Product Description
SPROCKET 5/8” X 3/8” 10B SERIES SPROCKETS
| For Chain Acc.to DIN8187 ISO/R 606 | |||||
| Tooth Radius r3 | 16.0mm | ||||
| Radius Width C | 1.6mm | ||||
| Tooth Width b1 | 9.0mm | ||||
| Tooth Width B1 | 9.1mm | ||||
| Tooth Width B2 | 25.5mm | ||||
| Tooth Width B3 | 42.1mm | ||||
| 10B SERIES ROLLER CHAINS | |||||
| Pitch | 15.875 mm | ||||
| Internal Width | 9.65 mm | ||||
| Roller Diameter | 10.16 mm | ||||
| Z | de | dp | SIMPLEX | DUPLEX | TRIPLEX | ||||||
| dm | D1 | A | dm | D2 | A | dm | D3 | A | |||
| 8 | 47.0 | 41.48 | 25 | 10 | 25 | 25 | 12 | 40 | 25 | 12 | 55 |
| 9 | 52.6 | 46.42 | 30 | 10 | 25 | 30 | 12 | 40 | 30 | 12 | 55 |
| 10 | 57.5 | 51.37 | 35 | 10 | 25 | 35 | 12 | 40 | 35 | 12 | 55 |
| 11 | 63.0 | 56.34 | 37 | 12 | 30 | 39 | 14 | 40 | 39 | 16 | 55 |
| 12 | 68.0 | 61.34 | 42 | 12 | 30 | 44 | 14 | 40 | 44 | 16 | 55 |
| 13 | 73.0 | 66.32 | 47 | 12 | 30 | 49 | 14 | 40 | 49 | 16 | 55 |
| 14 | 78.0 | 71.34 | 52 | 12 | 30 | 54 | 14 | 40 | 54 | 16 | 55 |
| 15 | 83.0 | 76.36 | 57 | 12 | 30 | 59 | 14 | 40 | 59 | 16 | 55 |
| 16 | 88.0 | 81.37 | 60 | 12 | 30 | 64 | 16 | 45 | 64 | 16 | 60 |
| 17 | 93.0 | 86.39 | 60 | 12 | 30 | 69 | 16 | 45 | 69 | 16 | 60 |
| 18 | 98.3 | 91.42 | 70 | 14 | 30 | 74 | 16 | 45 | 74 | 16 | 60 |
| 19 | 103.3 | 96.45 | 70 | 14 | 30 | 79 | 16 | 45 | 79 | 16 | 60 |
| 20 | 108.4 | 101.49 | 75 | 14 | 30 | 84 | 16 | 45 | 84 | 16 | 60 |
| 21 | 113.4 | 106.52 | 75 | 16 | 30 | 85 | 16 | 45 | 85 | 20 | 60 |
| 22 | 118.0 | 111.55 | 80 | 16 | 30 | 90 | 16 | 45 | 90 | 20 | 60 |
| 23 | 123.5 | 116.58 | 80 | 16 | 30 | 95 | 16 | 45 | 95 | 20 | 60 |
| 24 | 128.3 | 121.62 | 80 | 16 | 30 | 100 | 16 | 45 | 100 | 20 | 60 |
| 25 | 134.0 | 126.66 | 80 | 16 | 30 | 105 | 16 | 45 | 105 | 20 | 60 |
| 26 | 139.0 | 131.70 | 85 | 20 | 35 | 110 | 20 | 45 | 110 | 20 | 60 |
| 27 | 144.0 | 136.75 | 85 | 20 | 35 | 110 | 20 | 45 | 110 | 20 | 60 |
| 28 | 148.7 | 141.78 | 90 | 20 | 35 | 115 | 20 | 45 | 115 | 20 | 60 |
| 29 | 153.8 | 146.83 | 90 | 20 | 35 | 115 | 20 | 45 | 115 | 20 | 60 |
| 30 | 158.8 | 151.87 | 90 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 31 | 163.9 | 156.92 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 32 | 168.9 | 161.95 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 33 | 174.5 | 167.00 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 34 | 179.0 | 172.05 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 35 | 184.1 | 177.10 | 95 | 20 | 35 | 120 | 20 | 45 | 120 | 20 | 60 |
| 36 | 189.1 | 182.15 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 37 | 194.2 | 187.20 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 38 | 199.2 | 192.24 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 39 | 204.2 | 197.29 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 40 | 209.3 | 202.34 | 100 | 20 | 35 | 120 | 20 | 45 | 120 | 25 | 60 |
| 41 | 214.8 | 207.38 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 42 | 2,199 | 212.43 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 43 | 224.9 | 217.48 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 44 | 230.0 | 222.53 | *100 | 20 | 40 | 120 | 20 | 50 | *130 | 25 | 60 |
| 45 | 235.0 | 227.58 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 46 | 240.1 | 232.63 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 47 | 245.1 | 237.68 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 48 | 250.2 | 242.73 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 49 | 255.2 | 247.78 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 50 | 260.3 | 252.82 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 51 | 265.3 | 257.87 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 52 | 270.4 | 262.92 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 53 | 275.4 | 267.97 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 54 | 280.5 | 273.03 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 55 | 285.5 | 278.08 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 56 | 290.6 | 283.13 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 57 | 296.0 | 288.18 | *100 | 20 | 40 | *120 | 20 | 50 | *130 | 25 | 60 |
| 58 | 300.7 | 293.23 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 59 | 305.7 | 298.28 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 60 | 310.8 | 303.33 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 62 | 321.4 | 313.43 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 64 |
| 64 | 331.5 | 323.53 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 65 | 336.5 | 328.58 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 66 | 341.6 | 333.64 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 68 | 351.7 | 343.74 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 70 | 361.8 | 353.84 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 72 | 371.9 | 363.94 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 75 | 387.1 | 379.10 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 76 | 392.1 | 384.15 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 78 | 402.2 | 394.25 | *100 | 20 | 43 | *120 | 20 | 57 | *130 | 25 | 67 |
| 80 | 412.3 | 404.36 | *100 | 20 | 43 | *130 | 20 | 57 | *130 | 25 | 67 |
| 85 | 437.6 | 429.62 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 90 | 462.8 | 454.88 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 95 | 488.5 | 480.14 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 100 | 513.4 | 505.40 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 110 | 563.9 | 555.92 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 114 | 584.1 | 576.13 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 120 | 614.4 | 606.45 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
| 125 | 639.7 | 631.51 | *100 | 20 | 50 | *130 | 20 | 58 | *130 | 25 | 67 |
Notice: *welding hub
BASIC INFO.
| Product name | DIN ISO Standard Sprocket for Roller Chain |
| Materials Available | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| Surface Treatment | Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc |
| Characteristic | Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc |
| Design criterion | ISO DIN ANSI & Customer Drawings |
| Size | Customer Drawings & ISO standard |
| Application | Industrial transmission equipment |
| Package | Wooden Case / Container and pallet, or made-to-order |
| Certificate | ISO9001: 2008 |
| Advantage | Quality first, Service first, Competitive price, Fast delivery |
| Delivery Time | 20 days for samples. 45 days for official order. |
INSTALLATION AND USING
The chain spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.
NOTICE
When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.
It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.
During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
FOR CHAIN STHangZhouRDS
Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.
ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
| ASME/ANSI B29.1-2011 Roller Chain Standard Sizes | ||||
| Size | Pitch | Maximum Roller Diameter | Minimum Ultimate Tensile Strength | Measuring Load |
|---|---|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) | 780 lb (350 kg) | 18 lb (8.2 kg) |
| 35 | 0.375 in (9.53 mm) | 0.200 in (5.08 mm) | 1,760 lb (800 kg) | 18 lb (8.2 kg) |
| 41 | 0.500 in (12.70 mm) | 0.306 in (7.77 mm) | 1,500 lb (680 kg) | 18 lb (8.2 kg) |
| 40 | 0.500 in (12.70 mm) | 0.312 in (7.92 mm) | 3,125 lb (1,417 kg) | 31 lb (14 kg) |
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) | 4,880 lb (2,210 kg) | 49 lb (22 kg) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) | 7,030 lb (3,190 kg) | 70 lb (32 kg) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) | 12,500 lb (5,700 kg) | 125 lb (57 kg) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) | 19,531 lb (8,859 kg) | 195 lb (88 kg) |
| 120 | 1.500 in (38.10 mm) | 0.875 in (22.23 mm) | 28,125 lb (12,757 kg) | 281 lb (127 kg) |
| 140 | 1.750 in (44.45 mm) | 1.000 in (25.40 mm) | 38,280 lb (17,360 kg) | 383 lb (174 kg) |
| 160 | 2.000 in (50.80 mm) | 1.125 in (28.58 mm) | 50,000 lb (23,000 kg) | 500 lb (230 kg) |
| 180 | 2.250 in (57.15 mm) | 1.460 in (37.08 mm) | 63,280 lb (28,700 kg) | 633 lb (287 kg) |
| 200 | 2.500 in (63.50 mm) | 1.562 in (39.67 mm) | 78,175 lb (35,460 kg) | 781 lb (354 kg) |
| 240 | 3.000 in (76.20 mm) | 1.875 in (47.63 mm) | 112,500 lb (51,000 kg) | 1,000 lb (450 kg |
For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):
| Pitch (inches) | Pitch expressed in eighths |
ANSI standard chain number |
Width (inches) |
|---|---|---|---|
| 1⁄4 | 2⁄8 | 25 | 1⁄8 |
| 3⁄8 | 3⁄8 | 35 | 3⁄16 |
| 1⁄2 | 4⁄8 | 41 | 1⁄4 |
| 1⁄2 | 4⁄8 | 40 | 5⁄16 |
| 5⁄8 | 5⁄8 | 50 | 3⁄8 |
| 3⁄4 | 6⁄8 | 60 | 1⁄2 |
| 1 | 8⁄8 | 80 | 5⁄8 |
Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.
Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.
Roller chains made using ISO standard are sometimes called as isochains.
WHY CHOOSE US
1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.
We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.
| Standard Or Nonstandard: | Standard, Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Motorcycle, Machinery, Marine, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear, Cut Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | 1045, Stainless Steel |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What safety precautions should be taken when working with sprocket gear assemblies?
Working with sprocket gear assemblies requires adherence to safety guidelines to prevent accidents and injuries. Here are the safety precautions that should be taken:
1. Proper Training: Ensure that all personnel involved in working with sprocket gear assemblies are adequately trained in handling and operating the equipment. Training should cover safety procedures, potential hazards, and proper use of tools.
2. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses, gloves, and steel-toed boots when working with sprocket gear assemblies. This will protect against any flying debris or accidental contact with moving parts.
3. Lockout/Tagout (LOTO): Before performing any maintenance or inspection on sprocket gear assemblies, follow lockout/tagout procedures to isolate the equipment from its power source. This prevents accidental startup while someone is working on or near the gears.
4. Guarding: Ensure that all sprocket gear assemblies are properly guarded to prevent access to moving parts. Guards should be in place and well-maintained at all times.
5. Inspect Gears Regularly: Regularly inspect sprocket gears for signs of wear, damage, or misalignment. Address any issues promptly to prevent potential hazards.
6. Avoid Loose Clothing and Jewelry: Avoid wearing loose clothing, jewelry, or anything that could get caught in the gears. Tie back long hair to prevent entanglement.
7. Use the Right Tools: Always use the correct tools for the job when working with sprocket gear assemblies. Using improper tools can cause damage to the gears or pose safety risks.
8. Keep the Work Area Clean: Maintain a clean work area around the sprocket gear assembly to prevent slips, trips, and falls. Remove any debris or obstructions that could cause accidents.
9. Monitor Operating Conditions: Keep an eye on the operating conditions of the sprocket gear assembly. If you notice any unusual noises, vibrations, or performance issues, shut down the equipment immediately for inspection and repair.
10. Follow Manufacturer’s Instructions: Adhere to the manufacturer’s guidelines and recommendations for the installation, operation, and maintenance of the sprocket gear assembly.
11. Stay Alert and Focused: Always remain attentive and focused when working with sprocket gear assemblies. Avoid distractions to prevent accidents.
12. Seek Professional Help: If you are unsure about any aspect of working with sprocket gear assemblies, seek assistance from a qualified professional or supervisor.
By following these safety precautions, you can create a safer working environment and reduce the risk of accidents when dealing with sprocket gear assemblies.
How do I prevent chain elongation in a sprocket gear system?
Preventing chain elongation is essential to maintain the efficiency and longevity of a sprocket gear system. Chain elongation occurs over time due to wear and stretch in the chain, leading to a change in pitch length and improper engagement with the sprocket teeth. Here are some measures to prevent chain elongation:
1. Proper Lubrication: Regular and adequate lubrication of the chain is crucial to reduce friction and wear between the chain’s components. Lubricants also help prevent corrosion and reduce the chances of chain elongation.
2. Correct Tension: Maintaining the correct chain tension is vital to prevent excessive stress and elongation. Too much tension can accelerate wear, while too little tension can lead to slippage and increased elongation. Follow the manufacturer’s guidelines for proper tensioning.
3. Quality Chain: Invest in high-quality chains that are designed to resist elongation and offer better wear resistance. High-strength chains with heat-treated components are more resistant to elongation.
4. Proper Alignment: Ensure the sprockets are properly aligned to minimize lateral forces on the chain. Misalignment can cause uneven wear and accelerated elongation.
5. Regular Inspection: Perform routine inspections of the sprocket gear system to check for signs of wear, elongation, or any other issues. Address any problems promptly to prevent further damage.
6. Replace Worn Components: As the chain and sprockets wear over time, replace them when they reach their wear limits. Continuing to use worn components can accelerate elongation and lead to premature failure.
7. Avoid Overloading: Operating the sprocket gear system within its designed load capacity will help minimize stress on the chain, reducing the chances of elongation.
8. Environmental Considerations: In harsh or abrasive environments, protective measures like covers or guards can help prevent contaminants from accelerating chain wear and elongation.
By implementing these preventive measures, you can significantly reduce the risk of chain elongation and ensure a longer and more reliable service life for your sprocket gear system.
Can sprocket gears be used in high-temperature environments?
Yes, sprocket gears can be used in high-temperature environments, but the selection of materials and lubricants is crucial to ensure their proper functioning and longevity.
High-temperature environments can pose several challenges to sprocket gears, including:
- Material Integrity: Sprocket gears must be made from materials that can withstand the elevated temperatures without losing their mechanical properties. Standard carbon steels may not be suitable for high-temperature applications as they can undergo thermal degradation.
- Lubrication: The lubricants used for sprocket gears in high-temperature environments should have a high temperature resistance to maintain proper lubrication and prevent wear. Conventional lubricants may break down or evaporate at high temperatures.
- Thermal Expansion: High temperatures can cause materials to expand, which may affect the clearances and tolerances between the sprocket gear teeth and other components, leading to misalignment or binding issues.
To address these challenges, sprocket gears in high-temperature environments are typically made from heat-resistant materials, such as alloy steels or stainless steels. These materials can retain their mechanical strength and resist deformation at elevated temperatures.
Additionally, special high-temperature lubricants, such as synthetic oils or greases, are used to ensure adequate lubrication and reduce friction and wear in the sprocket gear system.
Proper design considerations are essential when using sprocket gears in high-temperature environments. Engineers must account for thermal expansion effects and provide sufficient clearances to accommodate the temperature-induced dimensional changes.
In summary, with the right choice of materials, lubricants, and design considerations, sprocket gears can effectively and reliably operate in high-temperature environments, making them suitable for various industrial applications where elevated temperatures are encountered.
editor by CX 2023-08-15
China 08B14T steel Duplex chain sprocket for conveyor roller manufacturer
Situation: New
Guarantee: 1 Calendar year
Applicable Industries: Hotels, Garment Shops, Creating Materials Outlets, Machinery Mend Retailers, Producing Plant, Higher High quality snake spring horizontal set up forty five# metal grid coupling steel flexible shaft connector serpentine spring Meals & Beverage Manufacturing unit, Farms, Restaurant, Property Use, Retail, Manufacturing unit direct sale Z17A-100145 shaft locking assemblies torque transmission equal to Tollok locking unit Foods Store, Printing Shops, Construction works , Energy & Mining, Food & Beverage Retailers, CZPT substantial quality flexible jaw coupling Advertising and marketing Business, Other
Fat (KG): .5
Showroom Place: Malaysia
Video outgoing-inspection: Provided
Machinery Check Report: Offered
Advertising and marketing Type: Common Solution
Regular: ISO
Quality: 08B
Substance: C45 metal
Bearing: Domestic Model
Surface Treatment: Zinc Plated
Warmth therapy: Higher frequency quenching
Pitch diameter: fifty seven.07mm
Fitted chain pitch: 12.7mm
Sprocket thickness: 6.8mm
Fitted chain diameter: 8.51mm
Packaging Information: Luggage/Cartons + wood cases
Merchandise Description SprocketsSingle sprocket drive: Compact structure, suited for the situation of center and light-weight load, low pace, continuing operation. A chain drives all the one sprocket rollers on the conveyor. By the information bars (popularly named chain assistance), Tyre Coupling LA5 kind versatile shaft connector Higher Quality torque transmission normal rubber 45# metal non-lubricating the chain is fixed in between the sprocket and chain assist.Double sprockets drive: Suitable for issue of hefty responsibility load, high velocity, usually on/off. Chain meshes on the sprocket of roller by the hooks-ups method. The convey is accomplished by roller-to-roller way. Application Product Paramenters Principal parameter Simplex chain sprocket Duplex chain sprocket Consumer provider Customer Photos Make contact with
What is a sprocket?
A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
ISO sprocket uniformity
ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.
metal sprocket
Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
plastic sprocket
Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
Aluminum sprocket
Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
editor by Cx 2023-06-26
China 2020 New Design Stainless Steel Drive Roller with Double Sprocket for Conveyor System chain sprocket
Condition: New, New
Warranty: 6 Months
Relevant Industries: Production Plant, Foods & Beverage Manufacturing unit, Foods & Beverage Retailers
Showroom Spot: Indonesia, Thailand, Malaysia
Merchandise name: Conveyor Cost-free Roller
Application: Logistics, foodstuff, chemical transporting
Roller Material: Galvanized metal, stainless metal,PVC
Electrical power device: Gear motor drive, electric roller driver
Transmission areas: Belt travel, chain push
Voltage: according to the client’s prerequisite
Dimension(L*W*H): Custom-made Measurement
Material Characteristic: Heat Resistant
Body Material: Carbon steel, stainless steel, aluminum
After Warranty Service: Video technical support, Online assist, Spare elements, Field upkeep and repair support
Nearby Service Location: Indonesia, Thailand, Malaysia
Packaging Information: As your requirement
<font color="# Wechat/ : our company website(https:// )
How to choose a sprocket in CZPT
Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
Pitch sprocket
When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.
three sprockets
Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
Cone lock sprocket
Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.
Quick release sprocket
There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
Irregular sprocket
Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
editor by Cx 2023-05-08
China 12B-1 19.05mm Pitch Good Quality C45 Steel 12B 10 Tooth Transmission Roller Chain Sprocket sprocket design build
Warranty: 3 thirty day period
Applicable Industries: Constructing Substance Stores, Manufacturing Plant, Machinery Mend Outlets, Foods & Beverage Factory, Farms, Property Use, Retail, Food Shop, Printing Outlets, Design works , Vitality & Mining, Foodstuff & Beverage Shops, Other, Advertising and marketing Organization
Tailored help: OEM
Material: Metal
Regular: ISO
Merchandise name: Chain Sprocket
Chain design: 12B-one
Tooth: 10T
Product: 12B-1 Z10
Surface remedy: Warmth Therapy
Certificate: ISO9001:2008
Software: Transmission Device
Bore dimensions: settle for tailored
Pitch: 19.05mm
Function: Large Temperature Resistance .carrying Functionality
Packaging Specifics: Interior plastic bag and outer carton box or customer need for 12B-1 19.05mm Pitch Great High quality C45 Steel 12B 10 Tooth Transmission Roller Chain Sprocket
Port: ZheJiang / HangZhou/HangZhou /HangZhou
Merchandise Overview 12B-1 19.05mm Pitch Excellent Top quality C45 Steel 12B 10 Tooth Transmission Roller Chain Sprocket Sprocket content:Alloy metal, carbon metal, stainless metal, hardend & Factory Cost Passionate Would like Stone Few Necklace Valentine’s Working day Jewellery Really like Heart Pendant Matching Necklace For Lovers tempered steel, solid iron, aluminum,copper ,brass,A3, Q235,Q345 and so 1, as your ask for.Approach:ForgedHeat treatment: higher frequency quenching, heat treatment , hardend teethSurface remedy:blacking , galvanization,chroming,electrophoresis ,coloration portray, or as your requirement.Efficiency:Substantial precision, substantial torsion , TS4C-20-fifty six Clamp variety parallel coupling Aluminum alloy stainless steel a single-piece metallic spring beam coupling for servomotor high use resistance,reduced noise, clean and continual , substantial power,sturdy.Type: standard and non-normal. can procedure inner hole and keyway. Can be tailored in accordance to your drawings.Series: A sequence sprocket , B sequence sprocket , one row sprocket with action or without step, double row sprocket with action or with out action, as you need.
| SIMPLEX CHAIN SPROCKET NO. | OD | PD | B1 | dm1 | A1 | D1 |
| 12B-1-8Z | 58.00 | 49.seventy eight | 11.one | 31 | 30 | 12 |
| 12B-1-9Z | 63.ninety | 55.70 | 11.one | 37 | 30 | 12 |
| 12B-1-10Z | 69.80 | 61.64 | 11.1 | 42 | 30 | 12 |
| 12B-1-11Z | 75.80 | 67.sixty one | 11.one | 46 | 35 | 16 |
| 12B-1-12Z | 81.eighty | 73.61 | 11.one | 52 | 35 | 16 |
| 12B-1-13Z | 87.80 | 79.fifty nine | 11.1 | 58 | 35 | 16 |
| 12B-1-14Z | 93.eighty | 85.sixty one | 11.one | 64 | 35 | 16 |
| 12B-1-15Z | 99.80 | 91.sixty three | 11.one | 70 | 35 | 16 |
| 12B-1-16Z | 105.80 | 97.65 | 11.one | 75 | 35 | 16 |
| 12B-1-17Z | 111.ninety | 103.sixty seven | 11.one | 80 | 35 | 16 |
| 12B-1-18Z | 117.90 | 109.71 | 11.one | 80 | 35 | 16 |
| 12B-1-19Z | 123.ninety | 115.75 | 11.one | 80 | 35 | 16 |
| 12B-1-20Z | 130.00 | 121.seventy eight | 11.one | 80 | 35 | 16 |
| 12B-1-21Z | 136.00 | 127.82 | 11.1 | 90 | 40 | 20 |
| 12B-1-22Z | 142.00 | 133.86 | 11.1 | 90 | 40 | 20 |
| 12B-1-23Z | 148.10 | 139.ninety | 11.1 | 90 | 40 | 20 |
| 12B-1-24Z | 154.10 | 145.ninety four | 11.1 | 90 | 40 | 20 |
| 12B-1-25Z | 160.twenty | 152.00 | 11.1 | 90 | 40 | 20 |
| 12B-1-26Z | 166.twenty | 158.04 | 11.1 | 95 | 40 | 20 |
| 12B-1-27Z | 172.thirty | 164.09 | 11.1 | 95 | 40 | 20 |
| 12B-1-28Z | 178.thirty | 170.thirteen | 11.1 | 95 | 40 | 20 |
| 12B-1-29Z | 184.forty | 176.19 | 11.1 | 95 | 40 | 20 |
| 12B-1-30Z | 190.40 | 182.twenty five | 11.one | 95 | 40 | 20 |
| 12B-1-31Z | 196.fifty | 188.31 | 11.1 | 95 | 40 | 20 |
| 12B-1-32Z | 202.fifty | 194.35 | 11.1 | 95 | 40 | 20 |
| 12B-1-33Z | 209.thirty | 200.40 | 11.one | 95 | 40 | 20 |
| 12B-1-34Z | 214.sixty | 206.46 | 11.1 | 95 | 40 | 20 |
| 12B-1-35Z | 220.70 | 212.52 | 11.1 | 95 | 40 | 20 |
| 12B-1-36Z | 226.eighty | 218.58 | 11.1 | 100 | 40 | 20 |
| 12B-1-37Z | 232.80 | 224.sixty four | 11.one | 100 | 40 | 20 |
| 12B-1-38Z | 238.ninety | 230.sixty nine | 11.1 | 100 | 40 | 20 |
| 12B-1-39Z | 244.ninety | 236.seventy five | 11.one | 100 | 40 | 20 |
| 12B-1-40Z | 251.00 | 242.81 | 11.one | 100 | 40 | 20 |
How to Use Sprocket for Conversion Optimization
The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
Typical sprocket
Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.
Function
Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
element
Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
Put on
Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.
editor by Cx 2023-04-28
China 08B12T steel simplex chain sprocket for 50mm diameter conveyor roller a hub sprocket
Error:获取session失败，
Problems with sprockets
If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.
Common types of sprockets
Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
Size of sprockets
To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
Maintenance of sprockets
Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.
editor by CX 2023-04-24
China 0.81.01.21.52.03.04.0mm Thickness Stainless Steel Unpowered Knurling Roller For Wrapping Machine did chain and sprocket kit
Error:获取session失败，
What you need to know about sprockets
If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
Various types of sprockets
There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
teeth
There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.
Hole
Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
asphalt
Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.
editor by CX 2023-04-23
China factory High Quality Electrophoretic-Coated Tooth Surface Hardening Stainless Steel Sprocket for Roller Chain sprocket bar
Product Description
High Quality Electrophoretic-Coated Tooth Surface Hardening Stainless Steel Sprocket for Roller Chain
Product Description
1. Produce strictly in accordance with standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA,Standard America or Customer’s Drawing
4. Pilot bore, finished bore, taper bore and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
Detailed Photos
View more products,please click here…
Company Profile
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Machinery, Agricultural Machinery, Industry |
| Hardness: | Soft Tooth Surface |
| 40: | 1/2" |
| 50: | 5/8" |
| 60: | 3/4" |
| Samples: |
US$ 0.9/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by CX 2023-04-23
China 08B12T steel simplex chain sprocket for 50mm diameter conveyor roller wheel and sprocket
Problem: New
Guarantee: 1 Year
Applicable Industries: Lodges, Garment Shops, Building Substance Retailers, Equipment Repair Stores, Production Plant, Meals & Beverage Manufacturing unit, Farms, Coupling Company Keyway type disc coupling Manufacturing facility Value 45# steel higher torque stepmotor join versatile shaft coupling Restaurant, Property Use, Retail, Foodstuff Store, Printing Retailers, Design works , Vitality & Mining, Manufacturing unit Price tag Z12 kind keyless shaft hub locking system utilised for coupling clamp electrical power locks cam assembly Very hot Sale Meals & Beverage Shops, Promoting Business, Other
Weight (KG): .four
Showroom Spot: Malaysia
Video clip outgoing-inspection: Supplied
Machinery Examination Report: Supplied
Marketing and advertising Sort: Normal Merchandise
Normal: ISO
Quality: 08B
Content: C45 metal
Bearing: Domestic Manufacturer
Floor Remedy: Zinc Plated
Heat treatment method: Substantial frequency quenching
Pitch diameter: fifty seven.07mm
Equipped chain pitch: twelve.7mm
Sprocket thickness: 7.1mm
Fitted chain diameter: 8.51mm
Packaging Specifics: Luggage/Cartons + picket instances
Products Description SprocketsSingle sprocket push: Compact structure, ideal for the issue of center and light load, lower speed, continuing operation. A chain drives all the solitary sprocket rollers on the conveyor. By the manual bars (popularly named chain assist), the chain is mounted amongst the sprocket and chain help.Double sprockets push: Suited for problem of heavy obligation load, TS ten series Stainless steel Spring type Bellows Coupling higher speed, regularly on/off. Chain meshes on the sprocket of roller by the hooks-ups strategy. The convey is achieved by roller-to-roller way. Software Product Paramenters Principal parameter Simplex chain sprocket Duplex chain sprocket Client services Consumer Pictures Make contact with
Sprocket Basics
When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
size
There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.
Material
Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
Function
A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
maintain
Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.
editor by CX 2023-04-22
China 12b-1 19.05mm Pitch Good Quality C45 Steel 12b 10 Tooth Transmission Roller Chain Sprocket with Great quality
Product Description
Product Description
Sprocket material:Alloy steel, carbon steel, stainless steel, hardend & tempered steel, cast iron, aluminum,copper ,brass,A3,
Q235,Q345 and so one, as your request.
Process:Forged
Heat treatment: high frequency quenching, heat treatment , hardend teeth
Surface treatment:blacking , galvanization,chroming,electrophoresis ,color painting, or as your requirement.
Performance:High precision, high torsion , high wear resistance,low noise, smooth and steady , high strength,durable.
Type: standard and non-standard. can process inner hole and keyway. Can be customized according to your drawings.
Series: A series sprocket , B series sprocket , single row sprocket with step or without step, double row sprocket with step
or without step, as you need.
Other Models
|
SIMPLEX CHAIN SPROCKET NO. |
OD |
PD |
B1 |
dm1 |
A1 |
D1 |
|
12B-1-8Z |
58.00 |
49.78 |
11.1 |
31 |
30 |
12 |
|
12B-1-9Z |
63.90 |
55.70 |
11.1 |
37 |
30 |
12 |
|
12B-1-10Z |
69.80 |
61.64 |
11.1 |
42 |
30 |
12 |
|
12B-1-11Z |
75.80 |
67.61 |
11.1 |
46 |
35 |
16 |
|
12B-1-12Z |
81.80 |
73.61 |
11.1 |
52 |
35 |
16 |
|
12B-1-13Z |
87.80 |
79.59 |
11.1 |
58 |
35 |
16 |
|
12B-1-14Z |
93.80 |
85.61 |
11.1 |
64 |
35 |
16 |
|
12B-1-15Z |
99.80 |
91.63 |
11.1 |
70 |
35 |
16 |
|
12B-1-16Z |
105.80 |
97.65 |
11.1 |
75 |
35 |
16 |
|
12B-1-17Z |
111.90 |
103.67 |
11.1 |
80 |
35 |
16 |
|
12B-1-18Z |
117.90 |
109.71 |
11.1 |
80 |
35 |
16 |
|
12B-1-19Z |
123.90 |
115.75 |
11.1 |
80 |
35 |
16 |
|
12B-1-20Z |
130.00 |
121.78 |
11.1 |
80 |
35 |
16 |
|
12B-1-21Z |
136.00 |
127.82 |
11.1 |
90 |
40 |
20 |
|
12B-1-22Z |
142.00 |
133.86 |
11.1 |
90 |
40 |
20 |
|
12B-1-23Z |
148.10 |
139.90 |
11.1 |
90 |
40 |
20 |
|
12B-1-24Z |
154.10 |
145.94 |
11.1 |
90 |
40 |
20 |
|
12B-1-25Z |
160.20 |
152.00 |
11.1 |
90 |
40 |
20 |
|
12B-1-26Z |
166.20 |
158.04 |
11.1 |
95 |
40 |
20 |
|
12B-1-27Z |
172.30 |
164.09 |
11.1 |
95 |
40 |
20 |
|
12B-1-28Z |
178.30 |
170.13 |
11.1 |
95 |
40 |
20 |
|
12B-1-29Z |
184.40 |
176.19 |
11.1 |
95 |
40 |
20 |
|
12B-1-30Z |
190.40 |
182.25 |
11.1 |
95 |
40 |
20 |
|
12B-1-31Z |
196.50 |
188.31 |
11.1 |
95 |
40 |
20 |
|
12B-1-32Z |
202.50 |
194.35 |
11.1 |
95 |
40 |
20 |
|
12B-1-33Z |
209.30 |
200.40 |
11.1 |
95 |
40 |
20 |
|
12B-1-34Z |
214.60 |
206.46 |
11.1 |
95 |
40 |
20 |
|
12B-1-35Z |
220.70 |
212.52 |
11.1 |
95 |
40 |
20 |
|
12B-1-36Z |
226.80 |
218.58 |
11.1 |
100 |
40 |
20 |
|
12B-1-37Z |
232.80 |
224.64 |
11.1 |
100 |
40 |
20 |
|
12B-1-38Z |
238.90 |
230.69 |
11.1 |
100 |
40 |
20 |
|
12B-1-39Z |
244.90 |
236.75 |
11.1 |
100 |
40 |
20 |
|
12B-1-40Z |
251.00 |
242.81 |
11.1 |
100 |
40 |
20 |
Company Profile
HangZhou Terry Machinery Co.Ltd is a leading supplier of bearings, Linear motion system for CNC , Ball transfer
Unit and transmission component .the growing industrial and Favorable policy of HangZhou benefit the developm
ent of Terry Machinery .Our products are utilized in industrial, motorcycle, vehicle and Automation applications.
Now we are exporting to 46 countries. including USA, GBR , Germany , Spain, Poland ,Turkey ect .The Goal o
f Terry Machinery to provide out customers with widest range of products at competitive prices, backed with the
best Service.OUR ADVANTAGE Products Our major products & Supplied:Meet all the international standards
and ISO9001 -TS1694 Certificate Big volume in Stock, No MOQ required Personnel Our salespersons are well
trained to accommodate your requests and speak English for your conveniences.Our technicians and engineers
Experience in the Industry area exceeds 23 years Service &Quality control ,We supply detailed drawings and
offer when ever necessary,We help all customers promote and improve their sales.We inspect every piece of
products by ourselves before delivery.
production process
Application
related product
product-list-1.html
Packing &Delivery
Customer Praise
FAQ
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Conveyor Systems |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Curved Gear |
| Material: | Alloy |
###
|
SIMPLEX CHAIN SPROCKET NO.
|
OD
|
PD
|
B1
|
dm1
|
A1
|
D1
|
|
12B-1-8Z
|
58.00
|
49.78
|
11.1
|
31
|
30
|
12
|
|
12B-1-9Z
|
63.90
|
55.70
|
11.1
|
37
|
30
|
12
|
|
12B-1-10Z
|
69.80
|
61.64
|
11.1
|
42
|
30
|
12
|
|
12B-1-11Z
|
75.80
|
67.61
|
11.1
|
46
|
35
|
16
|
|
12B-1-12Z
|
81.80
|
73.61
|
11.1
|
52
|
35
|
16
|
|
12B-1-13Z
|
87.80
|
79.59
|
11.1
|
58
|
35
|
16
|
|
12B-1-14Z
|
93.80
|
85.61
|
11.1
|
64
|
35
|
16
|
|
12B-1-15Z
|
99.80
|
91.63
|
11.1
|
70
|
35
|
16
|
|
12B-1-16Z
|
105.80
|
97.65
|
11.1
|
75
|
35
|
16
|
|
12B-1-17Z
|
111.90
|
103.67
|
11.1
|
80
|
35
|
16
|
|
12B-1-18Z
|
117.90
|
109.71
|
11.1
|
80
|
35
|
16
|
|
12B-1-19Z
|
123.90
|
115.75
|
11.1
|
80
|
35
|
16
|
|
12B-1-20Z
|
130.00
|
121.78
|
11.1
|
80
|
35
|
16
|
|
12B-1-21Z
|
136.00
|
127.82
|
11.1
|
90
|
40
|
20
|
|
12B-1-22Z
|
142.00
|
133.86
|
11.1
|
90
|
40
|
20
|
|
12B-1-23Z
|
148.10
|
139.90
|
11.1
|
90
|
40
|
20
|
|
12B-1-24Z
|
154.10
|
145.94
|
11.1
|
90
|
40
|
20
|
|
12B-1-25Z
|
160.20
|
152.00
|
11.1
|
90
|
40
|
20
|
|
12B-1-26Z
|
166.20
|
158.04
|
11.1
|
95
|
40
|
20
|
|
12B-1-27Z
|
172.30
|
164.09
|
11.1
|
95
|
40
|
20
|
|
12B-1-28Z
|
178.30
|
170.13
|
11.1
|
95
|
40
|
20
|
|
12B-1-29Z
|
184.40
|
176.19
|
11.1
|
95
|
40
|
20
|
|
12B-1-30Z
|
190.40
|
182.25
|
11.1
|
95
|
40
|
20
|
|
12B-1-31Z
|
196.50
|
188.31
|
11.1
|
95
|
40
|
20
|
|
12B-1-32Z
|
202.50
|
194.35
|
11.1
|
95
|
40
|
20
|
|
12B-1-33Z
|
209.30
|
200.40
|
11.1
|
95
|
40
|
20
|
|
12B-1-34Z
|
214.60
|
206.46
|
11.1
|
95
|
40
|
20
|
|
12B-1-35Z
|
220.70
|
212.52
|
11.1
|
95
|
40
|
20
|
|
12B-1-36Z
|
226.80
|
218.58
|
11.1
|
100
|
40
|
20
|
|
12B-1-37Z
|
232.80
|
224.64
|
11.1
|
100
|
40
|
20
|
|
12B-1-38Z
|
238.90
|
230.69
|
11.1
|
100
|
40
|
20
|
|
12B-1-39Z
|
244.90
|
236.75
|
11.1
|
100
|
40
|
20
|
|
12B-1-40Z
|
251.00
|
242.81
|
11.1
|
100
|
40
|
20
|
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Conveyor Systems |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Curved Gear |
| Material: | Alloy |
###
|
SIMPLEX CHAIN SPROCKET NO.
|
OD
|
PD
|
B1
|
dm1
|
A1
|
D1
|
|
12B-1-8Z
|
58.00
|
49.78
|
11.1
|
31
|
30
|
12
|
|
12B-1-9Z
|
63.90
|
55.70
|
11.1
|
37
|
30
|
12
|
|
12B-1-10Z
|
69.80
|
61.64
|
11.1
|
42
|
30
|
12
|
|
12B-1-11Z
|
75.80
|
67.61
|
11.1
|
46
|
35
|
16
|
|
12B-1-12Z
|
81.80
|
73.61
|
11.1
|
52
|
35
|
16
|
|
12B-1-13Z
|
87.80
|
79.59
|
11.1
|
58
|
35
|
16
|
|
12B-1-14Z
|
93.80
|
85.61
|
11.1
|
64
|
35
|
16
|
|
12B-1-15Z
|
99.80
|
91.63
|
11.1
|
70
|
35
|
16
|
|
12B-1-16Z
|
105.80
|
97.65
|
11.1
|
75
|
35
|
16
|
|
12B-1-17Z
|
111.90
|
103.67
|
11.1
|
80
|
35
|
16
|
|
12B-1-18Z
|
117.90
|
109.71
|
11.1
|
80
|
35
|
16
|
|
12B-1-19Z
|
123.90
|
115.75
|
11.1
|
80
|
35
|
16
|
|
12B-1-20Z
|
130.00
|
121.78
|
11.1
|
80
|
35
|
16
|
|
12B-1-21Z
|
136.00
|
127.82
|
11.1
|
90
|
40
|
20
|
|
12B-1-22Z
|
142.00
|
133.86
|
11.1
|
90
|
40
|
20
|
|
12B-1-23Z
|
148.10
|
139.90
|
11.1
|
90
|
40
|
20
|
|
12B-1-24Z
|
154.10
|
145.94
|
11.1
|
90
|
40
|
20
|
|
12B-1-25Z
|
160.20
|
152.00
|
11.1
|
90
|
40
|
20
|
|
12B-1-26Z
|
166.20
|
158.04
|
11.1
|
95
|
40
|
20
|
|
12B-1-27Z
|
172.30
|
164.09
|
11.1
|
95
|
40
|
20
|
|
12B-1-28Z
|
178.30
|
170.13
|
11.1
|
95
|
40
|
20
|
|
12B-1-29Z
|
184.40
|
176.19
|
11.1
|
95
|
40
|
20
|
|
12B-1-30Z
|
190.40
|
182.25
|
11.1
|
95
|
40
|
20
|
|
12B-1-31Z
|
196.50
|
188.31
|
11.1
|
95
|
40
|
20
|
|
12B-1-32Z
|
202.50
|
194.35
|
11.1
|
95
|
40
|
20
|
|
12B-1-33Z
|
209.30
|
200.40
|
11.1
|
95
|
40
|
20
|
|
12B-1-34Z
|
214.60
|
206.46
|
11.1
|
95
|
40
|
20
|
|
12B-1-35Z
|
220.70
|
212.52
|
11.1
|
95
|
40
|
20
|
|
12B-1-36Z
|
226.80
|
218.58
|
11.1
|
100
|
40
|
20
|
|
12B-1-37Z
|
232.80
|
224.64
|
11.1
|
100
|
40
|
20
|
|
12B-1-38Z
|
238.90
|
230.69
|
11.1
|
100
|
40
|
20
|
|
12B-1-39Z
|
244.90
|
236.75
|
11.1
|
100
|
40
|
20
|
|
12B-1-40Z
|
251.00
|
242.81
|
11.1
|
100
|
40
|
20
|
Sprocket Basics
When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
size
There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.
Material
Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
Function
A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
maintain
Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.
editor by CX2023-04-04
China High Precision Sprocket Stainless Steel Sprocket Roller Chain Sprocket Transmission Driven Sprocket supplier
Product Description
High Precision Sprocket Stainless Steel Sprocket Roller Chain Sprocket Transmission Driven Sprocket
Product Description
Features and Benefits
- Manufactured according to ISO606 & ASME B29.100 standard
- Available in plate, single hub, and double hub configurations
- Made from high-grade steel and carbon steel
- Optional taper bushes simplify installation and removal
- Special products made from grey cast iron HT250 or cast iron 250
- Surface treatment, including black oxide, available on request
Product Parameters
Detailed Photos
FAQ
Q: Do you provide samples?
A: Yes. A sample is available for testing.
Q: What’s your lead time?
A: Standard products need 5-30days, a bit longer for customized products.
Q: Do you provide technical support?
A: Yes. Our company has a design and development team, and we can provide technical support if you
need.
Q: How to ship to us?
A: It is available by air, sea, or train.
Q: How to pay the money?
A: T/T and L/C are preferred, with different currencies, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Electric Cars, Motorcycle, Machinery, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Electric Cars, Motorcycle, Machinery, Agricultural Machinery |
| Hardness: | Hardened Tooth Surface |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
Select sprocket
If you are in the market for a new sprocket, there are several factors to consider. There are two basic types of sprockets: roller sprockets and flat bore sprockets. Each has its pros and cons, so it’s important to choose the right one for your needs.
Roller sprocket
A roller sprocket is a mechanical device used to turn a rotating shaft. The size of the sprocket depends on its speed and the size of the chain. It has a wide range of applications. In addition, it is a versatile mechanical device that is an excellent choice for a variety of applications.
To understand the design of a roller sprocket, you can draw an outline on a piece of paper and draw the radius of the roller. This will help you understand how your teeth are configured. For example, if the teeth of the sprocket are round, the rollers will have a semi-circular profile. Likewise, if the roller is linear, the arc will be tangent to the base circle. This will ensure smooth movement of the rollers, while also transmitting rotational motion with high precision.
The length of the roller chain varies depending on the drive type. In adjustable center drives, the chain should be replaced at 3% elongation, while fixed center drives should be replaced at 15% elongation. You can also check the chain condition of the sprocket by pulling the chain out of the larger sprocket. If the chain is moving off the larger sprocket, it is time to replace the roller chain. Neglecting this aspect can result in damage to the sprocket.
The present invention relates to the manufacture of chain drive sprockets with a backlash-free mechanism. This is achieved by providing a center-to-center offset between the sprocket and roller connection lines. The resulting chain drive is backlash-free and allows full contact between the rollers and teeth.
Roller sprockets are critical components to ensure maximum efficiency and uptime. Its dimensions—bore bore, hub diameter, and through-hole length—are important. Additionally, the size of the roller sprockets varies according to the chain pitch, which is the distance between the centers of the roller pins.Roller sprockets can be made of different materials, depending on their purpose. Most sprockets are made of metal or reinforced plastic. Some have bosses, some are shaped like wheels. Sprockets can be made of easily machined steel or resin. Different types of chains will engage different sprockets.
In addition to being used to mesh with chain drives, roller sprockets come in many different styles and bores. They are versatile and are often used with roller chains. Some are made of 1045CD carbon steel and have hardened teeth. Additionally, they are fully ANSI B29.1 compliant and some are manufactured for OEMs and aftermarket suppliers.
Flat hole sprocket
Flat bore sprockets are sprockets that are not specially machined. Flat bore sprockets do not have set screws, keyways or other special features. These features often require additional machining prior to installation. An important thing to keep in mind when buying a flat bore sprocket is the maximum bore. This refers to the maximum size that can be drilled without compromising structural integrity. Such measurements are usually listed in supplier directories.
Flat bore sprockets are available with standard bore or metric bore. Sprockets are used with specific chains. All chains are manufactured to a standard called “pitch”. The pitch is the distance from the center of one needle to the center of the next needle.
Steel split sprocket
Steel split sprockets can be used in a variety of industrial applications. These sprockets can be used in a range of applications, from forestry and mining to food and plastics processing. These types of sprockets are available in a variety of bores, tooth counts, and sprocket styles. Some types are also abrasion resistant.
There are several manufacturers that offer steel split sprockets. Made from high carbon steel, they are available in split, solid and removable rim versions. These sprockets are also suitable for hydraulic or pneumatic systems. Some manufacturers also offer service and support, including life cycle performance analysis, customer part numbers, and barcodes.
Split sprockets are ideal for applications where the drive shaft is large and multiple sprockets are mounted on the same shaft. For example, large conveyor chain sprockets may require the use of a crane to install and may result in increased downtime. Split sprockets also make installation in tight spaces easier. They can also be easily assembled without disassembling the shaft assembly.
Split sprockets are available in stock and custom sizes. small Stainless steel sprockets are also available, as are split flat top conveyor sprockets. They are commonly used in conveyors and robotic systems. Certain types of sprockets are suitable for specific applications, including woodworking, food processing, and woodworking.
Dimensions of split sprockets may vary by application. For example, split hub sprockets can range from one-half inch to one-tenth of an inch. Additionally, split hub sprockets have bolt circle diameters ranging from three-quarters to thirteen inches.
editor by CX2023-03-28