Product Description
Product Description
Our in-stock standard double pitch sprockets are manufactured out of SAE-1045 case hardened steel with extra-hardened teeth and coated with black oxide. These sprockets are extremely durable, high-strength, and manufactured to high precision tolerances. Stock double pitch sprockets include standard roller and carrier roller style.
Below is a chart of all of the standard C2060 double pitch roller chain sprockets. We also stock a full line of high quality C2060 roller chain.
Product Parameters
| Sprocket Size | Tooth Count | Outside Diameter | Stock Bore | Maximum Bore | Length Thru Bore | Weight |
|---|---|---|---|---|---|---|
|
2060A24 |
24 | 6.150″ | 23/32″ | — | — | 3.02 LBS |
|
2060A25 |
25 | 6.390″ | 23/32″ | — | — | 3.36 LBS |
|
2060A26 |
26 | 6.630″ | 23/32″ | — | — | 3.58 LBS |
|
2060A28 |
28 | 7.110″ | 23/32″ | — | — | 4.12 LBS |
|
2060A30 |
30 | 7.590″ | 23/32″ | — | — | 4.88 LBS |
|
2060B11 |
11 | 3.000″ | 3/4″ | 1″ | 1-1/4″ | 1.14 LBS |
|
2060B12 |
12 | 3.250″ | 3/4″ | 1-1/4″ | 1-1/4″ | 1.46 LBS |
|
2060B13 |
13 | 3.490″ | 3/4″ | 1-5/16″ | 1-1/4″ | 1.52 LBS |
|
2060B14 |
14 | 3.740″ | 3/4″ | 1-9/16″ | 1-1/4″ | 1.86 LBS |
|
2060B15 |
15 | 3.980″ | 3/4″ | 1-3/4″ | 1-1/4″ | 2.24 LBS |
|
2060B16 |
16 | 4.220″ | 3/4″ | 1-27/32″ | 1-1/4″ | 2.64 LBS |
|
2060B17 |
17 | 4.460″ | 3/4″ | 2-3/32″ | 1-1/4″ | 3.08 LBS |
|
2060B18 |
18 | 4.700″ | 3/4″ | 2-9/32″ | 1-1/4″ | 3.56 LBS |
|
2060B19 |
19 | 4.940″ | 3/4″ | 2-11/32″ | 1-1/4″ | 3.94 LBS |
|
2060B20 |
20 | 5.190″ | 3/4″ | 2-9/16″ | 1-1/4″ | 4.50 LBS |
|
2060B21 |
21 | 5.430″ | 3/4″ | 2-3/4″ | 1-1/4″ | 5.02 LBS |
|
2060B22 |
22 | 5.670″ | 3/4″ | 2-3/4″ | 1-1/4″ | 5.26 LBS |
|
2060B23 |
23 | 5.910″ | 3/4″ | 2-3/4″ | 1-1/4″ | 5.54 LBS |
|
2060B24 |
24 | 6.150″ | 3/4″ | 2-3/4″ | 1-1/4″ | 5.90 LBS |
|
2060B25 |
25 | 6.390″ | 3/4″ | 2-3/4″ | 1-1/4″ | 6.08 LBS |
|
2060B26 |
26 | 6.630″ | 3/4″ | 2-3/4″ | 1-1/4″ | 6.36 LBS |
|
2060B28 |
28 | 7.110″ | 3/4″ | 2-3/4″ | 1-1/4″ | 7.02 LBS |
|
2060B30 |
30 | 7.590″ | 3/4″ | 2-3/4″ | 1-1/4″ | 7.54 LBS |
Company Profile
Services we can provide
1. Produce strictly following standard dimension
2. Material: 1045 Steel / Alloy Steel / Stainless Steel 304 & 316
3. Standard: ANSI, DIN, JINS, ISO, KANA, Standard America, or customer’s drawing
4. Pilot bore, finished bore, taper bore, and special bore.
5. Bright surface / high precision / Blacking /Electrophoretic-Coated
6. Advanced heat treatment and surface treatment craft
7. Best quality and competitive price.
8. Welcome OEM / ODM
9. Processing Equipment: Hobbing machine, Slotting machine, CNC lathes, and other equipment.
10. Sprocket Models: Contains special sprocket according to customer’s drawings, standard sprocket (American standard and metric).
Customization process
1.Provide documentation:CAD, DWG, DXF, PDF,3D model ,STEP, IGS, PRT
2.Quote:We will give you the best price within 24 hours
3.Place an order:Confirm the cooperation details and CZPT the contract, and provide the labeling service
4.Processing and customization:Short delivery time
Related products:
Factory:
As a professional China sprocket manufacturer and professional supplier, we ensure the quality of every sprocket. All items are checked and tested thoroughly during every working procedure and after the product is finally manufactured to ensure that the best quality product goes out in the market.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Sprocket Basics
When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
size
There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.
Material
Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
Function
A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
maintain
Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.
editor by CX 2023-05-25
China 2020 New Design Stainless Steel Drive Roller with Double Sprocket for Conveyor System chain sprocket
Condition: New, New
Warranty: 6 Months
Relevant Industries: Production Plant, Foods & Beverage Manufacturing unit, Foods & Beverage Retailers
Showroom Spot: Indonesia, Thailand, Malaysia
Merchandise name: Conveyor Cost-free Roller
Application: Logistics, foodstuff, chemical transporting
Roller Material: Galvanized metal, stainless metal,PVC
Electrical power device: Gear motor drive, electric roller driver
Transmission areas: Belt travel, chain push
Voltage: according to the client’s prerequisite
Dimension(L*W*H): Custom-made Measurement
Material Characteristic: Heat Resistant
Body Material: Carbon steel, stainless steel, aluminum
After Warranty Service: Video technical support, Online assist, Spare elements, Field upkeep and repair support
Nearby Service Location: Indonesia, Thailand, Malaysia
Packaging Information: As your requirement
<font color="# Wechat/ : our company website(https:// )
How to choose a sprocket in CZPT
Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
Pitch sprocket
When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.
three sprockets
Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
Cone lock sprocket
Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.
Quick release sprocket
There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
Irregular sprocket
Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
editor by Cx 2023-05-08
China best Mighty Sprocket 12b1 3/4′′x7/16′′ Pitch Single Roller Chain Sprocket 16b1 Agricultural Sprockets with Best Sales
Product Description
| Product Name | Sprocket | Place of origin | China |
| Brand | Mighty | Material | 304 Stainless Steel ,Steel |
| Bore Type | Pilot Bore,finished bore with keyway | Surface treatment | Blacking,Tooth heat treatment |
Main Products:
Timing belt pulleys, timing bars, timing belt clamping plates.
Locking elements and shrink discs: could be alternative for Ringfeder, Sati, Chiaravalli, BEA, KBK, Tollok, etc.
V belt pulleys and taper lock bush.
Sprockets, idler, and plate wheels.
Gears and racks: spur gear, helical gear, bevel gear, worm gear, gear rack.
Shaft couplings: miniature coupling, curved tooth coupling, chain coupling, HRC coupling, NM coupling, FCL coupling, GE coupling, rigid and flexible coupling, jaw coupling, disc coupling, multi-beam coupling, universal joint, torque limiter, shaft collars.
Forging, Casting, Stamping Parts.
Other customized power transmission products and Machining Parts (OEM).
Advantage:
1. Factory directly supply , we can continue to provide a stable supply
2. Many years manufacture experience , top quality guaranteed by skilled workers, managing system and status of facilities.
3. Competitive and reasonable price
4. OEM service, we can do as your drawings or samples
5. Quality Guarantee, 100% inspect before delivery
6. Good after-sale service, Our wokers are all professional and all can speak English.
7. Timely delivery, We have many long cooperation supplier. supply ONE-STOP service
8. High-tech CNC Machines
9. Independent Engineering Department
10.Kinds of surface treatment—Zinc Plating, Powder Coating, Anodizing, Chrome Plate, RoHs .etc .
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Cast Steel |
| Samples: |
US$ 0.5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How to Identify a Sprocket
When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
buy sprockets
When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.
Identify sprockets
One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
Replace sprocket
If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.
Replace worn chains
To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.
Check the sprocket for rust
One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
Replace worn sprockets
You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.
editor by CX 2023-04-21
China 12b-1 19.05mm Pitch Good Quality C45 Steel 12b 10 Tooth Transmission Roller Chain Sprocket with Great quality
Product Description
Product Description
Sprocket material:Alloy steel, carbon steel, stainless steel, hardend & tempered steel, cast iron, aluminum,copper ,brass,A3,
Q235,Q345 and so one, as your request.
Process:Forged
Heat treatment: high frequency quenching, heat treatment , hardend teeth
Surface treatment:blacking , galvanization,chroming,electrophoresis ,color painting, or as your requirement.
Performance:High precision, high torsion , high wear resistance,low noise, smooth and steady , high strength,durable.
Type: standard and non-standard. can process inner hole and keyway. Can be customized according to your drawings.
Series: A series sprocket , B series sprocket , single row sprocket with step or without step, double row sprocket with step
or without step, as you need.
Other Models
|
SIMPLEX CHAIN SPROCKET NO. |
OD |
PD |
B1 |
dm1 |
A1 |
D1 |
|
12B-1-8Z |
58.00 |
49.78 |
11.1 |
31 |
30 |
12 |
|
12B-1-9Z |
63.90 |
55.70 |
11.1 |
37 |
30 |
12 |
|
12B-1-10Z |
69.80 |
61.64 |
11.1 |
42 |
30 |
12 |
|
12B-1-11Z |
75.80 |
67.61 |
11.1 |
46 |
35 |
16 |
|
12B-1-12Z |
81.80 |
73.61 |
11.1 |
52 |
35 |
16 |
|
12B-1-13Z |
87.80 |
79.59 |
11.1 |
58 |
35 |
16 |
|
12B-1-14Z |
93.80 |
85.61 |
11.1 |
64 |
35 |
16 |
|
12B-1-15Z |
99.80 |
91.63 |
11.1 |
70 |
35 |
16 |
|
12B-1-16Z |
105.80 |
97.65 |
11.1 |
75 |
35 |
16 |
|
12B-1-17Z |
111.90 |
103.67 |
11.1 |
80 |
35 |
16 |
|
12B-1-18Z |
117.90 |
109.71 |
11.1 |
80 |
35 |
16 |
|
12B-1-19Z |
123.90 |
115.75 |
11.1 |
80 |
35 |
16 |
|
12B-1-20Z |
130.00 |
121.78 |
11.1 |
80 |
35 |
16 |
|
12B-1-21Z |
136.00 |
127.82 |
11.1 |
90 |
40 |
20 |
|
12B-1-22Z |
142.00 |
133.86 |
11.1 |
90 |
40 |
20 |
|
12B-1-23Z |
148.10 |
139.90 |
11.1 |
90 |
40 |
20 |
|
12B-1-24Z |
154.10 |
145.94 |
11.1 |
90 |
40 |
20 |
|
12B-1-25Z |
160.20 |
152.00 |
11.1 |
90 |
40 |
20 |
|
12B-1-26Z |
166.20 |
158.04 |
11.1 |
95 |
40 |
20 |
|
12B-1-27Z |
172.30 |
164.09 |
11.1 |
95 |
40 |
20 |
|
12B-1-28Z |
178.30 |
170.13 |
11.1 |
95 |
40 |
20 |
|
12B-1-29Z |
184.40 |
176.19 |
11.1 |
95 |
40 |
20 |
|
12B-1-30Z |
190.40 |
182.25 |
11.1 |
95 |
40 |
20 |
|
12B-1-31Z |
196.50 |
188.31 |
11.1 |
95 |
40 |
20 |
|
12B-1-32Z |
202.50 |
194.35 |
11.1 |
95 |
40 |
20 |
|
12B-1-33Z |
209.30 |
200.40 |
11.1 |
95 |
40 |
20 |
|
12B-1-34Z |
214.60 |
206.46 |
11.1 |
95 |
40 |
20 |
|
12B-1-35Z |
220.70 |
212.52 |
11.1 |
95 |
40 |
20 |
|
12B-1-36Z |
226.80 |
218.58 |
11.1 |
100 |
40 |
20 |
|
12B-1-37Z |
232.80 |
224.64 |
11.1 |
100 |
40 |
20 |
|
12B-1-38Z |
238.90 |
230.69 |
11.1 |
100 |
40 |
20 |
|
12B-1-39Z |
244.90 |
236.75 |
11.1 |
100 |
40 |
20 |
|
12B-1-40Z |
251.00 |
242.81 |
11.1 |
100 |
40 |
20 |
Company Profile
HangZhou Terry Machinery Co.Ltd is a leading supplier of bearings, Linear motion system for CNC , Ball transfer
Unit and transmission component .the growing industrial and Favorable policy of HangZhou benefit the developm
ent of Terry Machinery .Our products are utilized in industrial, motorcycle, vehicle and Automation applications.
Now we are exporting to 46 countries. including USA, GBR , Germany , Spain, Poland ,Turkey ect .The Goal o
f Terry Machinery to provide out customers with widest range of products at competitive prices, backed with the
best Service.OUR ADVANTAGE Products Our major products & Supplied:Meet all the international standards
and ISO9001 -TS1694 Certificate Big volume in Stock, No MOQ required Personnel Our salespersons are well
trained to accommodate your requests and speak English for your conveniences.Our technicians and engineers
Experience in the Industry area exceeds 23 years Service &Quality control ,We supply detailed drawings and
offer when ever necessary,We help all customers promote and improve their sales.We inspect every piece of
products by ourselves before delivery.
production process
Application
related product
product-list-1.html
Packing &Delivery
Customer Praise
FAQ
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Conveyor Systems |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Curved Gear |
| Material: | Alloy |
###
|
SIMPLEX CHAIN SPROCKET NO.
|
OD
|
PD
|
B1
|
dm1
|
A1
|
D1
|
|
12B-1-8Z
|
58.00
|
49.78
|
11.1
|
31
|
30
|
12
|
|
12B-1-9Z
|
63.90
|
55.70
|
11.1
|
37
|
30
|
12
|
|
12B-1-10Z
|
69.80
|
61.64
|
11.1
|
42
|
30
|
12
|
|
12B-1-11Z
|
75.80
|
67.61
|
11.1
|
46
|
35
|
16
|
|
12B-1-12Z
|
81.80
|
73.61
|
11.1
|
52
|
35
|
16
|
|
12B-1-13Z
|
87.80
|
79.59
|
11.1
|
58
|
35
|
16
|
|
12B-1-14Z
|
93.80
|
85.61
|
11.1
|
64
|
35
|
16
|
|
12B-1-15Z
|
99.80
|
91.63
|
11.1
|
70
|
35
|
16
|
|
12B-1-16Z
|
105.80
|
97.65
|
11.1
|
75
|
35
|
16
|
|
12B-1-17Z
|
111.90
|
103.67
|
11.1
|
80
|
35
|
16
|
|
12B-1-18Z
|
117.90
|
109.71
|
11.1
|
80
|
35
|
16
|
|
12B-1-19Z
|
123.90
|
115.75
|
11.1
|
80
|
35
|
16
|
|
12B-1-20Z
|
130.00
|
121.78
|
11.1
|
80
|
35
|
16
|
|
12B-1-21Z
|
136.00
|
127.82
|
11.1
|
90
|
40
|
20
|
|
12B-1-22Z
|
142.00
|
133.86
|
11.1
|
90
|
40
|
20
|
|
12B-1-23Z
|
148.10
|
139.90
|
11.1
|
90
|
40
|
20
|
|
12B-1-24Z
|
154.10
|
145.94
|
11.1
|
90
|
40
|
20
|
|
12B-1-25Z
|
160.20
|
152.00
|
11.1
|
90
|
40
|
20
|
|
12B-1-26Z
|
166.20
|
158.04
|
11.1
|
95
|
40
|
20
|
|
12B-1-27Z
|
172.30
|
164.09
|
11.1
|
95
|
40
|
20
|
|
12B-1-28Z
|
178.30
|
170.13
|
11.1
|
95
|
40
|
20
|
|
12B-1-29Z
|
184.40
|
176.19
|
11.1
|
95
|
40
|
20
|
|
12B-1-30Z
|
190.40
|
182.25
|
11.1
|
95
|
40
|
20
|
|
12B-1-31Z
|
196.50
|
188.31
|
11.1
|
95
|
40
|
20
|
|
12B-1-32Z
|
202.50
|
194.35
|
11.1
|
95
|
40
|
20
|
|
12B-1-33Z
|
209.30
|
200.40
|
11.1
|
95
|
40
|
20
|
|
12B-1-34Z
|
214.60
|
206.46
|
11.1
|
95
|
40
|
20
|
|
12B-1-35Z
|
220.70
|
212.52
|
11.1
|
95
|
40
|
20
|
|
12B-1-36Z
|
226.80
|
218.58
|
11.1
|
100
|
40
|
20
|
|
12B-1-37Z
|
232.80
|
224.64
|
11.1
|
100
|
40
|
20
|
|
12B-1-38Z
|
238.90
|
230.69
|
11.1
|
100
|
40
|
20
|
|
12B-1-39Z
|
244.90
|
236.75
|
11.1
|
100
|
40
|
20
|
|
12B-1-40Z
|
251.00
|
242.81
|
11.1
|
100
|
40
|
20
|
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Conveyor Systems |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Curved Gear |
| Material: | Alloy |
###
|
SIMPLEX CHAIN SPROCKET NO.
|
OD
|
PD
|
B1
|
dm1
|
A1
|
D1
|
|
12B-1-8Z
|
58.00
|
49.78
|
11.1
|
31
|
30
|
12
|
|
12B-1-9Z
|
63.90
|
55.70
|
11.1
|
37
|
30
|
12
|
|
12B-1-10Z
|
69.80
|
61.64
|
11.1
|
42
|
30
|
12
|
|
12B-1-11Z
|
75.80
|
67.61
|
11.1
|
46
|
35
|
16
|
|
12B-1-12Z
|
81.80
|
73.61
|
11.1
|
52
|
35
|
16
|
|
12B-1-13Z
|
87.80
|
79.59
|
11.1
|
58
|
35
|
16
|
|
12B-1-14Z
|
93.80
|
85.61
|
11.1
|
64
|
35
|
16
|
|
12B-1-15Z
|
99.80
|
91.63
|
11.1
|
70
|
35
|
16
|
|
12B-1-16Z
|
105.80
|
97.65
|
11.1
|
75
|
35
|
16
|
|
12B-1-17Z
|
111.90
|
103.67
|
11.1
|
80
|
35
|
16
|
|
12B-1-18Z
|
117.90
|
109.71
|
11.1
|
80
|
35
|
16
|
|
12B-1-19Z
|
123.90
|
115.75
|
11.1
|
80
|
35
|
16
|
|
12B-1-20Z
|
130.00
|
121.78
|
11.1
|
80
|
35
|
16
|
|
12B-1-21Z
|
136.00
|
127.82
|
11.1
|
90
|
40
|
20
|
|
12B-1-22Z
|
142.00
|
133.86
|
11.1
|
90
|
40
|
20
|
|
12B-1-23Z
|
148.10
|
139.90
|
11.1
|
90
|
40
|
20
|
|
12B-1-24Z
|
154.10
|
145.94
|
11.1
|
90
|
40
|
20
|
|
12B-1-25Z
|
160.20
|
152.00
|
11.1
|
90
|
40
|
20
|
|
12B-1-26Z
|
166.20
|
158.04
|
11.1
|
95
|
40
|
20
|
|
12B-1-27Z
|
172.30
|
164.09
|
11.1
|
95
|
40
|
20
|
|
12B-1-28Z
|
178.30
|
170.13
|
11.1
|
95
|
40
|
20
|
|
12B-1-29Z
|
184.40
|
176.19
|
11.1
|
95
|
40
|
20
|
|
12B-1-30Z
|
190.40
|
182.25
|
11.1
|
95
|
40
|
20
|
|
12B-1-31Z
|
196.50
|
188.31
|
11.1
|
95
|
40
|
20
|
|
12B-1-32Z
|
202.50
|
194.35
|
11.1
|
95
|
40
|
20
|
|
12B-1-33Z
|
209.30
|
200.40
|
11.1
|
95
|
40
|
20
|
|
12B-1-34Z
|
214.60
|
206.46
|
11.1
|
95
|
40
|
20
|
|
12B-1-35Z
|
220.70
|
212.52
|
11.1
|
95
|
40
|
20
|
|
12B-1-36Z
|
226.80
|
218.58
|
11.1
|
100
|
40
|
20
|
|
12B-1-37Z
|
232.80
|
224.64
|
11.1
|
100
|
40
|
20
|
|
12B-1-38Z
|
238.90
|
230.69
|
11.1
|
100
|
40
|
20
|
|
12B-1-39Z
|
244.90
|
236.75
|
11.1
|
100
|
40
|
20
|
|
12B-1-40Z
|
251.00
|
242.81
|
11.1
|
100
|
40
|
20
|
Sprocket Basics
When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
size
There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.
Material
Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
Function
A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
maintain
Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.
editor by CX2023-04-04
China Wheel and Sprocket Stainless Steel Bronze Double Pitch ANSI Plate Hub with Stock Bore Key Lightweight Tooth Cast Iron Roller Chain Best Suppliers Sprockets best sprocket combination
Solution Description
Wheel And Sprocket Stainless Steel Bronze Double Pitch ANSI Plate Hub with Stock Bore Key Light-weight Tooth Forged Iron Roller Chain Best Suppliers Sprockets
wheel and sprocket
We offers customers a extensive variety Sprockets that are fabricated making use of large quality raw material
We have the knowledge on making the sprockets utilized on many cars
A Sprockets applies normally to any wheel upon which are radial projection that interact a chain passing in excess of it
Right here at Zeal we are having own gear & chopping instrument production established up for Sprockets, involute spline shafts, spline hobs, spline shafts, spline rolls straight spline shafts
Large transmission precision
Higher load ability & greatest effectiveness
Tough & dependable
Pharma equipment
Xihu (West Lake) Dis.g to attain optimum client gratification, we are engaged in presenting Sprocket Wheel. The presented sprocket wheels are created with the assist of supreme course unfinished materials. These sprocket wheels are acclaimed for their distinctive quality & extended existence. Our buyers can get the whole assortment of sprocket wheels from us with customization facility and diverse dimensions in accordance to the customer’s requirements.
|
US $1-99 / Piece | |
100 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $1-99 / Piece | |
100 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
How to Identify a Sprocket
When choosing a sprocket, you have several options. There are several types, each with unique features. In this article, we’ll discuss how to identify sprockets, and how to replace worn or damaged sprockets.
buy sprockets
When building a bicycle, sprockets are an important part of the drivetrain. Unfortunately, they’re hard to find outside of places like CZPT. Fortunately, there are some easy ways to find the right sprocket for your bike.
The first thing to consider is what kind of sprocket you need. Choosing the wrong sprocket can damage your equipment or cause it to fail prematurely. While sprockets come in a variety of sizes, there are some key features that can help you find the right one.
There are two basic types of sprockets. You can choose one made of steel or aluminum, or a combination of both. Most sprockets are made of steel, but there are also new aluminum sprockets that are similar to steel and last as long as steel. No matter which material you choose, it’s important to choose a reputable manufacturer with regular maintenance.
Buying sprockets that match your chain is another way to ensure proper installation. The chain goes through the sprockets thousands of times per minute, so the teeth eventually wear out. Poorly maintained sprockets can also cause “hook” teeth, which will cause your chain to stretch to the point where you can no longer adjust it.
Identify sprockets
One of the most common bicycle parts is the sprocket, which can be identified by its width and number of teeth. A single sprocket has one tooth along its circumference, while a double sprocket has two rows of teeth. Sprockets are also known by different names, including single, double, triple, and quadruple sprockets.
Roller sprockets are another type of sprocket. It runs along a chain of rollers connected by pins. It fits into the gap between the rollers in the chain to transfer kinetic energy. There are two basic styles of roller sprockets: single pitch and double pitch. Single-pitch sprockets are small and fit snugly against the equipment, while double-pitch sprockets are larger and require more thickness to support the weight.
Checking a sprocket is easy if you know how to count teeth. A simple caliper will allow you to easily find sprockets with worn teeth. Calipers also allow you to measure the hole of the sprocket, which is the inside diameter of the sprocket.
Another way to tell if a sprocket is worn is to visually inspect the sprocket. Worn sprockets can cause the chain to bounce, putting more pressure on the bearings and accelerating wear. It is also important to check the alignment of the sprockets. If it’s off center, it probably means the chain needs to be replaced.
Replace sprocket
If you want to maintain your bike, it’s a good idea to replace your chain and sprockets regularly. If you don’t, you may have a problem that will only get worse. Worn chains can also make noise, so it’s a good idea to check them regularly. Also, you should lubricate and tighten them regularly, especially when they reach their maximum mileage.
First, you need to determine the size of the chain. Usually, you’ll find it in the manual. Common sizes are 520, 525, and 530. The first number refers to the pitch of the chain, which is the distance between the rivets, while the second number refers to the width of the sprocket. For example, a 20-tooth sprocket is two and a half inches wide.
Replacing a sprocket is a relatively simple process. Be sure to clean the bike and apply wheel bearing grease before tackling the task. Next, remove the old chain from the rear wheel. Some bikes may have clevises or side panels that need to be removed. A flat-blade screwdriver works well for this problem. You can also use the Broken Links tool to remove split links.
You can also install new sprockets on your bike. After removing the old one, be sure to follow the manufacturer’s instructions for chain and sprocket size. You should also tighten the sprocket nut to the manufacturer’s torque setting. Once you’ve done this, be sure to check the chain tension to make sure it’s not too loose or too tight.
Replace worn chains
To prevent damage to the chain, the chain must be replaced regularly. It’s prone to wear and tear, but you can extend the life of your bike’s chain with a few simple steps. One of the steps is to lift the rear wheel of the bike so you can run the new chain through the rear derailleur. This will make the task easier because your bike won’t be lying on the floor. If you don’t have a bike rack, you can use cinder blocks, wood, or boxes to support your bike rack.
The most obvious sign is yIf your chain bounces under load, our chainrings need to be replaced. Using a chain gauge will let you know when you need a new chain. Chain gauges usually consist of two sides and are used to measure the amount of wear on the chain under a given load. You can check the gauge by placing it on the chain and making sure it sinks into the chain.
First, you need to delete the old chain. Some older chains use uniform pins that you can use to replace them. Make sure to get a chain that is the same length as the old one. Also, pay attention to the type of drivetrain your bike has. For example, if it has a rear derailleur, you will need a chain that matches the same drivetrain.
Check the sprocket for rust
One of the best ways to check your bike for rust is to look for surface rust. This is the first sign that the metal is starting to oxidize. Using a steel brush to remove surface rust is a good idea, but be sure to wear safety glasses. You can also clean the sprockets with WD-40 or kerosene.
Another indicator that a sprocket needs to be replaced is excessive wear. This may be caused by foreign objects conveyed by the chain. It may also be necessary to center the chain and drive sprocket and install guide rollers. Other signs of sprocket rust include excessive vibration due to improperly machined axle holes or a bent or bent chain.
You should also look for any kinks in the chain. If so, you may need to replace the chain. Also, look for any rust spots and excess grease. Also, you should check the sprockets to make sure they are properly aligned.
Besides rust, another sign of rust is the chain jumping out of the sprocket. This can cause the chain to jam and cause your bike to slip. This situation is also dangerous for you and other drivers.
Replace worn sprockets
You can repair your bike’s gears by replacing the sprockets. You should always check the chain for any signs of wear. In the case of a worn sprocket, you should check the teeth, which are usually tall and hooked.
If the sprocket is curled, skewed, or uneven, the sprocket is worn and needs to be replaced. If the sprockets are not replaced, they will wear out the chain very quickly. Chains should be replaced as soon as they show signs of excessive wear.
To replace a worn sprocket, you must first remove the old rear sprocket. To do this, loosen the bolts that hold the sprocket in place. You should also clean the hub surface with steel wool to reduce corrosion and wear.
Worn sprockets have worn teeth that keep the roller chain from slipping. This can cause the chain to climb up the sprockets and make a lot of noise. In addition to noise, chains can stick to worn sprockets and damage sprockets and chain. Don’t wait until the chain is out of control to fix it.
After the sprocket is removed, the rear sprocket and drive sprocket can be replaced. It is important to check the alignment of the sprockets, as incorrect alignment can cause premature chain wear. Proper alignment will distribute the load evenly across the entire width of the chain, extending the life of the chain. You can check the sprocket with a ruler or laser sight tool.
editor by czh 2023-01-25
China Excavator Roller Chain Front Idler E320 Sprocket with High Quality chain sprocket price
Solution Description
Excavator roller chain entrance idler E320 sprocket with high high quality
>> Item Description
|
Merchandise Title |
excavator roller chain front loafer E320 sprocket with higher high quality |
|
Merchandise Information |
undercarriage areas |
|
Material |
SCMn3A |
|
End |
Smooth |
|
Shades |
Black or yellow |
|
Approach |
Forging & casting |
|
Area Hardness |
HRC48-54,deepth:4mm-10mm |
|
Guarantee time |
fifteen |
QINDING Manufacturers a wide selection of Undercarriage Parts & Components which includes:
- Observe Chains (Regular, Weighty Obligation & “PPR” Sequence)
- Cast and Solid Generate Segments
- Generate Sprockets
- Idlers
- Lower Rollers
- Carrier Rollers
- Monitor Tensioning Assemblies and Parts
- Heavy Duty Forestry Roller and Loafer
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Type: | Crawler |
|---|---|
| Application: | Bulldozer |
| Condition: | New |
| Transport Package: | Cartons, Wooden Cases |
| Specification: | Uesd for wheel loader |
| Trademark: | QINDING |
###
| Customization: |
Available
|
|---|
###
|
Product Name |
excavator roller chain front idler E320 sprocket with high quality |
|
Product Information |
undercarriage parts |
|
Material |
SCMn3A |
|
Finish |
Smooth |
|
Colors |
Black or yellow |
|
Technique |
Forging & casting |
|
Surface Hardness |
HRC48-54,deepth:4mm-10mm |
|
Warranty time |
1500-2000 workings hours |
|
Certification |
ISO9001-9002 |
|
MOQ |
1 pieces Bulldozer Front Idler |
|
Delivery Time |
Within 30 days after contract established |
|
Package |
Fumigate seaworthy packing |
|
Payment Term |
(1) T/T, 30% in deposit, balance on the receipt of copy of B/ |
|
|
(2) L/C, Irrevocable letter of credit at sight. |
###
 |
Melon Deng —————- Sales Manager QINDING MACHINERY & TOOLS (SHANDONG) CO., LTD. |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Type: | Crawler |
|---|---|
| Application: | Bulldozer |
| Condition: | New |
| Transport Package: | Cartons, Wooden Cases |
| Specification: | Uesd for wheel loader |
| Trademark: | QINDING |
###
| Customization: |
Available
|
|---|
###
|
Product Name |
excavator roller chain front idler E320 sprocket with high quality |
|
Product Information |
undercarriage parts |
|
Material |
SCMn3A |
|
Finish |
Smooth |
|
Colors |
Black or yellow |
|
Technique |
Forging & casting |
|
Surface Hardness |
HRC48-54,deepth:4mm-10mm |
|
Warranty time |
1500-2000 workings hours |
|
Certification |
ISO9001-9002 |
|
MOQ |
1 pieces Bulldozer Front Idler |
|
Delivery Time |
Within 30 days after contract established |
|
Package |
Fumigate seaworthy packing |
|
Payment Term |
(1) T/T, 30% in deposit, balance on the receipt of copy of B/ |
|
|
(2) L/C, Irrevocable letter of credit at sight. |
###
|
Melon Deng —————- Sales Manager QINDING MACHINERY & TOOLS (SHANDONG) CO., LTD. |
How to choose the right sprocket
Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.
Long Through Hole
Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.
face width
The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.
diameter
One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.
hub type
The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.
HZPT ZTB series
ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
set screw
Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.
editor by czh 2023-01-04
China Stainless Steel SS304 Roller Chain Sprocket with Finished Bore Pilot Bore sprocket dropship
Item Description
Solution Description
Chain sprocket
With far more than 15 years’ expertise, substantial-precision products and rigorous management system, CIMO can provide sprockets for you with secure quality and best provider.
| Product | Sprocket |
| Regular | DIN, KANA, ANSI, ISO, and so forth |
| Materials | C45, stainless metal SS304 & SS316, Cast iron, and so on |
| Bore | Pilot bore, finished bore, taper bore |
| Floor Remedy | Black oxided, Zinc plated, Electrophoresis, and so forth |
| Heat remedy | Teeth inductive hardened HRC45-fifty |
| Procedure | Forging, Chopping, Hobbing teeth, CNC Lathe machining |
| European Sort | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Type | twenty five, 35, forty, fifty, sixty, 80, one hundred, a hundred and twenty, one hundred forty, a hundred and sixty, 200, 240 |
|
Taper bore sprockets |
|
| Finished bore sprockets | |
|
Loafer sprockets with ball bearing |
|
|
Double simplex sprockets |
|
|
Sprockets with split taper bushings |
|
|
Sprockets with QD bushings |
|
| Double sprockets for 2 single chains | |
|
Double pitch sprockets |
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
In depth Images
Workshop
Packaging & Shipping and delivery
Export wood box
FAQ
Q1: Are you investing business or company ?
A: We are manufacturing facility.
Q2: How extended is your shipping time and cargo?
one.Sample Lead-instances: ten-20 times
2.Generation Direct-moments: thirty-45 times following order confirmed.
Q3: What is your rewards?
1. The most competitive cost and very good quality.
two. Ideal complex engineers give you the best help.
three. OEM is offered.
|
US $1-6 / Piece | |
50 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Chain |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Sprocket |
| Material: | Steel C45 |
###
| Customization: |
Available
|
|---|
###
| Item | Sprocket |
| Standard | DIN, KANA, ANSI, ISO, etc |
| Material | C45, stainless steel SS304 & SS316, Cast iron, etc |
| Bore | Pilot bore, finished bore, taper bore |
| Surface Treatment | Black oxided, Zinc plated, Electrophoresis, etc |
| Heat treatment | Teeth inductive hardened HRC45-50 |
| Process | Forging, Cutting, Hobbing teeth, CNC Lathe machining |
###
| European Type | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Type | 25, 35, 40, 50, 60, 80, 100, 120, 140, 160, 200, 240 |
|
Taper bore sprockets
|
|
| Finished bore sprockets | |
|
Idler sprockets with ball bearing
|
|
|
Double simplex sprockets
|
|
|
Sprockets with split taper bushings
|
|
|
Sprockets with QD bushings
|
|
| Double sprockets for two single chains | |
|
Double pitch sprockets
|
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
|
US $1-6 / Piece | |
50 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Chain |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Sprocket |
| Material: | Steel C45 |
###
| Customization: |
Available
|
|---|
###
| Item | Sprocket |
| Standard | DIN, KANA, ANSI, ISO, etc |
| Material | C45, stainless steel SS304 & SS316, Cast iron, etc |
| Bore | Pilot bore, finished bore, taper bore |
| Surface Treatment | Black oxided, Zinc plated, Electrophoresis, etc |
| Heat treatment | Teeth inductive hardened HRC45-50 |
| Process | Forging, Cutting, Hobbing teeth, CNC Lathe machining |
###
| European Type | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Type | 25, 35, 40, 50, 60, 80, 100, 120, 140, 160, 200, 240 |
|
Taper bore sprockets
|
|
| Finished bore sprockets | |
|
Idler sprockets with ball bearing
|
|
|
Double simplex sprockets
|
|
|
Sprockets with split taper bushings
|
|
|
Sprockets with QD bushings
|
|
| Double sprockets for two single chains | |
|
Double pitch sprockets
|
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
How to choose the right sprocket
Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.
Long Through Hole
Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.
face width
The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.
diameter
One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.
hub type
The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.
HZPT ZTB series
ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
set screw
Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.
editor by czh 2022-12-14
China Yassian Machinery Wheel D5 Bulldozer Rubber Track Roller Chain Sprocket with High Quality sprocket adapter
Merchandise Description
FAQ
one.If I only know the excavator model, but can not offer areas No., what must I do ?
If achievable, you can ship us images of aged goods, nameplate or the measurement for reference.
two.How can I spend the purchase?
We can get payment by means of T/T, Western Union, Paypal(for tiny quantity)
3.When will get the products after I spot purchase?
When your payment is verified, we will set up the items inside of 24 several hours if not in inventory , we will tell you before positioning the buy.
four.How can I do if there is some thing mistaken with the products?
Initial of all , I have self confidence in the quality of our goods ,if you genuinely identified something wrong ,pls give photographs for us and we will check. After it is confirmed, pls return to us , we will offer you the correct item.
five.What is your principal items ?
We are specialized in the excavator spare components, these kinds of as vacation motor gearbox/ass’y/components, swing gearbox/ass’y/motor/components, hydraulic pump assy/areas and gear components. If you need to have other excavator areas, we also can offer as your requirements
|
US $10-50 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Video Technical Support, Online Support |
|---|---|
| Warranty: | 2 Year |
| Type: | Crawler Excavator |
| Usage: | Special Excavator, Marine Excavator, Mining Excavator, GM Excavator |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
|
US $10-50 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Video Technical Support, Online Support |
|---|---|
| Warranty: | 2 Year |
| Type: | Crawler Excavator |
| Usage: | Special Excavator, Marine Excavator, Mining Excavator, GM Excavator |
| Transmission: | Hydraulic Transmission |
| Drive Type: | Internal Combustion Drive |
Choosing the Right Chain Sprocket For Your Bike
When deciding which chain sprocket to buy, you should be aware of how they fit on the bike. These sprockets are often secured to the bike’s shaft by either one or more set screws. ANSI standards for sprocket keyways provide the proper dimensions for a given shaft diameter. However, they aren’t universal and might not apply to all applications. As a result, it is important to consult a supplier who is familiar with the exact keyway dimensions.
Roller chain sprocket
A Roller chain sprocket is a gear with toothed rollers. The tooth profile determines the arc length of the roller. A roller with an undercut tooth profile will not transmit movement properly. For this reason, the pitch line of the roller should be equal to the incremental circle length (r) divided by the number of teeth.
The chain sprocket is available in various types. They can be used in conveyor chains. They are usually available as ready-to-mount units. Finished bores and wide hubs are available for mounting them. They are also available with a roller-bearing design.
The teeth of sprocket wheels are derived from the involute-trochoid curve. In order to engage with these teeth, the roller chain must be sufficiently accurate to avoid backlash. However, conventional roller chains can also engage with these teeth. However, this cannot eliminate backlash completely. This is why the invention provides means for reducing the friction between the teeth and the roller. This also increases the life span of the roller-and-sprocket transmission.
In terms of standards, the ANSI standard is widely used in the industry. It accounts for nearly 15% of the market in Europe and holds an advantage over the ISO standards. In North America, manufacturers of sprockets follow the ANSI code B 29.1. The ANSI code provides clear design guidelines and allows for interchangeability among different types.
There are many considerations to make when selecting a sprocket. A key factor is the transmission input. For example, if the transmission has a high horsepower, the center distance between the large and small sprockets is smaller. To compensate for this, a chain with a smaller pitch may be appropriate. Also, if the transmission has a high horsepower ratio, a multiple-strand drive is a viable option.
If you’re looking for a quality roller chain sprocket, you should check out MDS. They stock a wide range of types and sizes for a variety of industrial machinery.
Gap-tooth sprocket
A gap-tooth chain sprocket has tooth-head heights greater than the ISO tooth form height. This ensures that the pins and rollers meet at a point near the tooth head, and eliminates pulsating movement and intermittent changes in speed.
The front and rear surfaces of the sprocket are convex arcs, with radii equal to each other and the center of the tooth gap bottom. This allows for a uniform pitch and reduced friction. The tooth-face height of a gap-tooth chain sprocket is equal to the pitch of the chain, while the radii of its tooth-faces are larger than that of an ISO tooth-form.
One form of gap-tooth chain sprocket has four teeth at regular intervals. The teeth are interconnected by arc-shaped tooth gap bottoms. The resulting chain pitch is called the chain pitch. The gap-tooth sprocket can be used on various types of wheels.
ISO 606 1994 (E) defines the standard chain length, while Japanese Industrial Standards (JIS B 1801) define the standard tooth form. The ISO and Japanese Industrial Standards define two different tooth forms, namely S-tooth and U-tooth. The ISO and Japanese Industrial Standard tooth forms have different tooth pitches, but the root diameter of both forms is the same. The distance between each tooth is measured from the pitch polygon.
The tooth gap bottom circle of the gap-tooth sprocket gradually contacts the surface of the front tooth in the opposite side of the tooth gap. As this process continues, the tooth surface of the gap-tooth sprocket moves closer to the tooth head. This reduces the impact, which results in less noise.
The gap-tooth chain sprocket is an ideal solution for many applications. It allows the chain to disengage easily. With the same frequency, the teeth of the sprocket also help in regulating vibration. A sprocket with short teeth will be easier to disengage when necessary.
Another popular style of gap-tooth chain sprocket is the random polygon 64. The random polygon is a quadrilateral. Each vertex of the quadrilateral is assigned to one of the four consecutive pins on the uniform chain. The four consecutive pins are aligned in a gap-tooth pattern.
Steel split sprocket
Split sprockets are perfect for large portions of the drive system, as they can be installed without disassembling the entire shaft assembly. These sprockets are also useful in applications where there is limited workspace. They can be installed without disassembling the entire shaft assembly, minimizing the risk of damage to the conveyor system and reducing downtime.
There are several different types of split sprockets, including mat chains and table chains. Each type differs in bore diameter, number of teeth, block body style, and abrasion resistance. Some are made from steel, while others are made from a non-split material.
Split sprockets are available from many manufacturers. Typically, the split sprockets are made with two pieces of steel, which are then joined together again. This assembly technique is a cost-effective way to mount sprockets on a shaft. These sprockets can be stocked in multiple sizes and keyways.
Stainless Steel sprockets are available in stock and custom configurations. They are designed to last for years to come. These sprockets are suitable for conveyors, power transmission systems, and robotics. In addition, these sprockets offer heightened quality and durability. Some of these sprockets feature a bevel or spiral bevel gear, while others are made from helical gear.
Split sprockets are available in a variety of sizes. For instance, the RCS-03 is a plain bore type, while the RCS-04 is a finished bore type. Split sprockets are available with a split taper bushed design. They are also available with either single or multiple strands.
Double-duty sprocket
If you are looking for a heavy-duty chain sprocket, you have many choices. They come in different sizes, shapes, and materials. Some have wide teeth while others have narrow teeth. You should choose a sprocket that has the correct tooth pitch for your chain’s pitch diameter. You should also pay attention to the sprocket’s bore, or the hole in its center through which the drive shaft passes.
The type of transmission will also determine the type of sprocket you need. High-power transmissions, for example, require higher-pitch sprockets than lower-pitch models. To make sure that you choose the right sprocket for your application, check the horsepower and pitch of your transmission. If you have a low-pitch transmission, choose a smaller chain pitch. High-horsepower transmissions may also require multiple-strand drive.
There are different standards for sprockets, but ANSI standards are widely accepted. For instance, ANSI code B 29.1 requires sprockets to have two teeth per chain pitch, whereas ISO standards call for three. The double-duty sprocket, on the other hand, engages every other tooth. This helps the sprocket’s lifespan.
There are many different sprockets, and each has different performance characteristics. Generally, sprockets are made of metal or reinforced plastic and are similar to bicycle gears in their wheel-shaped design. Different types of chain sprockets have different teeth and work with different types of chains. The design of the chain and sprocket also determines the type of sprocket needed.
One popular type of double-duty sprocket is the steel-split sprocket. Its pitch is half the pitch of the chain and is usually referred to as a ‘double-duty’ sprocket. It is often used for heavy-duty purposes, as it distributes the load evenly on the chain.
While sprockets come in different tooth pitches and diameters, the recommended number of teeth is 17. The more teeth on the sprocket, the longer it will last. The height of the teeth is also important. A sprocket with more teeth will increase the life of the chain.
editor by czh 2022-12-13
China Finished Bore Roller Chain Sprocket with Keyway app sprocket
Solution Description
Merchandise Description
Chain sprocket
With much more than 15 years’ experience, large-precision gear and rigorous management technique, CIMO can give sprockets for you with steady good quality and best services.
| Product | Sprocket |
| Standard | DIN, KANA, ANSI, ISO, and many others |
| Substance | C45, stainless metal SS304 & SS316, Solid iron, and many others |
| Bore | Pilot bore, completed bore, taper bore |
| Floor Treatment method | Black oxided, Zinc plated, Electrophoresis, and many others |
| Warmth treatment method | Teeth inductive hardened HRC45-fifty |
| Method | Forging, Cutting, Hobbing tooth, CNC Lathe machining |
| European Variety | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Variety | twenty five, 35, forty, fifty, sixty, eighty, a hundred, a hundred and twenty, one hundred forty, 160, two hundred, 240 |
|
Taper bore sprockets |
|
| Finished bore sprockets | |
|
Idler sprockets with ball bearing |
|
|
Double simplex sprockets |
|
|
Sprockets with split taper bushings |
|
|
Sprockets with QD bushings |
|
| Double sprockets for 2 single chains | |
|
Double pitch sprockets |
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
In depth Pictures
Workshop
Packaging & Shipping and delivery
Export picket box
FAQ
Q1: Are you trading business or maker ?
A: We are manufacturing unit.
Q2: How extended is your supply time and shipment?
1.Sample Lead-instances: 10-20 days
two.Manufacturing Lead-times: 30-forty five times soon after buy confirmed.
Q3: What is your rewards?
1. The most aggressive price and great quality.
2. Perfect technological engineers give you the best assistance.
3. OEM is offered.
|
US $1-6 / Piece | |
50 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Chain |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Sprocket |
| Material: | Steel C45 |
###
| Customization: |
Available
|
|---|
###
| Item | Sprocket |
| Standard | DIN, KANA, ANSI, ISO, etc |
| Material | C45, stainless steel SS304 & SS316, Cast iron, etc |
| Bore | Pilot bore, finished bore, taper bore |
| Surface Treatment | Black oxided, Zinc plated, Electrophoresis, etc |
| Heat treatment | Teeth inductive hardened HRC45-50 |
| Process | Forging, Cutting, Hobbing teeth, CNC Lathe machining |
###
| European Type | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Type | 25, 35, 40, 50, 60, 80, 100, 120, 140, 160, 200, 240 |
|
Taper bore sprockets
|
|
| Finished bore sprockets | |
|
Idler sprockets with ball bearing
|
|
|
Double simplex sprockets
|
|
|
Sprockets with split taper bushings
|
|
|
Sprockets with QD bushings
|
|
| Double sprockets for two single chains | |
|
Double pitch sprockets
|
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
|
US $1-6 / Piece | |
50 Pieces (Min. Order) |
###
| Standard Or Nonstandard: | Nonstandard |
|---|---|
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery, Chain |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Cut Gear |
| Toothed Portion Shape: | Sprocket |
| Material: | Steel C45 |
###
| Customization: |
Available
|
|---|
###
| Item | Sprocket |
| Standard | DIN, KANA, ANSI, ISO, etc |
| Material | C45, stainless steel SS304 & SS316, Cast iron, etc |
| Bore | Pilot bore, finished bore, taper bore |
| Surface Treatment | Black oxided, Zinc plated, Electrophoresis, etc |
| Heat treatment | Teeth inductive hardened HRC45-50 |
| Process | Forging, Cutting, Hobbing teeth, CNC Lathe machining |
###
| European Type | 03B, 04B, 05B, 06B, 081B, 083B/084B, 085B, 086B, 08B, 10B, 12B, 16B, 20B, 24B, 28B, 32B |
| American Type | 25, 35, 40, 50, 60, 80, 100, 120, 140, 160, 200, 240 |
|
Taper bore sprockets
|
|
| Finished bore sprockets | |
|
Idler sprockets with ball bearing
|
|
|
Double simplex sprockets
|
|
|
Sprockets with split taper bushings
|
|
|
Sprockets with QD bushings
|
|
| Double sprockets for two single chains | |
|
Double pitch sprockets
|
C2042, C2052, C2062, C2082, C2040, C2050, C2060, C2080 |
| Platewheels for Conveyor chain | 20x16mm, 30×17.02mm |
How to Use Sprocket for Conversion Optimization
The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
Typical sprocket
Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.
Function
Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
element
Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
Put on
Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.
editor by czh 2022-12-02