China Drag Conveyor Chain and Sprocket sprocket company

Solution Description

drag conveyor chain and sprocket

Introduction
Horizontal scraper chain conveyor is bulk material conveying tools, which is composed of head section with driving device, center casing, tail area, pressure system, as properly as scraper chains. MS buried scraper conveyor is extensively employed in cement plant, coal, metallurgy, mining, mild, construction, chemical, grain, power industries etc.

Benefits and Attributes
1.Completely enclosed framework, without having air pollution, environmental helpful.
two.Basic structure, handy installation and servicing.
3.Horizontal or slightly inclined transport, angle can be from 0° to 30°.
four.Multiple material feeding point and discharging stage according to prerequisite.
5. Trough width can be one hundred sixty-500mm to satisfy distinct materials varieties and potential.
six. Types of scraper chain, to meet different varieties of materials.
7. Conveying length is up to 80m with content temperature lower than 120ºC.
eight. With screw get-up gadget, can take-up itself automatically, to steer clear of chain take off.
9. Reducer motor manufacturer can be can be domestic or imported: Tailong,SEW,Siemens and so forth.
ten.Can be disassemble into a number of sections, preserve room for the duration of transportation.

Complex Parameter:
 

Scraper Conveyor Technical Efficiency
Type MS16 MS20 MS25 MS32 MS40
Trough Width a hundred and sixty two hundred 250 320 four hundred
Allowed Material Density Variety 0.2-2.5t/m³
Max.Conveying Length 120m
Conveying Capability velocity m/s .sixteen .16 .sixteen .sixteen .16
capability m³/h 15 23 36 fifty nine 83
velocity m/s .2 .2 .2 .2 .two
capacity  m³/h eighteen 29 forty five seventy four 104
pace m/s .twenty five .twenty five .25 .25 .25
capacity  m³/h 23 36 fifty six ninety two 130
pace m/s .32 .32 .32 .32 .32
capacity  m³/h 29 forty six seventy two 118 166

Assortment Conditions 

♦Material to be processed: _____ ♦Max. granule dimension of the feeding content: ____mm
♦Handling capability (Ps. It signifies the total ♦Percentage of Max. granule in content:_________%
substance ability feeding from the inlet): _____t/h ♦Upstream equipment (Ps. It signifies what sort of
♦Bulk Density: _____t/m3 products is used to feed the materials): _____
♦Conveying length(distance  between  ♦Downstream gear (Ps. It means what kind of
 inlet and outlet):__________m products is utilized to discharge the material): _____
♦Material dimensions:____mm ♦Installation type is horizontal or inclined : ________
♦Material temperature: _______ ºC If it is inclined,what is the inclined degree________° 
♦Water material:____% ♦Working power provide: _____V ______HZ 
♦Material is corrosive or not: ____ (Ps. Indeed or No)  

We primarily supply the subsequent gears :

Vibrating Screen Rotary vibrating display screen
Ultrasonic vibrating monitor
Gyratory screen
Trommel display
Linear vibrating monitor
Round vibrating monitor
Dewatering monitor
Vibrating feeder
Belt Conveyor Belt conveyor
Sidewall belt conveyor
Portable belt conveyor
Shuttle conveyor
Tripper
Bucket Elevator Successful bucket elevator
Belt bucket elevator
Ring chain bucket elevator
Plate chain bucket elevator
Cement bucket elevator
Silo bucket elevator
Screw Conveyor U-kind screw conveyor
Cement screw conveyor
Pipe screw conveyor
Scraper Conveyor Horizontal scraper chain conveyor
Incline scraper chain conveyor
Grain scraper chain conveyor

US $9,988-16,266
/ Set
|
1 Set

(Min. Order)

###

Structure: Chain Conveyor
Material: Carbon Steel
Material Feature: Oil Resistant, Heat Resistant, Fire Resistant
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Condition: New
Model: Ms

###

Samples:
US$ 9900/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Scraper Conveyor Technical Performance
Type MS16 MS20 MS25 MS32 MS40
Trough Width 160 200 250 320 400
Allowed Material Density Range 0.2-2.5t/m³
Max.Conveying Distance 120m
Conveying Capacity speed m/s 0.16 0.16 0.16 0.16 0.16
capacity m³/h 15 23 36 59 83
speed m/s 0.2 0.2 0.2 0.2 0.2
capacity  m³/h 18 29 45 74 104
speed m/s 0.25 0.25 0.25 0.25 0.25
capacity  m³/h 23 36 56 92 130
speed m/s 0.32 0.32 0.32 0.32 0.32
capacity  m³/h 29 46 72 118 166

###

♦Material to be processed: _____ ♦Max. granule size of the feeding material: ____mm
♦Handling capacity (Ps. It means the total ♦Percentage of Max. granule in material:_________%
material capacity feeding from the inlet): _____t/h ♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3 equipment is used to feed the material): _____
♦Conveying distance(distance  between  ♦Downstream equipment (Ps. It means what kind of
 inlet and outlet):__________m equipment is used to discharge the material): _____
♦Material size:____mm ♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC If it is inclined,what is the inclined degree________° 
♦Water content:____% ♦Working power supply: _____V ______HZ 
♦Material is corrosive or not: ____ (Ps. Yes or No)  

###

Vibrating Screen Rotary vibrating screen
Ultrasonic vibrating screen
Gyratory screen
Trommel screen
Linear vibrating screen
Circular vibrating screen
Dewatering screen
Vibrating feeder
Belt Conveyor Belt conveyor
Sidewall belt conveyor
Portable belt conveyor
Shuttle conveyor
Tripper
Bucket Elevator Efficient bucket elevator
Belt bucket elevator
Ring chain bucket elevator
Plate chain bucket elevator
Cement bucket elevator
Silo bucket elevator
Screw Conveyor U-type screw conveyor
Cement screw conveyor
Pipe screw conveyor
Scraper Conveyor Horizontal scraper chain conveyor
Incline scraper chain conveyor
Grain scraper chain conveyor
US $9,988-16,266
/ Set
|
1 Set

(Min. Order)

###

Structure: Chain Conveyor
Material: Carbon Steel
Material Feature: Oil Resistant, Heat Resistant, Fire Resistant
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant
Condition: New
Model: Ms

###

Samples:
US$ 9900/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Scraper Conveyor Technical Performance
Type MS16 MS20 MS25 MS32 MS40
Trough Width 160 200 250 320 400
Allowed Material Density Range 0.2-2.5t/m³
Max.Conveying Distance 120m
Conveying Capacity speed m/s 0.16 0.16 0.16 0.16 0.16
capacity m³/h 15 23 36 59 83
speed m/s 0.2 0.2 0.2 0.2 0.2
capacity  m³/h 18 29 45 74 104
speed m/s 0.25 0.25 0.25 0.25 0.25
capacity  m³/h 23 36 56 92 130
speed m/s 0.32 0.32 0.32 0.32 0.32
capacity  m³/h 29 46 72 118 166

###

♦Material to be processed: _____ ♦Max. granule size of the feeding material: ____mm
♦Handling capacity (Ps. It means the total ♦Percentage of Max. granule in material:_________%
material capacity feeding from the inlet): _____t/h ♦Upstream equipment (Ps. It means what kind of
♦Bulk Density: _____t/m3 equipment is used to feed the material): _____
♦Conveying distance(distance  between  ♦Downstream equipment (Ps. It means what kind of
 inlet and outlet):__________m equipment is used to discharge the material): _____
♦Material size:____mm ♦Installation form is horizontal or inclined : ________;
♦Material temperature: _______ ºC If it is inclined,what is the inclined degree________° 
♦Water content:____% ♦Working power supply: _____V ______HZ 
♦Material is corrosive or not: ____ (Ps. Yes or No)  

###

Vibrating Screen Rotary vibrating screen
Ultrasonic vibrating screen
Gyratory screen
Trommel screen
Linear vibrating screen
Circular vibrating screen
Dewatering screen
Vibrating feeder
Belt Conveyor Belt conveyor
Sidewall belt conveyor
Portable belt conveyor
Shuttle conveyor
Tripper
Bucket Elevator Efficient bucket elevator
Belt bucket elevator
Ring chain bucket elevator
Plate chain bucket elevator
Cement bucket elevator
Silo bucket elevator
Screw Conveyor U-type screw conveyor
Cement screw conveyor
Pipe screw conveyor
Scraper Conveyor Horizontal scraper chain conveyor
Incline scraper chain conveyor
Grain scraper chain conveyor

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China Drag Conveyor Chain and Sprocket     sprocket companyChina Drag Conveyor Chain and Sprocket     sprocket company
editor by czh 2023-01-21