.1 | 182.15 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 37 | 194.2 | 187.20 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 38 | 199.2 | 192.24 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 39 | 204.2 | 197.29 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 40 | 209.3 | 202.34 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 41 | 214.8 | 207.38 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 42 | 2,199 | 212.43 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 43 | 224.9 | 217.48 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 44 | 230.0 | 222.53 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 45 | 235.0 | 227.58 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 46 | 240.1 | 232.63 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 47 | 245.1 | 237.68 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 48 | 250.2 | 242.73 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 49 | 255.2 | 247.78 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 50 | 260.3 | 252.82 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 51 | 265.3 | 257.87 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 52 | 270.4 | 262.92 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 53 | 275.4 | 267.97 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 54 | 280.5 | 273.03 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 55 | 285.5 | 278.08 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 56 | 290.6 | 283.13 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 57 | 296.0 | 288.18 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 58 | 300.7 | 293.23 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 59 | 305.7 | 298.28 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 60 | 310.8 | 303.33 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 62 | 321.4 | 313.43 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 64 | 331.5 | 323.53 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 65 | 336.5 | 328.58 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 66 | 341.6 | 333.64 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 68 | 351.7 | 343.74 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 70 | 361.8 | 353.84 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 72 | 371.9 | 363.94 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 75 | 387.1 | 379.10 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 76 | 392.1 | 384.15 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 78 | 402.2 | 394.25 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 80 | 412.3 | 404.36 | *100 | 20 | 43 | *130 | 20 | 57 | *130 | 25 | 67 |
| 85 | 437.6 | 429.62 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 90 | 462.8 | 454.88 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 95 | 488.5 | 480.14 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 100 | 513.4 | 505.40 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 110 | 563.9 | 555.92 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 114 | 584.1 | 576.13 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 120 | 614.4 | 606.45 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 125 | 639.7 | 631.51 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
Notice: *welding hub
BASIC INFO.
| Product name | DIN ISO Standard Sprocket for Roller Chain |
| Materials Available | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| Surface Treatment | Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Size | Customer Drawings & ISO standard |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
| Certificate | ISO9001: 2008 |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 20 days for samples. 45 days for official order. |
INSTALLATION AND USING
The chain spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard Or Nonstandard: | Standard, Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Motorcycle, Machinery, Marine, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear, Cut Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | 1045, Stainless Steel |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain’s components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer’s guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
Can sprocket gears be used in high-temperature environments?
Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.
High-temperature environments can pose several challenges to sprocket gears, including:
- Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
- Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
- Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.
To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.
Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.
Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.
In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.
editor by CX 2023-08-15
China 12 meter stainless steel Cooling Flat Flex wire mesh belt conveyor belts food grade for breadmaker chain sprocket
Substance: STAINLESS Metal WIRE, 310s, 304, 316 and so forth
Kind: Weave Wire Mesh
Application: conveyor belt
Weave Fashion: Basic Weave
Method: woven
Product Variety: SGK-CB01
Supply Time: 8-fourteen times
Merchandise title: Conveyor belt
Width: 20cm-200cm
Duration: 20m
Pitch: 4mm-20mm
Wire diameter: customization
MOQ: 2 Sq. Meters
Advantage: wealthy expertise
Edge: weave ,welded
Packing: By crate
Packaging Specifics: Foods Processing 10mm pitch metallic Wire Mesh Conveyor belt Chain mesh 1)Inside of by waterproof paper 2)Outside by crate
Port: ZheJiang port, ZheJiang port, HangZhou port
Z type conveyor belt
Metal conveyor belt mesh, Substantial Top quality Tollok locking assembly keyless shaft hub locking unit adjustable protection Coupling Company stainless metal conveyor are created of stainless metal wire of spring wire. Wire diameters may differ from 1mm till 3.2mm. Pitches from 4 mm until 20mm, and belt widths from ten mm right up until 3 metre.
| Wire diameter: 2.0mmSpiral pitch: 100mmRod pitch: 7mmWidth: 300mm(3 spiral pitch)Weight: 1kg/mWidth: 400mm(4 spiral pitch)Bodyweight: 1.4kg/mMaterials:Stainless steel wire 304, 316 310s etcmesh belt width: a hundred and fifty-5500mmoperating temperature: -40℃-1200℃ | ||||||||
| Custom-produced is acceptable. | ||||||||
Weaving and attributes: Conveyor belt can be made into different types, including chain url variety belt mesh, balanced weave, reinforced and other kinds offering diverse mesh opening and characteristics.Makes use of: Conveyor belt mesh is utilized broadly in warmth condition, foodstuff processing, pharmacy, glass printing and some special equipments.
Single loop
Double loop
Items Demonstrate Detailed Pictures FeatureEasy to thoroughly clean, Coupling Maker Substantial Good quality JQ-35 clamping coupling Manufacturing unit Price tag Large efficiency shaft connector non-normal dimensions clean-in-spot designNo-slip, good driveVery minimal belt massSmallest diameter stop rolls and generate rolls
ApplicationDrying Cooling Heating Draining Coating Glazing
Flat flex conveyor belt for pizza
Flat conveyor belt in foodstuff processing
Flat conveyor belt for transporting
Flat conveyor belt with patty
Packing & Supply 30-50m per roll Exterior by plastic movie Then packed by crate
We can do for you: 1, Offer you you higher high quality goods2, Supply you reasonable price3, Provide you very best price4, Enable you know the standing of your put purchase
Connected Products Chain link conveyor belt
honeycomb belt
Flat wire conveyor belt
Hi pricey, welcome to visit our internet, if interested in our items, Vershal C2-1 Glow In The Darkish Dragon Texture Male Silver Ring Sprucing Stainless Metal Ring Gentleman you should ship us merchandise name and pictures, our quotation will be sent to you in accordance.
MOQ: 10m
FAQ Please allow us know:
a. wire diameter b. spiral pitch c. rod diameter d. rod pitch e. overall width of the line f. duration
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by Cx 2023-06-27
China Automatic Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains Custom CNC Machining Steel Sprocket bike chain sprocket
Item Description
SPROCKET 5/8” X 3/8” 10B Sequence SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | sixteen.0mm | ||||
| Radius Width C | one.6mm | ||||
| Tooth Width b1 | 9.0mm | ||||
| Tooth Width B1 | 9.1mm | ||||
| Tooth Width B2 | 25.5mm | ||||
| Tooth Width B3 | 42.1mm | ||||
| 10B Sequence ROLLER CHAINS | |||||
| Pitch | fifteen.875 mm | ||||
| Internal Width | nine.sixty five mm | ||||
| Roller Diameter | ten.16 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | forty seven. | forty one.48 | 10 | ten | 12 |
| 9 | 52.six | forty six.forty two | ten | ten | twelve |
| ten | 57.5 | 51.37 | ten | ten | twelve |
| 11 | 63. | 56.34 | 10 | 10 | 12 |
| twelve | 68. | 61.34 | 10 | 10 | 12 |
| thirteen | 73. | sixty six.32 | ten | ten | twelve |
| fourteen | seventy eight. | 71.34 | ten | ten | twelve |
| fifteen | eighty three. | 76.36 | ten | ten | twelve |
| sixteen | 88. | 81.37 | twelve | 12 | 16 |
| seventeen | ninety three. | 86.39 | twelve | twelve | 16 |
| 18 | 98.3 | ninety one.42 | 12 | 12 | sixteen |
| 19 | 103.3 | 96.45 | 12 | 12 | 16 |
| 20 | 108.4 | 101.49 | twelve | twelve | 16 |
| 21 | 113.4 | 106.52 | 12 | 16 | 16 |
| 22 | 118. | 111.fifty five | twelve | sixteen | sixteen |
| 23 | 123.5 | 116.58 | 12 | 16 | 16 |
| 24 | 128.three | 121.sixty two | 12 | sixteen | sixteen |
| 25 | 134. | 126.66 | 12 | 16 | sixteen |
| 26 | 139. | 131.70 | 16 | sixteen | 20 |
| 27 | one hundred forty four. | 136.75 | 16 | 16 | 20 |
| 28 | 148.7 | 141.seventy eight | sixteen | sixteen | twenty |
| 29 | 153.eight | 146.83 | 16 | 16 | twenty |
| 30 | 158.8 | 151.87 | sixteen | 16 | twenty |
| 31 | 163.9 | 156.ninety two | sixteen | twenty | twenty |
| 32 | 168.9 | 161.ninety five | 16 | 20 | 20 |
| 33 | 174.5 | 167.00 | 16 | 20 | twenty |
| 34 | 179. | 172.05 | sixteen | 20 | 20 |
| 35 | 184.one | 177.ten | 16 | twenty | 20 |
| 36 | 189.one | 182.15 | twenty | 20 | twenty five |
| 37 | 194.two | 187.20 | twenty | 20 | twenty five |
| 38 | 199.2 | 192.24 | 20 | 20 | 25 |
| 39 | 204.2 | 197.29 | twenty | 20 | 25 |
| 40 | 209.3 | 202.34 | twenty | 20 | 25 |
| 41 | 214.8 | 207.38 | twenty | twenty | 25 |
| forty two | two,199 | 212.43 | twenty | twenty | 25 |
| forty three | 224.nine | 217.forty eight | 20 | 20 | twenty five |
| 44 | 230. | 222.53 | twenty | twenty | twenty five |
| 45 | 235. | 227.58 | 20 | twenty | 25 |
| 46 | 240.one | 232.63 | 20 | 25 | 25 |
| forty seven | 245.1 | 237.sixty eight | twenty | 25 | twenty five |
| 48 | 250.two | 242.73 | 20 | twenty five | 25 |
| 49 | 255.2 | 247.78 | 20 | twenty five | 25 |
| fifty | 260.3 | 252.82 | 20 | twenty five | 25 |
| 51 | 265.3 | 257.87 | twenty | 25 | twenty five |
| 52 | 270.4 | 262.ninety two | 20 | 25 | 25 |
| 53 | 275.4 | 267.ninety seven | 20 | 25 | twenty five |
| 54 | 280.5 | 273.03 | 20 | twenty five | twenty five |
| 55 | 285.5 | 278.08 | 20 | 25 | twenty five |
| 56 | 290.6 | 283.13 | twenty five | twenty five | twenty five |
| 57 | 296. | 288.eighteen | twenty five | twenty five | twenty five |
| fifty eight | three hundred.7 | 293.23 | twenty five | twenty five | 25 |
| fifty nine | 305.seven | 298.28 | twenty five | twenty five | twenty five |
| 60 | 310.8 | 303.33 | twenty five | twenty five | twenty five |
| sixty two | 321.four | 313.43 | 25 | twenty five | thirty |
| 64 | 331.five | 323.fifty three | 25 | twenty five | thirty |
| 65 | 336.5 | 328.58 | twenty five | 25 | thirty |
| sixty six | 341.6 | 333.sixty four | 25 | 25 | thirty |
| sixty eight | 351.seven | 343.74 | 25 | 25 | thirty |
| 70 | 361.eight | 353.eighty four | 25 | 25 | 30 |
| seventy two | 371.9 | 363.94 | twenty five | 25 | thirty |
| seventy five | 387.1 | 379.10 | twenty five | twenty five | thirty |
| 76 | 392.1 | 384.fifteen | twenty five | 25 | 30 |
| 78 | 402.two | 394.twenty five | 25 | 25 | thirty |
| eighty | 412.three | 404.36 | 25 | 25 | thirty |
| 85 | 437.six | 429.sixty two | 25 | 30 | 30 |
| 90 | 462.eight | 454.88 | 25 | thirty | thirty |
| 95 | 488.five | 480.fourteen | twenty five | thirty | 30 |
| one hundred | 513.4 | 505.forty | twenty five | thirty | thirty |
| 110 | 563.nine | 555.ninety two | 25 | 30 | thirty |
| 114 | 584.one | 576.13 | twenty five | 30 | 30 |
| 120 | 614.4 | 606.45 | 25 | thirty | 30 |
| one hundred twenty five | 639.seven | 631.fifty one | twenty five | 30 | 30 |
Fundamental Info.
| Product name | DIN ISO Regular Sprocket for Roller Chain |
| Materials Available | one. Stainless Steel: SS304, SS316, and so on |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, and so forth | |
| three. OEM according to your request | |
| Floor Therapy | Heat therapy, Quenching treatment, Substantial frequency normalizing treatment method, Sprucing, Electrophoresis paint processing, Anodic oxidation therapy, and many others |
| Attribute | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, and so on |
| Design criterion | ISO DIN ANSI & Client Drawings |
| Dimensions | Consumer Drawings & ISO standard |
| Software | Industrial transmission products |
| Bundle | Picket Scenario / Container and pallet, or created-to-buy |
| Certification | ISO9001: 2008 |
| Gain | Good quality 1st, Provider 1st, Competitive price tag, Rapidly shipping |
| Shipping and delivery Time | 20 days for samples. 45 days for official order. |
Installation AND Employing
The chain spoket, as a generate or deflection for chains, has pockets to hold the chain links with a D-profile cross segment with flat facet surfaces parallel to the centre aircraft of the chain backlinks, and outer surfaces at correct angles to the chain link centre plane. The chain links are pressed firmly in opposition to the outer surfaces and every single of the aspect surfaces by the angled laying surfaces at the foundation of the pockets, and also the help surfaces of the wheel human body with each other with the end sides of the webs fashioned by the foremost and trailing partitions of the pocket.
Recognize
When fitting new chainwheels it is really critical that a new chain is equipped at the same time, and vice versa. Employing an previous chain with new sprockets, or a new chain with outdated sprockets will trigger quick put on.
It is essential if you are setting up the chainwheels oneself to have the factory service manual specific to your model. Our chainwheels are created to be a direct replacement for your OEM chainwheels and as this kind of, the set up should be carried out in accordance to your designs service guide.
In the course of use a chain will stretch (i.e. the pins will use triggering extension of the chain). Making use of a chain which has been stretched more than the earlier mentioned optimum allowance brings about the chain to experience up the teeth of the sprocket. This leads to hurt to the guidelines of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely by way of the best of the tooth, instead than the whole tooth. This results in significant wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Requirements corporations (this kind of as ANSI and ISO) keep expectations for layout, dimensions, and interchangeability of transmission chains. For illustration, the subsequent Table displays info from ANSI common B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Culture of Mechanical Engineers (ASME). See the references[8][9][10] for additional data.
ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Supreme Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Dimensions | ||||
| Size | Pitch | Highest Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | .250 in (6.35 mm) | .a hundred thirty in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | .375 in (9.fifty three mm) | .two hundred in (5.08 mm) | one,760 lb (800 kg) | eighteen lb (8.2 kg) |
| forty one | .five hundred in (twelve.70 mm) | .306 in (7.seventy seven mm) | one,500 lb (680 kg) | eighteen lb (8.2 kg) |
| forty | .five hundred in (twelve.70 mm) | .312 in (7.ninety two mm) | three,a hundred twenty five lb (1,417 kg) | 31 lb (fourteen kg) |
| fifty | .625 in (fifteen.88 mm) | .400 in (10.sixteen mm) | four,880 lb (2,210 kg) | forty nine lb (22 kg) |
| 60 | .750 in (19.05 mm) | .469 in (eleven.ninety one mm) | seven,030 lb (3,a hundred ninety kg) | 70 lb (32 kg) |
| eighty | 1.000 in (25.40 mm) | .625 in (15.88 mm) | twelve,500 lb (5,seven-hundred kg) | 125 lb (57 kg) |
| a hundred | one.250 in (31.seventy five mm) | .750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.ten mm) | .875 in (22.23 mm) | 28,a hundred twenty five lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (forty four.forty five mm) | 1.000 in (25.forty mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| one hundred sixty | two.000 in (fifty.80 mm) | 1.one hundred twenty five in (28.fifty eight mm) | fifty,000 lb (23,000 kg) | 500 lb (230 kg) |
| a hundred and eighty | two.250 in (57.15 mm) | 1.460 in (37.08 mm) | sixty three,280 lb (28,seven hundred kg) | 633 lb (287 kg) |
| 200 | two.500 in (sixty three.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (seventy six.twenty mm) | one.875 in (forty seven.63 mm) | 112,500 lb (51,000 kg) | one,000 lb (450 kg |
For mnemonic reasons, below is another presentation of important proportions from the exact same common, expressed in fractions of an inch (which was component of the pondering guiding the decision of chosen numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI normal chain quantity |
Width (inches) |
|---|---|---|---|
| one⁄4 | 2⁄8 | 25 | 1⁄8 |
| three⁄8 | 3⁄8 | three5 | three⁄16 |
| 1⁄2 | 4⁄eight | four1 | 1⁄four |
| 1⁄two | four⁄eight | four | 5⁄16 |
| 5⁄eight | five⁄eight | five | 3⁄8 |
| three⁄four | 6⁄8 | 6 | 1⁄2 |
| one | eight⁄eight | 8 | 5⁄8 |
Notes:
one. The pitch is the length between roller centers. The width is the distance in between the hyperlink plates (i.e. a bit much more than the roller width to let for clearance).
two. The appropriate-hand digit of the common denotes 0 = regular chain, 1 = light-weight chain, 5 = rollerless bushing chain.
3. The still left-hand digit denotes the number of eighths of an inch that make up the pitch.
four. An “H” subsequent the regular amount denotes heavyweight chain. A hyphenated quantity following the standard number denotes double-strand (2), triple-strand (3), and so on. As a result 60H-3 denotes number sixty heavyweight triple-strand chain.
A standard bicycle chain (for derailleur gears) utilizes slim 1⁄2-inch-pitch chain. The width of the chain is variable, and does not influence the load potential. The far more sprockets at the rear wheel (historically 3-6, presently 7-12 sprockets), the narrower the chain. Chains are offered according to the quantity of speeds they are created to work with, for instance, “10 pace chain”. Hub gear or solitary speed bicycles use 1/2″ x 1/8″ chains, exactly where 1/8″ refers to the optimum thickness of a sprocket that can be utilised with the chain.
Usually chains with parallel shaped back links have an even quantity of hyperlinks, with each slim hyperlink followed by a broad a single. Chains created up with a uniform kind of hyperlink, narrow at 1 and wide at the other finish, can be created with an odd number of backlinks, which can be an gain to adapt to a special chainwheel-distance on the other aspect this kind of a chain tends to be not so powerful.
Roller chains manufactured using ISO standard are at times named as isochains.
WHY Choose US
1. Trustworthy Top quality Assurance Program
two. Chopping-Edge Computer-Controlled CNC Devices
3. Bespoke Options from Highly Seasoned Specialists
four. Customization and OEM Accessible for Certain Application
five. In depth Inventory of Spare Parts and Accessories
6. Effectively-Created Throughout the world Marketing and advertising Community
seven. Successful Following-Sale Support System
The 219 sets of superior automatic production gear supply guarantees for high item high quality. The 167 engineers and specialists with senior specialist titles can style and build items to meet the precise demands of customers, and OEM customizations are also offered with us. Our audio worldwide service network can give buyers with well timed after-income specialized companies.
We are not just a producer and supplier, but also an business advisor. We perform pro-actively with you to offer professional tips and solution recommendations in buy to finish up with a most value successful solution obtainable for your certain application. The consumers we provide around the world variety from stop consumers to distributors and OEMs. Our OEM replacements can be substituted wherever needed and appropriate for both repair and new assemblies.
|
US $1.1 / Piece | |
1,000 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear, Cut Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Q235, Brass, Alloy |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 16.0mm | ||||
| Radius Width C | 1.6mm | ||||
| Tooth Width b1 | 9.0mm | ||||
| Tooth Width B1 | 9.1mm | ||||
| Tooth Width B2 | 25.5mm | ||||
| Tooth Width B3 | 42.1mm | ||||
| 10B SERIES ROLLER CHAINS | |||||
| Pitch | 15.875 mm | ||||
| Internal Width | 9.65 mm | ||||
| Roller Diameter | 10.16 mm | ||||
###
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 47.0 | 41.48 | 10 | 10 | 12 |
| 9 | 52.6 | 46.42 | 10 | 10 | 12 |
| 10 | 57.5 | 51.37 | 10 | 10 | 12 |
| 11 | 63.0 | 56.34 | 10 | 10 | 12 |
| 12 | 68.0 | 61.34 | 10 | 10 | 12 |
| 13 | 73.0 | 66.32 | 10 | 10 | 12 |
| 14 | 78.0 | 71.34 | 10 | 10 | 12 |
| 15 | 83.0 | 76.36 | 10 | 10 | 12 |
| 16 | 88.0 | 81.37 | 12 | 12 | 16 |
| 17 | 93.0 | 86.39 | 12 | 12 | 16 |
| 18 | 98.3 | 91.42 | 12 | 12 | 16 |
| 19 | 103.3 | 96.45 | 12 | 12 | 16 |
| 20 | 108.4 | 101.49 | 12 | 12 | 16 |
| 21 | 113.4 | 106.52 | 12 | 16 | 16 |
| 22 | 118.0 | 111.55 | 12 | 16 | 16 |
| 23 | 123.5 | 116.58 | 12 | 16 | 16 |
| 24 | 128.3 | 121.62 | 12 | 16 | 16 |
| 25 | 134.0 | 126.66 | 12 | 16 | 16 |
| 26 | 139.0 | 131.70 | 16 | 16 | 20 |
| 27 | 144.0 | 136.75 | 16 | 16 | 20 |
| 28 | 148.7 | 141.78 | 16 | 16 | 20 |
| 29 | 153.8 | 146.83 | 16 | 16 | 20 |
| 30 | 158.8 | 151.87 | 16 | 16 | 20 |
| 31 | 163.9 | 156.92 | 16 | 20 | 20 |
| 32 | 168.9 | 161.95 | 16 | 20 | 20 |
| 33 | 174.5 | 167.00 | 16 | 20 | 20 |
| 34 | 179.0 | 172.05 | 16 | 20 | 20 |
| 35 | 184.1 | 177.10 | 16 | 20 | 20 |
| 36 | 189.1 | 182.15 | 20 | 20 | 25 |
| 37 | 194.2 | 187.20 | 20 | 20 | 25 |
| 38 | 199.2 | 192.24 | 20 | 20 | 25 |
| 39 | 204.2 | 197.29 | 20 | 20 | 25 |
| 40 | 209.3 | 202.34 | 20 | 20 | 25 |
| 41 | 214.8 | 207.38 | 20 | 20 | 25 |
| 42 | 2,199 | 212.43 | 20 | 20 | 25 |
| 43 | 224.9 | 217.48 | 20 | 20 | 25 |
| 44 | 230.0 | 222.53 | 20 | 20 | 25 |
| 45 | 235.0 | 227.58 | 20 | 20 | 25 |
| 46 | 240.1 | 232.63 | 20 | 25 | 25 |
| 47 | 245.1 | 237.68 | 20 | 25 | 25 |
| 48 | 250.2 | 242.73 | 20 | 25 | 25 |
| 49 | 255.2 | 247.78 | 20 | 25 | 25 |
| 50 | 260.3 | 252.82 | 20 | 25 | 25 |
| 51 | 265.3 | 257.87 | 20 | 25 | 25 |
| 52 | 270.4 | 262.92 | 20 | 25 | 25 |
| 53 | 275.4 | 267.97 | 20 | 25 | 25 |
| 54 | 280.5 | 273.03 | 20 | 25 | 25 |
| 55 | 285.5 | 278.08 | 20 | 25 | 25 |
| 56 | 290.6 | 283.13 | 25 | 25 | 25 |
| 57 | 296.0 | 288.18 | 25 | 25 | 25 |
| 58 | 300.7 | 293.23 | 25 | 25 | 25 |
| 59 | 305.7 | 298.28 | 25 | 25 | 25 |
| 60 | 310.8 | 303.33 | 25 | 25 | 25 |
| 62 | 321.4 | 313.43 | 25 | 25 | 30 |
| 64 | 331.5 | 323.53 | 25 | 25 | 30 |
| 65 | 336.5 | 328.58 | 25 | 25 | 30 |
| 66 | 341.6 | 333.64 | 25 | 25 | 30 |
| 68 | 351.7 | 343.74 | 25 | 25 | 30 |
| 70 | 361.8 | 353.84 | 25 | 25 | 30 |
| 72 | 371.9 | 363.94 | 25 | 25 | 30 |
| 75 | 387.1 | 379.10 | 25 | 25 | 30 |
| 76 | 392.1 | 384.15 | 25 | 25 | 30 |
| 78 | 402.2 | 394.25 | 25 | 25 | 30 |
| 80 | 412.3 | 404.36 | 25 | 25 | 30 |
| 85 | 437.6 | 429.62 | 25 | 30 | 30 |
| 90 | 462.8 | 454.88 | 25 | 30 | 30 |
| 95 | 488.5 | 480.14 | 25 | 30 | 30 |
| 100 | 513.4 | 505.40 | 25 | 30 | 30 |
| 110 | 563.9 | 555.92 | 25 | 30 | 30 |
| 114 | 584.1 | 576.13 | 25 | 30 | 30 |
| 120 | 614.4 | 606.45 | 25 | 30 | 30 |
| 125 | 639.7 | 631.51 | 25 | 30 | 30 |
###
| Product name | DIN ISO Standard Sprocket for Roller Chain |
| Materials Available | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| Surface Treatment | Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Size | Customer Drawings & ISO standard |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
| Certificate | ISO9001: 2008 |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 20 days for samples. 45 days for official order. |
###
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
###
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
|
US $1.1 / Piece | |
1,000 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear, Cut Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Q235, Brass, Alloy |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 16.0mm | ||||
| Radius Width C | 1.6mm | ||||
| Tooth Width b1 | 9.0mm | ||||
| Tooth Width B1 | 9.1mm | ||||
| Tooth Width B2 | 25.5mm | ||||
| Tooth Width B3 | 42.1mm | ||||
| 10B SERIES ROLLER CHAINS | |||||
| Pitch | 15.875 mm | ||||
| Internal Width | 9.65 mm | ||||
| Roller Diameter | 10.16 mm | ||||
###
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX |
| D1 | D2 | D3 | |||
| 8 | 47.0 | 41.48 | 10 | 10 | 12 |
| 9 | 52.6 | 46.42 | 10 | 10 | 12 |
| 10 | 57.5 | 51.37 | 10 | 10 | 12 |
| 11 | 63.0 | 56.34 | 10 | 10 | 12 |
| 12 | 68.0 | 61.34 | 10 | 10 | 12 |
| 13 | 73.0 | 66.32 | 10 | 10 | 12 |
| 14 | 78.0 | 71.34 | 10 | 10 | 12 |
| 15 | 83.0 | 76.36 | 10 | 10 | 12 |
| 16 | 88.0 | 81.37 | 12 | 12 | 16 |
| 17 | 93.0 | 86.39 | 12 | 12 | 16 |
| 18 | 98.3 | 91.42 | 12 | 12 | 16 |
| 19 | 103.3 | 96.45 | 12 | 12 | 16 |
| 20 | 108.4 | 101.49 | 12 | 12 | 16 |
| 21 | 113.4 | 106.52 | 12 | 16 | 16 |
| 22 | 118.0 | 111.55 | 12 | 16 | 16 |
| 23 | 123.5 | 116.58 | 12 | 16 | 16 |
| 24 | 128.3 | 121.62 | 12 | 16 | 16 |
| 25 | 134.0 | 126.66 | 12 | 16 | 16 |
| 26 | 139.0 | 131.70 | 16 | 16 | 20 |
| 27 | 144.0 | 136.75 | 16 | 16 | 20 |
| 28 | 148.7 | 141.78 | 16 | 16 | 20 |
| 29 | 153.8 | 146.83 | 16 | 16 | 20 |
| 30 | 158.8 | 151.87 | 16 | 16 | 20 |
| 31 | 163.9 | 156.92 | 16 | 20 | 20 |
| 32 | 168.9 | 161.95 | 16 | 20 | 20 |
| 33 | 174.5 | 167.00 | 16 | 20 | 20 |
| 34 | 179.0 | 172.05 | 16 | 20 | 20 |
| 35 | 184.1 | 177.10 | 16 | 20 | 20 |
| 36 | 189.1 | 182.15 | 20 | 20 | 25 |
| 37 | 194.2 | 187.20 | 20 | 20 | 25 |
| 38 | 199.2 | 192.24 | 20 | 20 | 25 |
| 39 | 204.2 | 197.29 | 20 | 20 | 25 |
| 40 | 209.3 | 202.34 | 20 | 20 | 25 |
| 41 | 214.8 | 207.38 | 20 | 20 | 25 |
| 42 | 2,199 | 212.43 | 20 | 20 | 25 |
| 43 | 224.9 | 217.48 | 20 | 20 | 25 |
| 44 | 230.0 | 222.53 | 20 | 20 | 25 |
| 45 | 235.0 | 227.58 | 20 | 20 | 25 |
| 46 | 240.1 | 232.63 | 20 | 25 | 25 |
| 47 | 245.1 | 237.68 | 20 | 25 | 25 |
| 48 | 250.2 | 242.73 | 20 | 25 | 25 |
| 49 | 255.2 | 247.78 | 20 | 25 | 25 |
| 50 | 260.3 | 252.82 | 20 | 25 | 25 |
| 51 | 265.3 | 257.87 | 20 | 25 | 25 |
| 52 | 270.4 | 262.92 | 20 | 25 | 25 |
| 53 | 275.4 | 267.97 | 20 | 25 | 25 |
| 54 | 280.5 | 273.03 | 20 | 25 | 25 |
| 55 | 285.5 | 278.08 | 20 | 25 | 25 |
| 56 | 290.6 | 283.13 | 25 | 25 | 25 |
| 57 | 296.0 | 288.18 | 25 | 25 | 25 |
| 58 | 300.7 | 293.23 | 25 | 25 | 25 |
| 59 | 305.7 | 298.28 | 25 | 25 | 25 |
| 60 | 310.8 | 303.33 | 25 | 25 | 25 |
| 62 | 321.4 | 313.43 | 25 | 25 | 30 |
| 64 | 331.5 | 323.53 | 25 | 25 | 30 |
| 65 | 336.5 | 328.58 | 25 | 25 | 30 |
| 66 | 341.6 | 333.64 | 25 | 25 | 30 |
| 68 | 351.7 | 343.74 | 25 | 25 | 30 |
| 70 | 361.8 | 353.84 | 25 | 25 | 30 |
| 72 | 371.9 | 363.94 | 25 | 25 | 30 |
| 75 | 387.1 | 379.10 | 25 | 25 | 30 |
| 76 | 392.1 | 384.15 | 25 | 25 | 30 |
| 78 | 402.2 | 394.25 | 25 | 25 | 30 |
| 80 | 412.3 | 404.36 | 25 | 25 | 30 |
| 85 | 437.6 | 429.62 | 25 | 30 | 30 |
| 90 | 462.8 | 454.88 | 25 | 30 | 30 |
| 95 | 488.5 | 480.14 | 25 | 30 | 30 |
| 100 | 513.4 | 505.40 | 25 | 30 | 30 |
| 110 | 563.9 | 555.92 | 25 | 30 | 30 |
| 114 | 584.1 | 576.13 | 25 | 30 | 30 |
| 120 | 614.4 | 606.45 | 25 | 30 | 30 |
| 125 | 639.7 | 631.51 | 25 | 30 | 30 |
###
| Product name | DIN ISO Standard Sprocket for Roller Chain |
| Materials Available | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| Surface Treatment | Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Size | Customer Drawings & ISO standard |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
| Certificate | ISO9001: 2008 |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 20 days for samples. 45 days for official order. |
###
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
###
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
What you need to know about sprockets
If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
Various types of sprockets
There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
teeth
There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.
Hole
Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
asphalt
Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.
editor by czh 2023-01-05