China Hot selling Best Price Brass Helical or Super Gear Chinese Manufacturer POM High Precision Plastic Sprockets Gear

Product Description

OEM CNC Machinery Wholesale Double Spur Gear Part Fabrication Plastic Gears for Toys

Product Description

1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

Detailed Photos

 

Product Parameters

Our advantage of cnc machining:

Business Type Beyond the Manufacturer and strong organized ability in the industrial
Benefits 1. Deeper industrial experience at CNC machining parts service for more than 10-years,our customer’s requirement is our 1st priority.
2. 2D or 3D files is available;
3. We trust the quality priority and we insist the good quality should be based on the customers’ satisfied;
4. Without any MOQ requirement;
5.Faster delivery time;
6. Customized size and specification /OEM available
7. Near ZheJiang Port

The material

Material System Material Composition Typical Applications
Low Alloy Steel Fe-2Ni , Fe-8Ni Automobile,machinery and other industries,particularly in structural parts
Stainless Steel 316L,17-4PH,420,440C Medical equipments, clocks,watches
Carbide WC-Co Various tools,clocks,watches
Ceramic Al2O3 ,ZrO2 ,SiO2 IT electronics, daily necessities,watches
Heavy Alloys W-Ni-Fe,W-Ni-Cu,W-Cu The arms industry, communications,daily necessities
Titanium Ti,Ti-6Al-4V Medical and firearm structural parts
Magnetic Materials Fe,NdFeB,SmCo5,Fe-Si Magnetic properties of the various components
Tool Steel CrMo4,M2 Tools

 

Table 2 Typical properties of several MIM materials:          
Materials Density Hardness Tensile Strength Elongation
g/cm³ Rockwell Mpa %
Fe-based alloys MIM-2200(Sintered) 7.65 45HRB 290 40
MIM-2700(Sintered) 7.65 69HRB 440 26
MIM-4605(Sintered) 7.62 62HRB 415 15
MIM-4605(Quenching and tempering) 7.62 48HRC 1655 2
Stainless steel MIM-316L(Sintered) 7.92 67HB 520 50
MIM-17-4PH(Sintered) 7.5 27HRC 900 6
MIM-17-4PH(Sintered) 7.5 40HRC 1185 6
MIM-430L(Sintered) 7.5 65HRB 415 25
Tungsten alloys 95%W-Ni-Fe 18.1 30 960 25
97%W-Ni-Fe 18.5 33 940 15
Carbide YG8X 14.9 HRA90 Bending Strength 2300  
Fine Ceramics Al2O3 3.98 HRA92 Bending Strength 2300  

 

Packaging & Shipping

 

  1. We prefer DHL or TNT express or other air freight between 1kg-100kg.
  2. we prefer sea freight more than 100kg or more than 1CBM
  3. As per customized specifications.

 

Company Profile

About us
HangZhou CZPT Technology Co.,Ltd is located in HangZhou City, ZheJiang  Province, Which closed the ZheJiang .The Emitech Technology is mainly engaged in the CNC Machinery Industrial Service for 15 years. Our Parts are sold to Europe, America, Japan, South Korea and China in various kinds of industrial.At present, Our company has CNC Turning machines and CNC centers and equip with professional quality and testing instruments.We have full OEM Experience from worldwide, providing them with One-stop solutions for a broad range of applications.We look CZPT to cooperating with you!
 

 

Our Advantages

1. Precision CNC machining parts strictly follow customer’s drawing,packing and quality requirement.
2. Tolerance: between+/-0.01mm;
3. The high-tech CMM inspector to ensure the quality;
4. Full-Experienced engineers and well professional trained workers;
5. Fast delivery time;
6. Professional advice for our customers; 

After Sales Service

Custom CNC machining Services brass aluminium stainless steel cnc parts
We usually provide 12 Months repair service. If our duty, we will respond to send the new parts.

Our Service

 

Our Processing CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish Polishing, sandblasting,Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance 0.05mm~0.1mm
QC System 100% inspection before shipment
Drawing format CAD / PDF/ DWG/ IGS/ STEP
Packaging Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms EXW, FOB, CIF, As per the customer’s request
Shipment Terms

1)We prefer DHL or TNT express or other air freight between 1kg-100kg.

2) we prefer sea freight more than 100kg or more than 1CBM
3) As per customized specifications.

Note The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

After-sales Service: Repaire
Warranty: Half a Year
Condition: New
Certification: CE, RoHS, GS, ISO9001
Standard: DIN, ASTM, GOST, GB, JIS, ANSI, BS
Customized: Customized
Customization:
Available

|

Customized Request

sprocket gear

How do I properly install and align sprocket gears?

Proper installation and alignment of sprocket gears are crucial to ensure smooth and efficient power transmission and to prevent premature wear. Here are the steps to properly install and align sprocket gears:

1. Gather the Required Tools:

Before starting the installation process, gather all the necessary tools, including a torque wrench, measuring tools (calipers or micrometers), leveling tools, and alignment tools.

2. Clean the Components:

Thoroughly clean the sprocket gears and the shafts on which they will be mounted. Remove any dirt, debris, or old lubricant to ensure proper contact between the components.

3. Check for Damage:

Inspect the sprocket gears for any signs of damage, wear, or deformation. If any issues are found, replace the damaged components before proceeding.

4. Ensure Proper Fit:

Ensure that the bore diameter of the sprocket gear matches the diameter of the shaft on which it will be mounted. The fit should be neither too loose nor too tight, and the keyway (if present) should align properly with the key on the shaft.

5. Align Sprocket Gears:

For chain and sprocket systems, align the sprocket gears precisely with each other. The teeth of the driving and driven sprockets should mesh smoothly with the chain. For belt drive systems, ensure the sprocket gears align with each other and the belt tracks properly within the sprockets.

6. Check Axial Alignment:

Ensure that the sprocket gears are axially aligned with each other and perpendicular to their respective shafts. Any misalignment can cause premature wear and noise during operation.

7. Set Tension:

If using a chain and sprocket system, adjust the tension of the chain to the manufacturer’s specifications. Proper tension ensures optimal power transmission and extends the life of both the chain and sprocket gears.

8. Lubricate:

Apply the appropriate lubricant to the sprocket gear teeth and the chain or belt as required. Lubrication reduces friction, heat, and wear during operation.

9. Torque Fasteners:

If the sprocket gears are held in place with fasteners (such as set screws or bolts), torque them to the recommended specifications. This ensures that the sprocket gears are securely attached to the shafts and will not slip during operation.

10. Perform a Trial Run:

After installation, run the system at low speed and observe its performance. Check for any unusual noise, vibration, or misalignment. If any issues are detected, stop the system immediately and address the problem.

Following these steps will help ensure that the sprocket gears are properly installed and aligned, leading to reliable and efficient power transmission in your mechanical system.

sprocket gear

Can sprocket gears be used in underwater applications?

Yes, sprocket gears can be used in underwater applications with certain considerations. While sprocket gears are commonly used in various mechanical systems on land, their application underwater introduces additional challenges due to the aquatic environment’s unique conditions. Here are some key factors to consider when using sprocket gears in underwater applications:

1. Corrosion Resistance: Exposure to water can lead to corrosion of the sprocket gear and other components. Therefore, it’s crucial to use materials that offer excellent corrosion resistance. Stainless steel, brass, bronze, or other non-corrosive alloys are commonly used choices.

2. Waterproof Sealing: Ensure that the mechanical assembly is effectively sealed to prevent water ingress. Proper seals, gaskets, and O-rings should be used to keep water away from the critical components, reducing the risk of damage and maintaining the gear’s performance.

3. Lubrication: Underwater applications require special consideration for lubrication. Standard lubricants may wash away or degrade underwater, leading to increased friction and wear. Specialized waterproof or marine-grade lubricants are necessary to maintain smooth operation and prevent corrosion.

4. Material Selection: Choose materials not only for corrosion resistance but also for their ability to withstand the hydrostatic pressure at the specific underwater depth where the sprocket gear will be used.

5. Environmental Factors: Consider other environmental factors, such as temperature variations, salinity, and presence of debris or marine life, which may affect the sprocket gear’s performance and longevity.

6. Load and Speed: Understand the specific load and speed requirements of the underwater application to ensure the sprocket gear can handle the conditions effectively.

7. Regular Inspection: Implement a proactive maintenance program with regular inspections to identify any signs of wear, corrosion, or damage. Promptly address any issues to prevent equipment failure.

By carefully considering these factors and selecting appropriate materials and designs, sprocket gears can be successfully used in underwater applications. Whether in marine equipment, underwater robotics, or other submersible systems, proper engineering and maintenance are essential for reliable and efficient operation.

sprocket gear

What are the advantages of using a sprocket gear over other types of gears?

Sprocket gears offer several advantages over other types of gears, making them a popular choice in various mechanical systems and power transmission applications. Here are the key advantages:

  1. Efficient Power Transmission: Sprocket gears, when used with chains or belts, provide an efficient means of power transmission over long distances. The engagement of teeth in a sprocket gear and the chain or belt ensures a positive drive, minimizing power losses and maximizing efficiency.
  2. High Gear Ratios: Sprocket gears can achieve high gear ratios in a compact design, allowing for significant speed reduction or amplification. This makes them suitable for applications that require precise speed control and torque conversion.
  3. Simple and Cost-Effective: Sprocket gears are relatively simple in design, making them cost-effective to manufacture and maintain. They consist of a circular disc with teeth around the circumference, which can be readily machined or cast.
  4. Easy Installation and Replacement: Sprocket gears are easy to install and replace, especially in chain-driven systems. Changing a sprocket gear requires minimal downtime, making maintenance and repairs more convenient.
  5. Flexible Design Options: Sprocket gears come in various sizes, tooth profiles, and materials, providing flexibility in design to suit different applications. They can be custom-made to match specific requirements.
  6. High Load Capacity: Sprocket gears, particularly those made from durable materials, can handle high loads and transmit significant power without experiencing premature wear or failure.
  7. Quiet and Smooth Operation: When paired with well-lubricated chains or belts, sprocket gear systems can operate quietly and smoothly, reducing noise and vibration levels in the mechanical system.
  8. Wide Range of Applications: Sprocket gears find applications in various industries, including automotive, machinery, robotics, agricultural equipment, and more. They are suitable for both heavy-duty and light-duty systems.
  9. Excellent for High-Speed Applications: In high-speed applications, sprocket gears offer reliable performance with minimal heat generation due to their positive engagement with chains or belts.

While sprocket gears offer numerous advantages, their selection should consider specific application requirements, load conditions, operating environment, and other factors to ensure optimal performance and longevity.

China Hot selling Best Price Brass Helical or Super Gear Chinese Manufacturer POM High Precision Plastic Sprockets Gear  China Hot selling Best Price Brass Helical or Super Gear Chinese Manufacturer POM High Precision Plastic Sprockets Gear
editor by CX 2023-12-11