China Pulsar 150/180cc 44/15t Platina 100cc 42-14t Motorcycle Sprocket Wheel for India Market with Good quality

Merchandise Description

PULSAR one hundred fifty/180CC forty four/15T PLATINA 100CC 42-14T Bike sprocket wheel for India marketplace
Bike Sprocket Wheel, Bike Sprocket Set, Chain Sprocket, Bike Parts, Rear Sprocket, Front Sprocket, Cg125 Sprocket, Internal Sprocket, Motor Part, Motor Sprocket, Bike spare Areas, Motorbike chain wheel, bike chain, Sprocket Wheel, Sprocket
Honda:
C50, B50, C70, CD70, DAX70, MB80, C90, CD90, S90, H100, C100, C100-BIZ, CB100, CD100, MB100, XL100, S110, CB125, CD125, CG125, TITAN-ninety nine, TITAN-2000, TITAN-one hundred fifty, NX125, XL125, XLR125, GL145, CBX150, NXR150 BROS, CBX200, NX200, TRX200, XL200R, CB250, XL250, CBR250, NX250, CBX250, VT250, XL250, NX250, TRX350, CB400, CBR400, NX350SHAHAR, XLX250/350, NX200, XR250, XR200, CB250N, CD100, DAX70, NX400, XR200, XR250, XR200R, GS125
SUZUKI:
A50, GT50, RV50, A80, FR80, DS80, FR80N, RV90, A100, AX100, FB100, FR100, TS100, GP100, ER100, TS100Z, AX115, FD115, CN125, ER125, GN125, GP125, GS125, TR125, AX115, FR100, C70, C90, TS185ER, G7T
YAMAHA:
DT50, GT50, RD50, RX50, YB50, RD75, FS80, GT80, LB80, RX80, V80, YB80, AG100, DT100, DX100, RS100, RX100, YB100, DT125, DT125T, DT125K, DT125R, RD125, RZD125, RS125, SR125, TW125, TZR125, YB125, XT125, YBR125, RD135, RX135, RXZ135, DT150, SR150, DT175, DT180, MX180, RX180, XV250, DT250, SR250, XT250, DT175K 6H, DT175K 4H, TDR250, YZ125, SIGMA100, CRYPTON
KAWASAKI:
GTO125, KAZE-R, GTO110
DAELIM LIBERTY 12T X 44T
ENG DAELIM ALTINO a hundred 40T
GARELLI ESTR 10T
GILERA SMASH a hundred and ten 15T X 36T
GUERRERO Day a hundred 15T X 38T
GUERRERO FLASH 110 14T X 41T
GUERRERO GLX 14T X 56T
GUERRERO Vacation one hundred ten 14T X 36T
HERO PUCH 13T X 33T
INTRUDER/HYOSUNG TN a hundred twenty five 14T
JNG SUZUKI GS/KATANA 125
JUKI DRIB 12T
MIN C/REBORDE 9T
MIN C/REBORDE 10T
N MAX(420) 39T
N MAX one hundred(420) 15T
RZF200/ANDINA125/RB125/00(seventy seven-)/PATAG 14T
TVS 13T X 39T
XX125/RX125/RZA125/SAPUCA125
Z RX/RZA125 44T
ZAN SOL 42T
ZAN XX125 15T
ZANELLA 70(Fire Additionally) 10T
ZANELLA Because of/POCK 35T
ZANELLA Because of/POCK 38T
ZANELLA XX125/RX125/SAPUCA125
There are many objects for Austrialia, Indonesia, Malaysia, Singapore, Thailand, Philippines, India, Turkey, Sri Lanka, West African, South African industry and so on.
Your enquiry will be hugely appreciated.

 
Requirements:
Rear sprocket: 34T/35T/36T/37T/38T/39T/40T/41T/42T/43T/44T/45T/
 46T/47T/48T/49T/50T/51T/52T/53T/54T/55T/56T. and so on
Front sprocket: 13T/14T/15T/16T/17T. etc
415.420.428.428H.520 and so on
Uncooked-materials C45, A3 and many others
Heat treatment method Higher frequency heat-therapy, Carburizing warmth-therapy, and so on
Surface treatment Sand blasting, Galvanization, Electrophoresis, sprucing or as your specifications
packing Poly bag, bubble pack, blister card, vacuum forming, box or as your prerequisite
Moq 1000 pieces
positive aspects Fragile physical appearance, higher top quality, sturdy in use, competitive price tag, top quality provider
Principal industry Southeast Asia, Africa, Mid-east, South The united states, Europe
Other individuals OEM is welcomed, in addition, we can make motorbike sprocket as your samples
In addition, We are often strengthening our layout and designs to validate to the world market.

HangZhou CZPT Sector Co., Ltd. is a specialised provider of a entire assortment of chains, sprockets, gears, equipment racks, v belt pulley, timing pulley, V-belts, couplings, machined elements and so on.

Because of to our sincerity in supplying greatest support to our clients, knowing of your requirements and overriding feeling of duty towards filling buying needs, we have received the trust of purchasers throughout the world. Obtaining accrued precious encounter in cooperating with overseas consumers, our merchandise are selling well in the American, European, South American and Asian markets.Our merchandise are produced by modern computerized equipment and tools. Meanwhile, our merchandise are manufactured according to higher good quality specifications, and complying with the international innovative common requirements.

With a lot of years’ knowledge in this line, we will be dependable by our positive aspects in competitive price tag, 1-time delivery, prompt reaction, on-hand engineering assistance and very good right after-product sales solutions.

Additionally, all our manufacturing processes are in compliance with ISO9001 requirements. We also can style and make non-standard products to meet customers’ special specifications. High quality and credit history are the bases that make a corporation alive. We will provide best services and substantial top quality merchandise with all sincerity. If you need any data or samples, remember to contact us and you will have our quickly reply.

US $2-3
/ Piece
|
500 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Sand Blasting, Dull Polish, Polishing, Gold Coated, Copper Coated, Blacken
Surface: White, Black, Gold

###

Customization:

###

 
Specifications:
Rear sprocket: 34T/35T/36T/37T/38T/39T/40T/41T/42T/43T/44T/45T/
 46T/47T/48T/49T/50T/51T/52T/53T/54T/55T/56T. etc
Front sprocket: 13T/14T/15T/16T/17T. etc
415.420.428.428H.520 etc
Raw-materials C45, A3 etc
Heat treatment High frequency heat-treatment, Carburizing heat-treatment, etc
Surface treatment Sand blasting, Galvanization, Electrophoresis, polishing or as your requirements
packing Poly bag, bubble pack, blister card, vacuum forming, box or as your requirement
Moq 1000 pieces
advantages Delicate appearance, high quality, durable in use, competitive price, premium service
Main market Southeast Asia, Africa, Mid-east, South America, Europe
Others OEM is welcomed, furthermore, we can produce motorcycle sprocket as your samples
In addition, We are always improving our design and patterns to confirm to the world market.
US $2-3
/ Piece
|
500 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Sand Blasting, Dull Polish, Polishing, Gold Coated, Copper Coated, Blacken
Surface: White, Black, Gold

###

Customization:

###

 
Specifications:
Rear sprocket: 34T/35T/36T/37T/38T/39T/40T/41T/42T/43T/44T/45T/
 46T/47T/48T/49T/50T/51T/52T/53T/54T/55T/56T. etc
Front sprocket: 13T/14T/15T/16T/17T. etc
415.420.428.428H.520 etc
Raw-materials C45, A3 etc
Heat treatment High frequency heat-treatment, Carburizing heat-treatment, etc
Surface treatment Sand blasting, Galvanization, Electrophoresis, polishing or as your requirements
packing Poly bag, bubble pack, blister card, vacuum forming, box or as your requirement
Moq 1000 pieces
advantages Delicate appearance, high quality, durable in use, competitive price, premium service
Main market Southeast Asia, Africa, Mid-east, South America, Europe
Others OEM is welcomed, furthermore, we can produce motorcycle sprocket as your samples
In addition, We are always improving our design and patterns to confirm to the world market.

Problems with sprockets

If you’re having trouble with your HP Sprocket, you’re not alone. This bike component isn’t without issues, but it’s also susceptible to other wear and tear. Check for worn tooth surfaces and hooked tips. When teeth wear out quickly, they can break the chain, so make sure you fix them as soon as possible.
You can solve this issue by installing the latest firmware update for your Sprocket printer. The firmware update is designed to provide a safe and reliable printing experience. When your Sprocket printer doesn’t print the pictures, it is likely because it’s not receiving enough power from the battery. Make sure the battery is at least 25% before you begin.
Insufficient or improper lubrication can cause a variety of problems. Proper lubrication can prevent or remove excessive wear, or protect the chain from the environment. It can also reduce the risk of excessive chain slack. The following are just a few common problems that can cause slack in the chain.
In case of excessive wear, a new sprocket may be necessary. If the sprocket and chain do not match, replace them with a similar size. In addition, a shock absorber can be installed to minimize load. Another alternative is to install a take-up idler, which helps prevent excessive chain elongation.
Improper alignment of the sprocket is another common cause of chain drive problems. If the sprocket is not aligned correctly, it will not be able to move smoothly through the chain during rotation. The teeth of the sprocket will become hooked, preventing the roller from smoothly moving through. This will force the roller chain to cling to the sprocket, and need to be replaced.
sprocket

Common types of sprockets

Power transmission equipment typically utilizes sprockets and chains. These are used in pairs to provide speed reduction. They are different from gears because the teeth of the sprocket do not mesh with those of the mating gears. They are typically made of plastic, but they can also be made of metal.
There are many common types of sprockets and chains. Some of these types of sprockets have large, narrow, or variable tooth pitch. The size of the sprocket depends on the size and pitch of the chain. If you are using a chain with a large pitch diameter, you should use a sprocket with large teeth. Conversely, a smaller pitch diameter will require a sprocket with small teeth.
Another way to identify the type of sprocket you’re using is to look at the number of strands. Single-strand sprockets are the most common, but you’ll also find many types that have multiple strands of chains. Multi-strand chains are generally larger and allow for greater torque to be transmitted from a common central shaft.
Another type is flat sprockets, which have no hub and drive through a series of holes. They are used for transmission of power or material in chain-driven systems, such as bicycles. They can also be used for overhead conveyors. In some cases, there is a special type that fits the shaft of an automobile, such as a transmission shaft.
There are many different types of sprockets, each with a unique function. Some are used for conveyor chains, while others are used for other applications. In most cases, sprockets are used in chain-driven machinery. They come in different sizes and pitches and are designed to work with particular types of chains.
When choosing a motor or transmission system, it is important to match sprockets and chains. A perfectly matched set of components will ensure that the motor and transmission work together. Generally, this alignment comes down to sprocket-to-sprocket matching. The process involves jacking up the motor and lining up the sprockets and chains. Then, the sprockets and chains are locked into place with cotter pins.
sprocket

Size of sprockets

To determine the correct chain length and sprocket diameter, the first step is to understand the difference between the diameters of the sprockets and cassettes. The smaller the diameters of sprockets, the lower the chain tension. The larger the sprocket, the longer the chain will need to be. This process requires the use of a derailleur that can roll a larger number of chains.
In addition to chain length, the spacing between sprockets is another important factor. If the sprockets are too far apart, the chain may slip through the sprocket. A smaller range of sprockets will prevent this and will increase the number of discrete gear ratios. In addition, if the chain skips over a sprocket, it will cause discomfort in shifting.
Choosing the correct size of sprockets is essential for cycling. Larger sprockets are usually necessary for road bikes. Likewise, a road bike will have larger gears than a gravel bike. Larger gears will help the cyclist accelerate more smoothly and ensure a smoother ride.
Using a chain calculator can help you determine the proper size of sprockets for your bike. You can also use a chain length calculator to determine the correct chain length. This calculator uses the distance between the sprockets to calculate chain length. However, it is important to note that it is not possible to calculate the length of a chain with a single sprocket.
The size of the sprocket must be in proportion to the length of the chain. It can be controlled by either adjusting the center of the sprocket or moving it to the proper position. The center of rotation of the sprocket is defined by the chosen geometry reference.
The report covers global and regional sales of sprockets. It also contains information on competitive dynamics and market concentration status. Moreover, the report includes detailed information about the manufacturers of sprockets. The study also includes regional and global market forecasts. It also provides a detailed breakdown of sales by type, application, and region.
When choosing the right size of sprockets, remember to take measurements and do some arithmetic. For example, a smaller countershaft sprocket will improve low-speed acceleration, while a larger rear sprocket will improve fuel mileage. In addition, it is recommended that you use the reverse sprocket size if you’re going to be riding on long highways.
sprocket

Maintenance of sprockets

Proper maintenance of sprockets and chains is crucial to the functioning of your bike. It is important to avoid overstretching them. If this happens, they will not fit properly and will require replacement. It is also important to prevent the kinks in your chain to reduce the amount of stress on your sprockets.
If you are unsure of the state of your sprockets and chains, you can replace them with a new chain and a new sprocket. If you notice that a chain is squeezing between the rear sprocket, it is time to replace the sprocket.
Proper maintenance of sprockets and chains involves cleaning and lubrication. Regular cleaning and lubrication can prevent damage and extend the life cycle of these parts. Proper lubrication will also ensure their smooth operation and minimize the noise. Regardless of whether your sprockets or chains are new or used, lubrication should be carried out at regular intervals to extend their useful life cycle.
Proper alignment of the sprockets and chains will ensure the most efficient performance and reliability. If you regularly change your chain and sprockets, you can prolong the life of these components and avoid costly repairs. Make sure you change the sprockets and chains only with professional mechanics. Always follow the instructions of the motorcycle manufacturer.
Proper maintenance of sprockets and chains is important to prevent premature sprocket replacement. Changing the sprocket too often can result in poor meshing, accelerating wear and tear of the new sprockets. When changing the sprocket, it is essential to turn the worn surface over before you install the new one.
It is important to follow the instructions and warning signs for proper maintenance of sprockets and chains. The safety of the workers and the environment should be prioritized. Follow the instructions of the manufacturer and avoid dangerous situations. It is essential not to anneal or electroplate the chain parts.
Proper lubrication is also vital. Use a non-petroleum based cleaner to clean the chain thoroughly and then apply lubricant. Avoid using engine oil as it is more viscous and cannot protect the chain against water.

China Pulsar 150/180cc 44/15t Platina 100cc 42-14t Motorcycle Sprocket Wheel for India Market     with Good quality China Pulsar 150/180cc 44/15t Platina 100cc 42-14t Motorcycle Sprocket Wheel for India Market     with Good quality
editor by czh 2022-12-20